Page 1
- 1 -
Chandelier Lamp
Page 2
Dear Customer
Thank you to purchase our Chandelier Lamp. Our Chandelier Lamp are base on UL
safety requirements to produce and achieved their standard.
This product is equipped with safety features. Nevertheless, read the safety warnings
carefully and only use the product as described in these instructions to avoid accidental
injury or damage.
Keep this manual for further reference. If you pass this product on to someone else,
remember to give them these instruction.
Important
Always shut off power to the circuit before starting installation work. In
some countries electrical installation work may only be carried out by a
authorised electrical contractor. Contact your local electricity authority for
advice.
The product is designed for home use and is not suitable for commercial
purposes.
This appliance is not intended for use by children or those who lack the
physical, sensory or mental capabilities, or the experience and knowledge
to be able to use it safety. Children must be supervised to ensure that they
do not play with the apppliance.
The crossed-out wheeled bin symbol indicates that the item should be
disposed of separately from household waste. The item should be handed
in for recycling in accordance with local environmental regulations for
waste disposal. By separating a marked item from household waste, you
will help reduce the volume of waste sent to incinerators or land-fill and
minimize and potential negative impact on human health and the
environment.
- 2 -
DANGER to children and people with restricted capability of operating appliances.
Keep packaging materials away from children. There is a risk of suffocation !
We hope you enjoy using our Chandelier Lamp and all our products.
Page 3
- In the course of product improvement, we reserve the right to make technical and optical
modification to the product.
Components
Cable connection
Note : Make sure chain supports the weight of the light fixture
and no weight is on either supply or ground wires.
Always turn power off before installing light fixtures !
Cable Connector x 3
Ceiling mounting screws x 2
Fabric shade x 8
- 3 -
Hexagon Key x 1
Lamp post x 3
Technical specifications
Power : 120V ~ 60Hz
Bulb : E12 / Max. 25W x 8
Page 4
Installing
Fabric
shade
E 12 bulb
- 4 -
Page 5
Outlet Box Power supply cable
Cable connector
Ground wire
Mounting Starp
Mounting screw
Lock washer / Nud
- 5 -
Lamp post
Loading...