Page 1
Label Picture Description QTY
A Seat Board 1
B Backrest 1
C Seat Cushion 1
D Back Cushion 2
Caution: You must read this before you proceed
Corner Sofa
1 OF 5
Page 2
Label Picture Description QTY
①
Allen Key 1
②
Bolt
(M6*40mm)
7
③
Washer 7
Before Beginning Assembly:
2 OF 5
Page 3
Open the carton and place all the parts onto a clean, non-marring surface.
Place the Backrest(B) with it's inside facing up.
Attach Seat Board(A) to Backrest(B) using Bolts(②) and Washers(③) with Allen Key(①)
as shown in the picture above.
Tighten the Bolts fully in a sequential manner.
Note: Occasionally some of the PE Wicker shifts and covers the mounting positions
preventing easy assembly. The PE Wicker should never be cut, but moved away
from the mounting positions.
Step 1
This Corner Sofa has multiple parts and may require up to 30 minutes to
assemble. To give you an overview of the Corner Sofa parts, the above
picture is to help you put the various parts into perspective. Please read
through the instructions below to familiarise yourself with the parts and steps
before assembly.
FRONT FACING
Backrest (B)
Seat Board (A)
Back Cushion (D)
Seat Cushion (C)
3 OF 5
Page 4
Step 2
Step 3
Place the Seat Cushion(C) and Back Cushions(D) on the Corner Sofa.
Your Corner Sofa is ready for use.
This Corner Sofa can only be used on a flat, level surface.
Then, with the assistance from an adult partner, stand the Corner Sofa upright.
Adjust the Pre-installed Levellers until the Corner Sofa is level with the ground.
To adjust the Levellers, with the assistance from an adult partner, tilt the Corner Sofa to
rest on two feet.
Adjust the levellers to the desired height to avoid wobbles.
adjust height for
balance
adjust low for
balance
4 OF 5
Page 5
5 OF 5
Loading...