Page 1
Tools List (Not included)
Tape Measure
Screw
(2pcs)
Mark the position of the screw holes on the wall by
measuring the space between the mounting brackets
on the back of the vanity. Vertical position (X) is
decided by the user, remember to mark low enough
to accommodate the sink on the top of the vanity
counter or it will be to high when installed. Use a
spirit level to ensure the screws holes are in line.
Draw horizontal line
Mark the screw position
Drill the holes
for screw
Pencil Electrtic Drill
Anchor
(2pcs)
Step 1
Drill Bit
Parts List (Included)
Foam pad
(4pcs)
Insert the anchor into the screw hole for reinforcement.
Step 2
Screwdriver Silicone
Spirit Level
Attach the vanity to the wall by lowering the
bracket onto the screws.
Wall
Step 3
Use a spirit level to ensure the vanity is level from left to right
and front to back, adjust if needed.
Step 4
INSTALLATION
TIPS:
NOTE : SI N K ST YLE , SH APE , FAUCE T HO LES , CUTO UT ON TOP, VANI T Y MAY VA RY F RO M TH E PIC TU R E AB OV E.
INSTRUCTIONAL PURPOSE ONLY.
Put the integrated ceramic sink on the top of vanity, and check
if it stay firm on the vanity. If the ceramic sink is not staying
firm on the vanity, please use the foam pad to fill the gap.
Foam pad Foam pad
Step 5 Step 6
Finally, place the ceramic sink again to check the stability.
320mm
press down the
pin on this side
& pres s up t he
one on another
side to pull out
the drawer box.
Professional installation is recommended.
All Rights Reserved
Loading...