EBAA Iron 7502 Installation Manual
Series 7502
Restraint for IPS O.D. (Class) PVC Pipe at PVC Fittings
Installation Instructions
1. The Series 7500 is designed for restraining ASTM D2241 PVC pipe to
molded PVC ttings. It has a split, serrated restraint ring on the spigot
and a split nonserrated ring on the tting.
2. Assemble the tting per the tting manufacturer’s instructions.
3. Install both halves of the split non-serrated bell ring on the tting behind the gasket hump. Install the side bolts and tighten each evenly to
110 ft-lbs of torque. (40 ft-lbs on 2 inch through 3 inch, 60 ft-lbs on 4
inch through 6 inch)
4. Slide the bell ring toward the gasket hump so that it ts snugly behind
the gasket hump.
5. Remove the side bolts from the serrated restraint ring. Use the tie
bolts to determine the proper location of the restraint ring on the spigot. Allow enough room on the tie bolt to fully engage the nuts.
CONTENTS
Qty. Description
1 2 in. 6500 Restraint
1 2 in. 7500 Bell Ring
2 Low Alloy Steel Tie Rods w/
Nuts
Restraints Made in The USA
6. Install both halves of the restraint ring at the proper location, tapping
each half into place. Make sure that the complete ID of the ring is
touching the pipe before installing the side bolts. Tighten the side bolts
evenly to 110 ft-lbs of torque. (40 ft-lbs on 2 inch through 3 inch, 60 ftlbs on 4 inch through 6 inch)
7. Place nuts on the tie bolts and tighten until they are snug. Allow
enough room on the tie bolt to fully engage the nut with several
threads showing. Do not tighten these bolts enough to force the spigot
further into the bell of the tting.
0210-G
APPROXIMATE SHIPPING WEIGHT: 5.40 lbs.
Series 7502
Restraint for IPS O.D. (Class) PVC Pipe at PVC Fittings
For use on water or wastewater pipelines subject
to hydrostatic pressure and tested in accordance
with either AWWA C600 or ASTM D2774
Copyright 2018 © EBAA IRON, Inc. All Rights Reserved
EBAA IRON SALES, Inc.
P.O. Box 857, Eastland, TX 76448
Tel: (254) 629-1731
Fax: (254) 629-8931
Toll: (800) 433-1716
contact@ebaa.com
www.ebaa.com
75020000
Made in the USA
Loading...