Console Table
Assembly Instructions
We have designed our furniture with you,the customer in mind.Our clear,easy to follow
step by step instructions will guide you through the project from start to finish.
Feel confident that this will be a fun and rewarding project. The final product will be a quality piece of
furniture that will go together smoothly and give years of enjoyment.
Please do not return to the store
Broken or missing Hardware?
Need help with Assembly?
If you have any questions just call or email us.
*Special Note：We recommend the use of a hand screwdriver to avoid the stripping of screw heads.*
To p pan el
1
4
Left
3
Panel
Support Bar
5
Bottom pan el
Support Bar
Righ t Panel
Support Bar
2
5
Support Bar
5
5
(A)
12 x
W ood Dowel Bolt Lock Nut Cam Bolt Anti- Tip Small Screw Anchor Screw Stickers
Bracket
(J)
12 x
Cam Lock
8 x
(B)
8 x
(C)
12 x
(D)
2 x (E)
2 x (F) 2 x (G)
2 x
(H)
8 x
Assembling the unit with cams .
Gently screw cam
bolt into the
threaded anchor.
Insert cam lock with
arrow pointing down.
Screw the cam firmly
into locked position.
Page 2 of 5
(I)
Step 1
(D)
6 X
(J)
6 X
1.Screw Cam Bolts (D) into Bottom Panel .
2.Insert Cam Lock (J) into 2 Support Bars .
3.Connect Support Bars to Bottom Panel
5
2
5
2
by gently tightening Cam Locks (J).
(D)
(J)
(D)
(J)
(D)
(J)
(J)
(D)
2
5
(J)
5
(J)
(D)
(J)
(D)
NOTE:
Assemble console on carpet
or other soft surface to avoid
sc ra tc h in g
Step 2
(A)
8 X (A)
1.Insert Wood Dowels (A) into Left Panel
and Right Panel .
4
(D)
.
(A)
(A)
(A)
3
(A)
(A)
4
(A)
(A)
3
(C)
Step 3
4 X
(B)
4 X
(C)
1.Carefully connect Left Panel to Bottom
Panel and Support Bars using Bolts (B)
2
3
5
and Lock Nuts (C).
*Make sure threaded holes in Lock Nut(C) are facing Bolt(B) entrance hole.*
*Take extra care with Support Bars while they are awaiting Step 4.*
5
(B)
(B)
(B)
3
(C)
5
5
5
(C)
5
2
(C)
(C)
(B)
(B)
Page 3 of 5
Step 4
(B)
(B)
4 X
4 X
(C)
1.Repeat Step 3 using Right Panel .
4
Step 5
4 X (A)
5
(C)
(C)
4
(B)
(B)
5
5
(C)
(C)
2
5
(B)
(B)
(C)
3
(A)
(A)
(D)
(D)
1
(D)
(A)
(D)
(D)
6 x
(D)
Step 6
(E)
2 x
(F)
2 x
6 x
(J)
1.Insert Wood Dowels (A) into Top
Panel .
1
2.Screw Cam Bolts (D) into Top
Panel .
(J)
(J)
1
(J)
(J)
(E)
(J)
1
(F)
(J)
(F)
(E)
(F)
(D)
(A)
(A)
(J)
1.Insert Cam Locks (J) into
Support Bars .
2.Connect assembly to Top Panel
by gently tightening Cam
1
Locks (J).
3.Attach Anti-Tip Bracket (E) to
unit using small screws (F).
5
(E)
Page 4 of 5
Step 7
(G)
(G)
(H)
2 x
(H)
(G)
2 x
OPTIONA L BUT RECOMMENED
1.Place unit against wall and mark Bracket Holes.
2.Drill Hole in wall slightly smaller than Anchor (G) and then tap Anchor into hole.
3.Fasten unit to wall using Screw (H) through Bracket (E).
(H)
Step 8
8 X (I)
1.If desired,place Stickers (I) over screw holes.
2.Enjoy.
(I)
(I)
(I)
(I)
(I)
(I)
(I)
(I)
Page 5 of 5
Loading...