Page 1
Label Picture Description QTY
A Left Metal Leg 1
B Right Metal Leg 1
Caution : You must read this before you proceed
Computer Table
Dear Customer: Thank You for purchasing one of our products, We hope you
will enjoy it. Please be aware this Product may require 60 Minutes to assemble.
Please carefully read through the instructions below.
Note: Do not fully tighten any Bolts or Screws until all are in place.
General Care: Keep your furniture out of direct sunlight. Use desk pads and
coasters to protect the surface from dents, scatches, and moisture condensation
from hot or cold liquids.
Cleaning: For cleaning, wipe the surface with damp (not wet) cloth or wipe dry
with a clean lint free cotton cloth.
Page 1 of 14
Page 2
C Connection Pipe 2
D
Metal Connecton
Frame
1
E Glass Table Top 1
F Keyboard Board 1
G
Upper Drawer
Panel
1
H
Lower Drawer
Panel
1
I
Drawer Front
Panel
2
Page 2 of 14
Page 3
J Drawer Left Panel 2
K
Drawer Right
Panel
2
L
Drawer Back
Panel
2
M
Drawer Bottom
Panel
2
N Cabinet Left Panel 1
O
Cabinet Right
Panel
1
P
Cabinet Back
Panel
1
Page 3 of 14
Page 4
Q
Cabinet Bottom
Panel
1
R Keyboard Rail 1
S-1L Left Drawer Rail 2
S-1R Right Drawer Rail 2
T-2L Left Drawer Rail 2
T-2R Right Drawer Rail 2
Label Picture Description QTY
①
Bolt (M6x70mm) 5
②
Bolt (M6x50mm) 5
Page 4 of 14
Page 5
③
Bolt (M6x35mm) 5
④
Bolt (M6x30mm) 5
⑤
Bolt (M6x25mm) 5
⑥
Screw
(M5x70mm)
5
⑦
Screw
(M5x55mm)
17
⑧
Screw (M4x6mm) 2
⑨
Drawer Handle
and
3
⑩
Screw
(M.5x14mm)
21
⑪
Keyboard
Connection Tray
4
⑫
Adjustable Glider
Foot
5
⑬
Nut (M6) 5
⑭
Cam Bolt 5
⑮
Cam Lock 5
⑯
Screwdriver 1
⑰
Spanner 1
Page 5 of 14
Page 6
Step 1
Overview
This Computer Table has multiple parts and may require up to 60 minutes to
assemble. To give you an overview of the Computer Table parts, the above
picture is to help you put the various parts into perspective. Please read through
the instructions below to familiarise yourself with the parts and steps before
assembly.
Attach the Adjustable Glider Feet(⑫) to the bottom of the Left Metal Leg(A) and
Right Metal Leg(B) by hand or with Screwdriver(⑧).
⑯
Page 6 of 14
Page 7
Step 2
Step 3
Step 4
Attach Connection Pipes(C) between Left Metal Leg(A) and Right Metal Leg(B)
using Bolts(①) with Screwdriver(⑯).
Attach Metal Connection Frame(D) between Left Metal Leg(A) and Right Metal
Leg(B) using Bolts(②) with Screwdriver(⑯).
Disassemble the Keyboard Rails(R) by first pushing up on the locking
mechanism and then pulling the Rails apart as shown in the picture.
Page 7 of 14
Page 8
Step 5
Step 6
Step 7
Attach Keyboard Connection Trays(⑪) under Connection Pipes(C) using
Bolts(③), and Nuts(⑬) with Screwdriver(⑯) and Spanner(⑰).
Insert Cam Lock(⑮) into the mounting positions on Cabinet Bottom Panel(Q).
Note: Ensure the arrow labelled "+ - " on the Cam Lock head points
towards the Cam Bolt mounting positions.
Attach Keyboard Rails(R-1) to Keyboard Connection Trays(⑪) using Bolts(⑧)
with Screwdriver(⑯) using the mounting positions as indicated in the picture.
⑰
Labelled "+ -"
Page 8 of 14
Page 9
Step 8
Step 9
Step 10
Attach Cam Bolt(⑭) at the bottom of Cabinet Left Panel(N) and Cabinet Right
Panel(O) with Screwdriver(⑯).
Attach Cabinet Bottom Panel(Q) between Cabinet Left Panel(N) and Cabinet
Right Panel(N) by inserting Cam Bolt(⑭) into the mounting position of Cabinet
Bottom Panel(Q).
Then turn the Cam Locks(⑭) with Screwdriver(⑯) until they all lock into place.
Attach Left Drawer Rails(S-1L) to Cabinet Left Panel(N) using Screws(⑩) with
Screwdriver(⑯).
Attach Right Drawer Rails(S-1R) to Cabinet Right Panel(O) using Screws(⑩)
with Screwdriver(⑯).
Page 9 of 14
Page 10
Step 11
Step 12
Step 13
Attach Cabinet Back Panel(P) between Metal Connection Frame(D), and
Cabinet Left Panel(N) and Cabinet Right Panel(O) using Screws(⑥) with
Screwdriver(⑯).
Note: As the Cabinet is heavy, take care of your safety and have an adult
Attach Cabinet Left Panel(N) and Cabinet Right Panel(O) to Connection
Pipes(C) using Screws(⑦) with Screwdriver(⑯).
Note: As the Cabinet is heavy, take care of your safety and have an adult
helper to hold the Cabinet.
Attach Drawer Handles(⑨) to Drawer Panel(G) and Drawer Panel(H) using
Bolts(⑨) with Screwdriver(⑯).
Page 10 of 14
Page 11
Step 14
Step 15
Step 16
Slide/Insert the Drawer Bottom Panel(M) into the grooves of the Drawer Frame.
Insert the Drawer Front Panel(I) between Drawer Left Panel(J) and Drawer Right
Panel(K) and attach using Screws(⑦) with Screwdriver(⑯).
Attach Drawer Left Panel(J) and Drawer Right Panel(K) to Drawer Back Panel(L)
using Screws(⑦) with Screwdriver(⑯).
Page 11 of 14
Page 12
Step 17
Step 18
Step 19
Attach Drawer Panel(G) to Drawer Front Panel(I) using Bolts(⑤) with
Screwdriver(⑯).
Repeat the entire process from Step 14 to Step 17 to assemble the second
Drawer and Drawer Panel(H).
Turn the assembled Drawers over and attach Drawer Rail(T-2L) and Drawer
Rail(T-2R) to the two bottom edges at the preset mounting positions using
Screws(⑩) with Screwdriver(⑯).
Note: Repeat the same process with the second drawer. Upon completion
of assembly of all drawers, put aside.
Page 12 of 14
Page 13
Step 20
Step 21
Step 22
Attach Keyboard Rails(R-2) to Keyboard Board(F) using Screws(⑩) with
Screwdriver(⑯).
Note: Only use the mounting postions indicated in the above picture.
Carefully place the Glass Table Top(E) onto the fully assembled Frame and
attach using Bolts(④) with Screwdriver(⑯).
E
Page 13 of 14
Page 14
What is Proposition 65?
Proposition 65 is a California law that requires warning labels on products that may contain one of
more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard
Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity. Chemicals and
elements on this list include wood dust, brass, and other everyday substances, which can be found in
very common household items, such as: lamps, tableware, jewelry, crystal glasses, electric cords,
beauty products, automobiles, and furniture.
Why Did I Find a Proposition 65 Warning on My Home Goods Product?
We include Proposition 65 warnings on all of our products because there is always a chance that one
of the 800-plus common chemicals and ingredients listed under this law could potentially be on our
furniture or packing materials. We risk large fines under this law, if we don't include this warning.
Should I worry?
We realize you may be worried finding this warning on our products, but we want to reassure you that
the hazardous exposure limits for any of these chemicals have never been found on furniture products
that we’ve shipped to our customers. Additionally, this warning label is very common and can be
found on almost every piece of furniture sold in the state of California.
Just How Common Are Proposition 65 Warnings?
Proposition 65 warnings have become so common in California that it is hard to take a trip to a local
bank, grocery store, or restaurant without finding at least one warning. In fact, even the Disney Land
Resort has a Proposition 65 warning:
Insert Drawers(G & H) into the Cabinet.
Insert the Keyboard Board(F) into the Keyboard Tray as shown.
Your Computer Table is ready for us.
This Computer Table can only be used on a flat, level surface.
Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Do not write on furniture without a padded barrier to protect the surface.
Do not place furniture outside . For indoor use only .
Do not place furniture near heating or cooling vents.
Do not place furniture under direct sunlight.
Not for commercial use. For residential use only .
Children should not climb or jump on the furniture.
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Page 14 of 14
Loading...