EBAA Iron 6503 Installation Manual
Series 6503
Pipe Bell Restraint Harness for IPS O.D. (Class) PVC Pipe
Installation Instructions
1. The Series 6500 is designed for restraining push-on, ASTM D2241
PVC pipe bells. It has a split, serrated restraint ring on the spigot and
a split serrated ring behind the bell.
2. Assemble the push-on joint per the pipe manufacturer’s instructions.
3. Install both halves of the serrated bell ring behind the bell, tapping
each half into place. Make sure the complete ID of the ring is touching
the pipe before installing the side bolts. Install the side bolts and tighten evenly. (40-45 ft-lbs on 2 through 3 inch, 60 ft-lbs on 4 and 6 inch,
110 ft-lbs on 8 through 12 inch)
4. Remove the side bolts from the second serrated restraint ring. Use the
tie bolts to determine the proper location of the restraint ring on the
spigot. Allow enough room on the tie bolt to fully engage the nuts.
CONTENTS
Qty. Description
2 3 in. 6500 Split Restraint
Ring
2 Low Alloy Steel Tie Rods w/
Nuts
5. Install both halves of the restraint ring at the proper location, tapping
each half into place. Make sure that the complete ID of the ring is
touching the pipe before installing the side bolts. Install the side bolts
and tighten evenly. (40-45 ft-lbs on 2 through 3 inch, 60 ft-lbs on 4 and
6 inch, 110 ft-lbs on 8 through 12 inch)
6. Place nuts on the tie bolts and tighten until they are snug. Allow
enough room on the tie bolt to fully engage the nut with several
threads showing. Do not tighten these bolts enough to force the spigot
further into the bell of the joint.
0912-O
APPROXIMATE SHIPPING WEIGHT: 6.20 lbs.
Series 6503
Pipe Bell Restraint Harness for IPS O.D. (Class) PVC Pipe
Restraints Made in The USA
For use on water or wastewater pipelines subject
to hydrostatic pressure and tested in accordance
with either AWWA C600 or ASTM D2774
Copyright 2018 © EBAA IRON, Inc. All Rights Reserved
EBAA IRON SALES, Inc.
P.O. Box 857, Eastland, TX 76448
Tel: (254) 629-1731
Fax: (254) 629-8931
Toll: (800) 433-1716
contact@ebaa.com
www.ebaa.com
6503000000
Made in the USA
Loading...