EazzyDV IB-185W, IB-183, IB-185Y, IB-185WM, IB-183M User Manual

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 2 / 36 www.eazzydv.com

Table of Contents

1. Summary

1.1 Overview …………………………………………………………………………....P4

1.2 Key Functions ……………………………………………………………………..…..P4

1.3 Specifications………………………………………………………..……....................P5

1.4 Package content……………………………………………………………..……..…..P7

1.5 Attention…………………………………………………………………...…...……...P7

2. Product layout..………………………………………...…………………….....................P8

3. Installation…. ………..……………………………………..………………....................P12

4. Client Software Installation ………………………………………………………......P13

5. Operation mode ………...…………………………………………………….………….P16

6. Online watch ..………………………………………………………………...................P21

7. Download recorded video ………………..……………………………………………..P22

8. Set Motion Detection, Email Alerts ……………………………………………………P23

8.1 Push Message Setting ……………………………………………………………….P23

9. Listening and Speaking ….……………………………………………………………P26

10. Video Recording Methods …………………………….………………………………P27

11. Reset Camera ………………………………………………………………………….P27

12. Light Control ………………………………………………………………………….P28

13. Indication Light Meaning ……………………………………………………………..P29

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 3 / 36 www.eazzydv.com

14. Ports Forwarding……………………………………………………………………….P29

15. Advanced Setting for Professional …………………………………………………….P29

16. Advanced Setting for Professional –update patch …………………………………….P30

17. Accessory…………………………………………………………………………………P32

18. Trouble Shooting ………………………………………………………………………..P34

19. Disclaimer ……………...……………………………………………………………….P36

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 4 / 36 www.eazzydv.com

1. Summary

1.1 Overview

It is a WiFi enabled IP Network CCTV Security Digital Video Recorder (DVR) camera, also can be

used a real lamp. This is an innovative design and is being patented. The idea is very simple to use

and can be used worldwide. Just insert a Micro-SD card, screw-in like a bulb, turn on the power, and

it will be automatically recording by itself. When using this device, no drilling holes and no cabling

is required, just using the existing bulb holder is enough. There is no need for any technical

background, if you know how to replace a normal bulb, then you will know how to install this

device.

Besides, you can use your mobile phones or computers to remotely access it via internet, enabling

you to see, hear and speak what is happening. It can be broadly used in any environment and can be

setup by yourself, no matter if it is at home, office, factory, shopping mall, restaurant and so on.

1.2 Key Functions

Function

Description

Provide true HD 960P resolution 1280x960/1280x720

pixels.

WiFi mode acts like a mobile device like your mobile

phone joining an existing wifi router and then able to be

accessed it at outside world via internet.

Using H.264 compression, delivers high quality video and

a superb compression ratio.

Onvif compatible that means video can be saved to

ONVIF supported NVR machines for backup large

volume video files

Using Peer-to-Peer technology, no need setting on routers

and no need DDNS and no need IP address setting, just

plug and play.

Local storage using Micro-SD card, accepting 2GB-32GB,

32GB card can store 12 days video files, recommend using

CLASS 10 card.

When there is motion detected, it will trigger alarms by

email alert or push warning message to mobile phone.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 5 / 36 www.eazzydv.com

When there is motion detected, email alert can send 3

pictures to your dedicated email account

Two ways communication, able to hear sound from bulb

camera on mobile phones and PCs, and able to speak out

through speaker

Camera body is Extendable, rotatable and adjustable

Built-in IR-cut, no color casting

1.3 Specifications

System

Embedded Linux OS

Using industrial grade TI solution CPU, TIDM365

Image Sensor

1/3" CMOS progressive sensor,1.3M pixels

Video

H.264 Compression Format

Resolution : 960P (1280*960)720P (1280*720) / VGA (640*480) /

QVGA(320*240)

Frame Rate : 0 – 25 FPS

Data Rate : 32Kbps – 2.0M Kbps

Light intensity, contrast ratio, saturation level are adjustable

Network

Using Peer to Peer (P2P) technology, no need configuration and no

DDNS

Support two modes, AP mode and WiFi mode :

AP mode – For local usage, no need internet remote access and no

need to connect to wifi router

WiFi mode – Connect to wifi router and to be accessed via internet

Wi-Fi compliant with wireless standards IEEE 802.11b/g/n

Support both WEP & WPA WPA2 encryption for wireless

Wireless transmission distance in open area around 100 meters

APP / Software

On line viewing and control via iPhones、iPad、Android Smart
Phones、Wins PC、Notepads、Notebooks、

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 6 / 36 www.eazzydv.com

Free client software for mobile phones and computers

One software can display max. 64 bulbs on PC

4 bulbs on Android/iPad/Notepads

1 bulb on iPhone

Simple installation, just download and launch it. No configuration

and no setup at all.

Camera Body

Rotatable camera body (360 degree)

Adjustable len viewing point (90 degree)

Extendable camera length (from length 165mm to 185mm)

Storage

Local storage, support Micro-SD card, 2GB-32GB (class10 card

recommended)

32GB card can store 12days video by using VGA(640*480) format

Support looping and motion detection recording

Recorded files can be remotely downloaded to computer or mobile

phone for viewing

Support client side recording, on PC or mobile phones

ONVIF

Compatible to ONVIF supported NVRs, video can be centrally

stored on NVR machines

Alarm

Motion detection triggering email alert
Motion detection triggering mobile phone push alert

LEN

2.8mm, 120 degree viewing angle, 3.0M pixels

Min.

Illumination

0.5 Lux

IR-CUT

Auto IR-Cut basing on light sensor

Audio

ADPCM Format

Built-in microphone and speaker

Through Client software able to hear sound and able to speak

Cover

Crystal / Mirror for selection

LED

25pcs of 0.2W White /Yellow LED /

2pcs of 3W White LED

IR LED

4pcs of IR LEDs, night vision distance about 5-10 meters /

2pcs of IR LEDs, night vision distance about 15-20 meters

Motion

Detection

Motion detection distance 5 meters

Adapters

E27/E26/B22 optional

Voltage

Worldwide usage, AC 100-240V

Backup battery

Must have 5V 2A output port

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 7 / 36 www.eazzydv.com

type

Power

Consumption

< 5W

Operation

Temp.

-20~ 60℃
Weight

Gross: 379g with box / Camera only : 120g

Dimension

Normal 72 x 165mm / Extend 72 x 185mm

Box size

200*105*85 mm (L*W*H)

1.4 Package Content

1 x iSmart WiFi IP Network DVR Camera (not include memory card)

1 x Instruction Note

1 x Quick setup manual

1 x Remote Control
1 x Battery connection cable (optional, only for battery backup option selected)

1.5 Attention

1. Before replacing the camera, please ensure the power is OFF and the circuit

voltage is within the operation range (100 – 250V AC)

2. Please hold the plastic enclosure of the camera during installation or removal

to ensure safety

3. If a camera has been running for more than 2hrs with IR light On, the plastic case will be little bit

warm, which is normal, and the metal part will be warm too. But when IR light off, it will cool

down quickly.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 8 / 36 www.eazzydv.com

2. Product Layout

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 9 / 36 www.eazzydv.com

Buttons

Button

Function

Picture

Micro-SD card slot

/TF card slot

Micro-SD card, accepting 2GB-32GB,

recommend CLASS 10 card.

Reset

Press “R”button and hold for 5

seconds, hearing a sound from

speaker, then release hand. The device

will be restored to factory out settings

(factory mode)

Another way to reset is pressing reset

button on remote, same as press reset

button.

Adjustment of Camera body

Adjustment Section

Action

Picture

Extend Length

Pull to extend or shorten the length.

Turn right to lock it after

extend/shorten the length

Turn left to unlock it then it is able to

extend or shorten the length

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 10 / 36 www.eazzydv.com

Rotation 360 degree

Turning left or right of camera body to

make camera in right position.

Adjust camera

viewing point

Holding head section of camera body,

turning it to achieve right viewing

angles.

Indication Lights Meaning

Light Color

Meaning

Picture

Blue

Camera is booting, not ready to use

Red

Camera is ready to use

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 11 / 36 www.eazzydv.com

Blue Flashing

Blue light will keep flashing. Two area

would occur this situation.

1. If entered wrong password of wifi

router when switching from factory

mode to wifi mode

2. If wifi router is down

Connection with Backup Battery

Backup battery feature is an optional item. There is basic requirements to backup battery. That is must

have 5V 2.0A or above output port. Connection between backup battery and camera is using

provided battery connection cable in the packing. Once power failure of bulb camera, the battery will

auto provide power to camera to keep running. Once power up, camera will use power from socket, not

using power from battery anymore.

If backup battery's output port can not reach 5V 2A or above, the camera will repeat rebooting

itself.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 12 / 36 www.eazzydv.com

3. How to install

1. Insert a Micro SD card (2GB-32GB, format it for first time usage) into the camera card-slot

1.1. Before screwing-in the camera, ensure the socket power is off and the voltage is

within the operation range (AC 100 – 250V)

2. Screw-in the camera into a bulb holder just like a bulb

3. Turn on power

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 13 / 36 www.eazzydv.com

4. Client Software Installation

Client APP for mobile phones are available on Apple Store and Google Play for

download, the APP name is called “BulbCam” or you can follow below

procedures to download from our website (www.bulbcam.net)

4.1 Android Smart Phones

Scan to install

Or download at http://www.bulbcam.net/download/bulbcam.apk

Software name : BulbCam

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 14 / 36 www.eazzydv.com

4.2 iPhone /iPad

Scan to install

Or search “BulbCam” in APP Store and install it

Software name : BulbCam

4.3 Win PC

Download it from http://www.bulbcam.net/download/bulbcam.zip

Unzip the file

Click “bulb cam.exe” to install it

Software name : BulbCam

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 15 / 36 www.eazzydv.com

4.4 MAC

Software name : BulbCam

Download it from http://www.bulbcam.net/download/bulbcam.dmg

Install it

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 16 / 36 www.eazzydv.com

5. Operation Mode

This device supports two operation modes.

Mode Name

Function

Factory Mode

When bulb cameras come out from factory that is in this

mode. To make it work, it has to connect to a wifi router.

In any stage, pressing RESET button will revert back to
this mode.

WiFi Mode

Connection to an existing WiFi router., then bulb

cameras are able to be accessed via internet or local
network. Each bulb has a device ID that is used to

identify its identity in internet world.

Remarks:

Below diagram shows how bulb camera is connected with wifi router under a network

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 17 / 36 www.eazzydv.com

5.1 Switching from Factory Mode to Wifi Mode by mobile phone

When bulb cameras come out from factory, each camera has a unique ID (eg. LH00xxxx). This is

known as a device ID and acts as its identity when it is connected to internet world.

Below is the procedure switching from Factory mode to Wifi mode by using a mobile phone.

picture from iPhone

Search Bulb camera's ID under

mobile phone's WiFi section

ID : LH0000xxx
Pwd. : 88888888
(stuck at the back of package box)

Select the ID, and key in

Password (88888888)

If unable to find the ID, reset
the bulb camera by reset button
on camera or by press reset
button on remote

Open APP "BulbCam" in

mobile phone

Tap “Local” or “LAN”,

Tap ">" of a Device ID

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 18 / 36 www.eazzydv.com

Pictures from Android Phone

After bulb camera joining an existing WiFi router, devices (like Andriod smartphone/ iphone/ ipad/

PC/MAC/Notepad.. ) are able to access it over WAN/LAN network. If the WiFi router is connected to

internet, then the bulb camera can be accessed worldwide.

Remark : Bulb camera’s device ID (like LH00xxxx) is its identity and it is for WAN connection. This ID
is used as a login account no.

Select “WiFi” function

Select WiFi Router SSID by

pressing “SEARCH” button and

then press GREY triangle part to

select. After that key in Router’s

WiFi password. Bulb camera will

reboot automatically

Bulb camera will be connected to

current router after 2 minute later

Press RESET button (if wrong

SSID or PWD entered, or not

found after 2 mins ), repeat

setup procedure again

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 19 / 36 www.eazzydv.com

5.2.1 WiFi Mode Trouble Shooting Strategy

If you cannot connect bulb camera to a WiFi router even when password and everything else is correct.

The problem may be caused from the WiFi router setting. Please read below instructions, There are some

key points you must be aware of:

1. Router’s DHCP service must be enabled. Bulb camera depends on it to get IP

address.

2. Router’s SSID must have no spaces in between, that means formats like “my ssid”

is not acceptable; only “myssid” acceptable

3. For the Router’s wireless channel, we would suggest using no. “13” (some old

router without channel 13, then select channel 11)

4. For the Router’s security method, we would suggest using “WPA2-PSK” (AUTO is

not recommended, WEP is not working)

5. For the Router’s encryption method, we would suggest using “AES” (AUTO is not

recommended)

5.3 Switching from Factory Mode to Wifi Mode by PC/Notebook

If your mobile phone is not available, you can also use pc software to change WiFi setting. The steps are :

5.3.1 Use PC/Notebook wifi, connect to bulb camera. Each bulb camera has unique device ID

5.3.2 Input password "88888888"

5.3.3 Run PC software "bulbcam.exe"

5.3.4 Under LAN section, a bulb camera ID shown

5.3.5 Right click mouse button, select "Device settings"

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 20 / 36 www.eazzydv.com

5.3.6 Select "Wireless Setting"

5.3.7 Press “Scan” button at right hand side of screen, then select the router SSID from list box

5.3.8 Select Wireless security type “WPA2-PSK” [Do not choose WEP, also Router do not use WEP as

security type].

5.3.9 Select Data Encryption “AES”.

5.3.10 Manually typing Router’s WiFi password. After that press “Apply” button, bulb camera will

reboot.

5.3.11 Switch PC/Notebook to same network as bulb camera. Under bulbcam software, bulb camera will

be listed there under LAN section.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 21 / 36 www.eazzydv.com

6. Online watching

In our APP / PC software design, there are two types of live watching modes, Local and WAN.

Their explanations are listed below :

Watch Types

Description

LAN / Local

PC

Mobile phone

If you are at home or office, and the bulb camera is under same local area

network that means all are using same router , then you can use Local/Lan

type to watch online. There is no need to login into account, and acessing

speed is much faster.

WAN / Remote

PC

Mobile phone

If you want to access bulb camera from outside via internet, then select WAN

tab. It requires logging in to an account. The device ID (LH0xxxxx) of bulb

camera is the account no. and the password is 123456. You can change

password after login.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 22 / 36 www.eazzydv.com

7. Download recorded video

If a micro-SD card has been placed inside a bulb wifi dvr camera, when it is switched on, it will

automatically record videos by itself. To preview the content of Micro-SD card, you can download

recorded video files from bulb camera to your computer by using the function “SD File Download” in

PC client software.

Select a bulb camera in list -> click right hand mouse button -> select “Device Settings” -> Click “SD
card search recorded” ->click

“Search"

->Click on a file to download -> when download done,

click to preview

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 23 / 36 www.eazzydv.com

8. Set Motion Detection, eMail Alert

There are two alarm types, Email Alert and Push Message Alert (for Mobile phone). But these alarms

are based on Motion Detection, i.e. when a motion is detected, these functions will be triggered.

Set Motion Detection and Email Alert:

On mobile phones:
Select a bulb camera in device list of local section, tag “>” -> select “Alarm Settings” -> Set

“Alarm sensitivity” to “High”, tick Motion detection checkbox.

If you want Email Alert, then go to Email section, fill in email alert fields. “Reciever E-mail”,

“Sender E-mail”…and so on. All are needed.

***Here you need smtp-server and smtp port information, if you don’t have them you have to ask

your email Service provider. But these information can be filled-in later on.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 24 / 36 www.eazzydv.com

On PC

Select a bulb camera in device list of LAN section, click right hand mouse button -> select "device

setting"->select "Trigger conditions"->select “Alarm

Alerts/Email” -> Tick “Motion Detection” box

If you want Email Alert, then fill in other fields. “Reciever E-mail”, “Sender E-mail”…so on, all

needed.

*** Here you need smtp-server and smtp port information, if you don’t have them you have to ask

your email Service provider. But these information can be filled-in later on.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 25 / 36 www.eazzydv.com

8.1 Push Message Setting

To set up push message, the motion detection feature must be ENABLED first.

Login a bulb camera using its DEVICE ID (must be in capital letter) and PASSWORD , after login
click “more” button, and then select “General”,

Enable “Motion Detection” and “Photograph sound”, after that keep account in login (do not sign out),

if there is motion detected, it will be shown in “Alarm” message list, for Android smart phone the push

message will be shown in Notifications also.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 26 / 36 www.eazzydv.com

9. Listening and Speaking

On Mobile phone

When in viewing mode, click and then click the headphone logo to hear sound

If it is connected to a speaker, then click to speak

On PC

When in viewing mode, there is a headphone logo , click to hear sound, or click to

speak.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 27 / 36 www.eazzydv.com

10. Video Recording Methods

There are three methods to record videos

1. Built-in Micro-SD card storage device - just simply insert a card then it will automatically start

recording

2. Recording on Mobile phone or Computer – when watching a bulb camera online on mobile phones

or computers, simply press the button with a video sign , and it will start recording videos.
The video files are stored in the watching device.

3. Network Video Recorder device – the NVR machine which supports ONVIF protocol can connect

to the bulb camera, recording videos onto it. This is suitable when large video file storage is

required, e.g. there are few bulb cameras and centralized manage storage is needed.

11. Reset camera

There are two methods to reset bulb camera to factory mode(factory setting)

1. Reset button

Press and hold the reset button "R" for around 5 seconds, you will hear a sound from speaker and

blue light flashing 3 times, then release hand. Bulb camera will reboot and return all settings to

factory-set value.

2. Reboot button

Some models come with a remote control. Just press “Reboot” button on remote control, then bulb

camera will reboot by itself and return all settings to factory-set value.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 28 / 36 www.eazzydv.com

12. Light Control

12.1 Switch On/Off light

Light switch On/Off feature only applies to some models with normal LEDs. Not every model has

this feature.

To switch On/Off, open APP and in LAN section, choose a camera, tap “>” -> “Camera Light” ->

select “ON/OFF”

12.2 Motion Detection with light

Light can be controlled basing on motion detection. Once motion detected, the light will be ON

automatically, if there is no motion, the light will be OFF.

To enable this function, Motion Detection feature must be ON first, then open APP and in LAN

section, choose a camera, tap “>” -> “eHome Security” -> select “Enable / Disable”

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 29 / 36 www.eazzydv.com

13. Indication Light Meaning

There are two states of indication light: Blue and Red

Blue means the system is in booting stage, not ready for connection.

Red means the system is ready for connection.

14. Ports Forwarding

It uses P2P (peer to peer) technology. There is no need to setup ports or DDNS. It will directly connect

to camera.

But there are exceptional cases, e.g. if a bulb camera is set behind a highly controlled firewall, then it is

required to set port forwarding.

TCP Ports : 8080 81 7070 443

UDP Ports : 8080 81 7070 443

15. Advanced Setting for Professional

Administrator can use Internet Browser to control the back-end of bulb camera.

Each bulb camera has a local IP address, On PC software, IP address can be found in “Set IP address”

function, then key in the IP address in a browser, like in IE, 192.168.88.111

If IE is the default web browser, select “Open device IE” on menu. Enter directly.

Then a prompt screen will pop up for login

Login : admin Password : admin

If you are using it for the first time, then you have to click “Download activeX” and install it before

you can login.

If you have downloaded and installed but still cannot login, then go to our support website

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 30 / 36 www.eazzydv.com

www.bulbcam.net and download an activeX and manually install by “Administrator” role (in

Computer).

When login is successful, an administration screen will be shown as below.

Administrator screen on IE :

16. Advanced Setting for Professional – Update Patch

If new firmware is released, we will update it on our website, www.bulbcam.net

For updating patches. Firstly download from above website, then go to back-end administration page

in section 12.

Click “Parameter->Device Maintenance”, the screen will look like this as below

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 31 / 36 www.eazzydv.com

Click “browse” button, locate the firmware update file from your computer, then click “upgrade”
button

When it is upgrading, don’t turn off power of bulb camera. When it is done, it will auto reboot.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 32 / 36 www.eazzydv.com

When the reboot is done (indication light turns to RED color), Then turn off the power, wait for 10
seconds, and turn on again.

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 33 / 36 www.eazzydv.com

17. Accessories

17.1 Extension Adapter

Item No.

Picture

Description

BC-AE16

160mm extension
adapter, bending
angle is around 10°

BC-AE20

200mm extension
adapter, Max. bending
angle is around 90°

BC-AE30

300mm extension
adapter, max. bending
angle is around 180°

BC-AE45

450mm extension
adapter, max. bending
angle is around 360°

17.2 Extension Adapter with Plug

Item No.

Picture

Description

BC-AEP30UK

300mm long
extension adapter
with UK plug

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 34 / 36 www.eazzydv.com

BC-AEPC30UK

300mm long
extension adapter
with UK plug plus clip
and power cable

17.3 Bulb Converter

Item No.

Picture

Description

BC-ACB22

Converting E27 to B22

BC-ACGU10

Converting E27 to
GU10

BC-ACE14

Converting E27 to E14

BC-ACE12

Converting E27 to E12

18. Trouble Shooting

1. When playback video , there is video only without sound

Solution : The problem is that you did not tick the “recording sound” flag in sd-card

configuration.

2. I have entered my router SSID and router’s wifi password and my devices have been

connected to existing network, but I cannot find the bulb camera on network after two

minutes.

Solution : Press “Reboot” button on remote control or by using reset button, set the machine

back to default mode “Factory mode”, and retry again. Beware of small or capital letters when

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 35 / 36 www.eazzydv.com

entering the SSID and password, as they must exactly match. Also, read the router setting

section.

3. Cannot receive email alert.

Solution : First you have to check your email service provider to make sure the information you

are entering is correct, especially the SMTP server where emails are allowed to be sent directly.

4. Where is your technical supporting page ?

Solution : If there are any updates on bulb wifi dvr cameras, we will update it on our website in

the link below:http://www.bulbcam.net

__________________________________________________________________________________________
Eazzy Digital Video Technology Limited 36 / 36 www.eazzydv.com

19. Disclaimer

This camera is for legal surveillance purpose. Our company does not warrant or assume
any legal liability or responsibility for illegal usage or installation.