Ebern Designs W000881737 Assembly Instructions

Floor Lamp
PARTS
Assembly Instructions
Instrucciones De Asamblea
Instructions d’Assemblée
A
B
C
Important Safety Instructions
Warning
D
D
x 5
E
x 5
F
F
E
This lamp takes a 25 watt type B bulb. Do not use any bulb greater than 25 watts as it can be dangerous and may result in a re. Do not use polishes or cleaners on this lamp. Wipe clean with a dry cloth.
Assembly
1. Unpack all parts from cartons carefully.
2. Thread bottom tube (B) clockwise onto base (A) until tight.
3. Thread top tube (C) clockwise onto bottom tube (B) until tight.
4. Attach the lampholder (D) to top tube (C) by threading clockwise until tight.
5. Unscrew retainer ring (F) from socket.
6. Put shade (E) on top of lamphoplder (D) then thread retainer ring (F) clockwise onto socket to secure the shade.
C
B
A
Loading...