Page 1
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
WARNING:
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
Mounting Strap (A)
Fixture Mounting
Screw (D)
Ball Nut (G)
Mounting Screw (B)
Lock Nut (E) Wire Connector (F)
Strain Relief (H)
Green Grounding
Screw (C)
Installation Steps
Turn off the power at fuse or circuit box.
1. Thread two fixture mounting screws (D) to the mounting strap (A),
then secure them with two lock nuts (E)
Adjust the length of cord with strain relief(H) to achieve the desired
2.
height.
c(3")
a
d(3/8")
Fig.1
Outlet Box
House Grounding Wire
Wire Connector (F)
b(9")
Fixture Grounding Wire
Fixture Mounting
Screw (D)
Mounting Strap (A)
Mounting Screw (B)
Green grounding
Screw (C)
Strain Relief (H)
Lock Nut (E)
Canopy
Ball Nut (G)
Cable
3.4.Depending on the desired height of light fixture, you may need to cut the excess
wire. You will need at least 9 inches of wire to work with. Prepare wire by stripping
3/8 in of insulation from wire ends using wire strippers (not includded).
Attach the mounting strap (A) to outlet box by using two mounting screws (B).
5.
--Connect the L wire from the fixture to the black wire from the power source.
--Connect the N wire from the fixture to the black wire from the power source.
--Connect the BARE/GREEN ground wire from outlet box to BARE wire from fixture
using wire connector.
--Carefully put the wires back into the outlet box.
Attach the fixture canopy to the mounting strap (A) by inserting the fixture mounting
6.
screw (D), and then secure it with two ball nuts (G).
7. Attach the glass shande onto the socket and tighten the glass shade with socket ring.
8. Install 1 X 60W max medium base bulb (not included) to the socket.
Glass Holder
Glass Shade
Socket Ring
Bulb Type ST / A Max.
60W (not included)
Page 2
Turn on the power at fuse or circuit box.
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Assembly Kit (1SET)
Mounting Strap (A)
Lock Nut (E)
Mounting Screw (B)
Wire Connector (F)
Green Grounding
Screw (C)
Ball Nut (G)
Fixture Mounting
Screw (D)
Strain Relief (H)
Glass Shade (1PC)
A: 4-7/8"
B: 145-1/2"
Loading...