EAW SM200iH User Manual
SPECIFICATIONS SM200iH
DESCRIPTION
APPLICATION
PERFORMANCE
PHYSICAL
On e Ma in St re et, W hitinsville, M A 01 58 8 50 8 234 615 8 To ll F ree 8 00 992 501 3 FA X 50 8 234 8251 in fo @ea w.c om ww w.e aw. com
EAW products are continually improved. All specications are therefore subject to change without notice. SM200iH Rev (2) April 2007 Printed in USA
A 2-way switchable (passive/bi-amp) full range system in a
vented low prole stage monitor enclosure. Includes a 12-in
woofer and a 2-in exit compression driver on a Wave Guide
Plate™. Powering mode is switchable: passive (LF/HF
crossover) or bi-amplied. Available in mirror-imaged right
and left versions.
The Wave Guide Plate eliminates horn throat distortion for
natural vocal reproduction. Switch allows pasive or biamp
operation. Dual NL4 connectors facilitate “daisy chaining”
multiple monitors. Six year warranty.
Applications include:
Band PA Concert Tours
Corporate Events Large Theaters
Large Houses of Worship Live Music Clubs
Frequency Response (Hz)
±3 db 75 Hz to 18 kHz
-10 dB 63 Hz
Axial Sensitivity (dB SPL, 1 Watt @1m)
Full Range 94
Bi-amped LF 94
Bi-amped HF 101
Impedance (Ohms)
Full Range 4
Bi-amped LF 4
Bi-amped HF 4
Power Handling (Watts, Continuous)
Full Range Passive 500
Bi-amped LF 500
Bi-amped HF 200
Recommended High-Pass Frequency
24 dB/Octave 58 Hz
Calculated Maximum Output (dB SPL @ 1m)
Full Range Peak 127.0
Bi-amped LF Peak 127.0
Bi-amped HF Peak 130.0
Full Range Long Term 121.0
Bi-amped LF Long Term 121.0
Bi-amped HF Long Term 124.0
Nominal Coverage Angle, -6 dB Points (degrees)
Conical 90
LF Subsystem 1x 12-in. vented
HF Subsystem 1x 2-in exit compression driver
on Wave Guide Plate™
Conguration 2-way, full range oor monitor
Powering Switchable: full range (passive
LF/HF crossover) or bi-amplied
Controls (switches, knobs) Powering mode switch
Cabinet Type (shape) Dual angle stage monitor/40° or
15°
Enclosure Materials Baltic birch plywood
Finish Black catalyzed polyurethane
Connectors 2x Neutrik NL4 Speakon
Grille Vinyl coated perforated steel,
foam backed
Dimensions Inches Millimeters
Height (face) 14.7 373.1
Width 22.4 568.3
Depth 9.8 247.7
Minimum Stage Height 10.9 277.6
Floor Angle(s) 40° or 15°
smargoliKsdnuoPsthgieW
Net Weight 58.0 26.4
Shipping Weight 72.0 32.8
SPECIFICATIONS SM200iH
DIMENSIONAL DRAWING A & E SPECIFICATIONS
On e Ma in St re et, W hitinsville, M A 01 58 8 50 8 234 615 8 To ll F ree 8 00 992 501 3 FA X 50 8 234 8251 in fo @ea w.c om ww w.e aw. com
EAW products are continually improved. All specications are therefore subject to change without notice. SM200iH Rev (2) April 2007 Printed in USA
The two-way full range loudspeaker systems shall incorporate
a 12-in LF transducer and a 2-in exit compression driver HF
transducer.
The LF driver shall be mounted in a vented enclosure tuned for
optimum low frequency response. The HF driver shall be
loaded on an axis-symmetrical wave guide plate with a nominal coverage pattern of 90° (conical). An internal passive lter network shall provide fourth order acoustical crossover and
system equalization.
System frequency response shall vary no more than ±3 dB from
75 Hz to 18 kHz measured on axis. In passive mode, the loudspeaker shall produce a Sound Pressure Level (SPL) of 94 dB
SPL on axis at 1 meter with a power input of 1 Watt, and shall
be capable of producing a peak output of 127 SPL on axis at
1 meter. It shall handle 500 Watts of amplier power (continuous) and shall have a nominal impedance of 4 Ohms.
In bi-amped mode, the low frequency section shall meet all
passive mode performance criteria. In addition, the high frequency section in bi-amped mode shall produce a Sound
Pressure Level (SPL) of 101 dB SPL on axis at 1 meter with a
power input of 1 Watt, and shall be capable of producing a
peak output of 130 SPL on axis at 1 meter. The high frequency section in bi-amped mode shall handle 200 Watts of amplier power (continuous) and shall have a nominal impedance
of 4 Ohms.
The loudspeaker enclosure shall be irregularly trapezoidal in
shape and shall have rubber footpads on two sides allowing
its bae to be angled up 40° or 15°. The enclosure shall be
available in mirror-imaged right/left congurations. It shall
be constructed of multi-ply, void-free cross-grain-laminated
Baltic birch plywood and shall employ extensive internal bracing. It shall be nished in black catalyzed polyurethane.
Input connectors shall be dual Neutrik NL4 Speakon. The system shall include a switch allowing it to be operated in biamp or passive powering mode. The front of the loudspeaker
shall be covered with a vinyl coated perforated steel grille
backed with open cell foam to protect against dust.
The two-way full range loudspeaker shall be the EAW model
SM200iH. (Specify left or right.)
Manufacturing tolerances are +/- 0.13 and +/- 1°
510173
10/24/96
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED.
LE
FRONT
4.75
22.50
LEFT SIDE
50°
75°
10.96
2.38
12.59
2.87
6.00
7.00
4.00
RIGHT SIDE
B
A
A
B
4.25
2.31
2.13
1.56
6.38
4.11
2.12
2.27
TOP
BOTTOM
7.25
6.12
1.56
VIEW A-A
1.25
19.37
VIEW B-B
1.25
6.04
1.56 19.37
Loading...