Page 1
A. Back legs B.Middle leg C. Front legs D. Allen key E. Flat washer F. Bolts
3 pcs 2 pcs 1 pc 4 pcs 4 pcs
ASSEMBLY INSTRUCTIONS
1. Please Have the sofa bed on its top side on a flat
surface, make sure there are not any sharp objects
underneath the sofa. There will be a velcro Underneath
Shown in the photo , inside you will find the legs to
complete the sofa bed.
2.
Please note which side is the front and back ,
you can tell by the main bottom frame where it
is closer to the end is the front as shown in the
photo.
The Back Legs Can be twisted into the holes .
The front legs will require bolts to be put on with
the Hex key on the front. Make sure one
washer is put onto each bolt before assembly .
Once All four legs are tightened , two or more
people are required to flip over the sofa bed
1
A
B
2
This sofa bed can be converted into a sofa or lounger in multiple angles, please see the images below.
Front
Attention : To Change Sofa Positions , Place your hands in the middle of
the Sofa To ensure both mechanisms are in sync
Front
C
Loading...