Ebern Designs CRHM1128 Installation & Assembly

Page 1
Caution : You must read this before you proceed
Arm Chair
Picture
Label Picture Description QTY
A Right Armrest 1
B Seat Panel 1
C Backrest 1
D Left Armrest 1
E Seat Cushion 1
Page 1 OF 6
Page 2
Label Picture Description QTY
Before
Beginning
Assembly:
*5
*5
Page 2 OF 6
Page 3
Step 1
Open the carton and place all the parts onto a clean, non-marring surfacePlace the Right Side Panel(A) with its inside facing up. Step1.1:Align the Seat Panel(B) to Right Leg(A) as shown in the picture. Step 1.2:Attach the Seat Panel(B) to the Right Leg(A) using Bolts() with Allen Key() as shown above.
Do not fully tighten the Bolt.
Overview
This Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Right ArmrestA
Seat Panel B
Backrest(C
Left Armrest(D
Seat CushionE
FRONT FACING
Step:1.1
Step:1.2
Page 3 OF 6
Page 4
Step 2
Step 3
Step 3.1:Align Seat Panel(B) and Backrest(C) to the Left Leg(D) toas shown in the picture above. Step 3.2: Attach Left Leg(D) to Backrest(C) using Bolts() with Allen Key() as pictured above. Step 3.3:Attach Left Leg(D) to Seat Panel(B) using Bolts() with Allen Key() as shown above.
Do not fully tighten the Bolt.
Step 2.1Align Backrest(C) to Right Armrest Leg(A) as shown in the picture. Step 2.1: Attach the Seat Panel(B)to the Right Leg (A) using Bolts() with Allen Key() as shown above.
Do not fully tighten the Bolt.
Step:2.1
Step:2.2
Step:3.1 Step:3.
Step:3.
Page 4 OF 6
Page 5
Step4
Step 5
Put Seat Cushions(E)on the Chair. Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
Stand the Arm Chair up. Place the Arm Chair on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and carefully, sit onto to the Arm Chair. This will help to align all parts at all joints. Then carefully get off the Chair, and in a sequential manner, proceed to tighten all Bolts.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one. This may cause the frame to warp. If there are still wobbles, loosen the Bolts and execute the same process.
If the Chair is not stable it could lead to damage to the product. Note: This step is done best with the assistance of a second adult.
Seat cushion(E)
Page 5 OF 6
Page 6
What is Proposition 65?
Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity. Chemicals and elements on this list include wood dust, brass, and other everyday substances, which can be found in very common household items, such as: lamps, tableware, jewelry, crystal glasses, electric cords, beauty products, automobiles, and furniture.
Why Did I Find a Proposition 65 Warning on My Home Goods Product?
We include Proposition 65 warnings on all of our products because there is always a chance that one of the 800-plus common chemicals and ingredients listed under this law could potentially be on our furniture or packing materials. We risk large fines under this law, if we don't include this warning.
Should I worry?
We realize you may be worried finding this warning on our products, but we want to reassure you that the
hazardous exposure limits for any of these chemicals have never been found on furniture products that we’ve
shipped to our customers. Additionally, this warning label is very common and can be found on almost every piece of furniture sold in the state of California.
Just How Common Are Proposition 65 Warnings?
Proposition 65 warnings have become so common in California that it is hard to take a trip to a local bank, grocery store, or restaurant without finding at least one warning. In fact, even the Disney Land Resort has a Proposition 65 warning:
Do not clean furniture with harsh cleansers or polish.
Do not put hot items directly on furniture surface
Do not write on furniture without a padded barrier to protect the surface.
To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine. Whenever possible cover the
product and /or place under patio or awnings.
To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct
sunlight is recommended.
Not for commercial use. For residential use only .
Stains may be removed with mild soap solution and damp cloth.
Dust and pick-up spills using a clean, non-colored, lint-free cloth .
Children should not climb or jump on the furniture.
Loading...