EAW SM109z User Manual

SPECIFICATIONS SM109z
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com EAW products are continually improved. All specifications are therefore subject to change without notice. SM109z/0004644/001/2 pp September 2002 Printed in USA
Part Number 0001307 Configuration 2-way, full-range floor monitor LF Subsystem 1x 10-in, vented
HF Subsystem 1-in exit/1.4-in voice coil
compression driver on Wave Guide Plate™
Powering Mode Passive LF/HF crossover
Enclosure Materials
Exterior grade Baltic birch plywood
Finish
Wear resistant textured black paint
Connectors 2x Neutrik NL4 Speakon
Mounting Hardware Pole mount cup
Grille Powder coated perforated steel
Dimensions inches millimeters
Height 14.88 378
Height w/feet 15.5 394
Width 12.25 311
Depth 18.00 457
Floor Angle 37°
Weights pounds kilograms
Net Weight 30 13.7
Shipping Weight 33 15.0
Frequency Response (1 W @ 1m)
±3 dB 100 Hz to 19 kHz
-10 dB 80 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
Full Range 95
Impedance (Ohms)
Full Range 8
Power Handling (Watts)
Full Range 300
Recommended High-Pass Frequency
(24 dB/octave) 70 Hz
Calculated Maximum Output (dB SPL)
Full Range Peak 126
Full Range Long Term 120
Nominal Coverage Angle / -6 dB points (degrees)
Conical 100
PHYSICAL
FEATURES
DESCRIPTION
APPLICATION
PERFORMANCE
• Compact 2-way, 10-in stage monitor/PA
• Dual purpose loudspeaker: stage monitor and PA
• Rubber feet included for floor use plus a pole mount cup for stand mounting
• Passive crossover and EQ for economical single amplifier operation
• Dual Neutrik NL4 connectors for input and loop through connection
• Integral handle strategically placed for easy transport
The SM109z is a compact, professi onal lou dspeak er configur ed for dual-purpose stage monitor and PA use. It is designed for applications with limited space requiring high quality moni­toring. The enclosur e is fitted with a pole cup f or upri gh t use, increasing the SM109z’s usefulness as a main PA loudspeaker. The conical HF waveguide provides wide-angle projection, important in smaller venues where a single monitor must often cover several perform ers . As a PA loudspeak er, this sam e pattern is ideal for meetings and presentations. Portable usage is enhanced by the heavy-duty enclosure construction, steel grille, and in tegral handle . T wo N eutrik NL4 jacks provid e reliable input and loop through connections. The SM109z car­ries a six year warranty.
Applications Include:
• Houses of worship • Club Bands
• TV studios • Theatres
• Meeting rooms • Classrooms
SPECIFICATIONS SM109z
DIMENSIONAL DRAWING
INPUT
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com EAW products are continually improved. All specifications are therefore subject to change without notice. SM109z/0004644/001/2 pp September 2002 Printed in USA
Manufacturing tolerances are +/- 0.13 and +/- 1°
The 2-way full-range loudspeaker system shall incorporate a 10-in LF transducer and a 1.4-in voice coil compression driver.
The LF transducer shall be mounted in a vented enclosure tuned for optimum low frequency response. The HF transducer shall be loaded on a axis-symmetrical, 1-in exit Wave Guide Plate™ with a nominal conical beam wid th of 100°. An in ternal passive filter ne t­work shall provide all acousti cal crossover and system equ alization requirements.
System frequency response shall vary no more than ±3 dB from 100 Hz to 19 kHz measured on axis. Th e loudspeak er shall pr odu ce a sound pressure level (SPL) of 95 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of pr oducing a peak output of 126 dB SPL on axis at 1 meter. The loudspeaker shall handle 300 watts of amplifier power (continuous) and shall have a nominal impedance of 8 ohms.
The loudspeaker en closure shall be irr egularly tr apezoid al in shape and shall have rubber footpads on one side. Its baffle shall be angled up 37°. It shall be constructed of exterior grade Baltic birch plywood and shall employ exten sive internal br acing. I t shall be finished in wear-resistant textured black paint. Input connec­tors shall be 2x Neutrik NL4 Speakon wired in parallel. It shall include a pole mount cup and handle integral to the enclosure. The front of the loudspeaker shall be covered with powder coated perforated steel grille.
The 2-way full-rang e loudspeaker shall be the EAW model SM109z.
0001243(A) 9/12/02
L
A
C
C
C
L
6.44C
L
3.75
9.25
12.25
RIGHT SIDE
LEFT SIDE
HANDLE
10.53
7.43
1.32
A
2X 9.64
2X INPUT CONNECTOR
GRILLE PARTIALLY SHOWN
2X 4.00 T.S.C
NOTES:
1. SYMBOL INDICATES FEET.
2. SYMBOL INDICATES CENTER OF
BALANCE.
3. WEIGHT APPROX. 27 LBS.
4. SHIPPING WEIGHT APPROX. 32 LBS.
5. HEIGHT OF FEET APPROX. .4"
L
2X 7.56
1.734.31
R 3.44
19.75
2X 20.15
3.94
TOP HAT
VIEW A-A
9.25
WHITINSVILLE, MA USA
SM109z
S/N
PIN 1--...-- PIN 1+...+
NEUTRIK
NEUTRIK
NL 4 MPR
Loading...