EAW SB825P Specifications
SB800P Series
Dual Driver Subwoofers
SB825P & SB828P
► Premium dual or single voice coil
transducers with ultra linear suspension
behavior for exceptional impulse response
► Innovative ultra-low turbulence port
► Can be ground stacked or permanently
suspended with 16 x M10 points
► Flexible mounting, weather protection
& color options
OVERVIEW
The EAW engineering team has pushed the legendary SB
series to new levels with the introduction of SB825 and
SB828.
SB800 is designed around a low turbulence port based
in uid dynamic research married with groundbreaking
transducer design. Innovative ultra-linear suspension
behavior and symmetric ux density provide exceptional
impulse response and output.
Compact height and depth allow for the subwoofers
to be deployed in many room types, and congurable
sound-isolating feet allow for either horizontal or vertical
installation. Sixteen M10 mounting points allow for a
myriad of permanent suspension options.
Compact height &
depth for wicked
exible install
SB828P
TECHNICAL SPECIFICATIONS
PERFORMANCE SB828P SB825P
1
Max SPL
Operating Range
Nominal Beamwidth
Power Handling 4000W 3000W
Nominal Impedance 4 ohms 4 ohms
CONFIGURATION SB828P SB825P
Subsystem
LF Transducer, Loading
Operating Mode
Single-amp
PHYSICAL SB828P SB825P
Physical Rigging 16 x M10 Mounting Points
Dimensions (H × W × D)
Net Weight*
Shipping Weight*
Connector Type Terminal strip & loop thru NL4
1 Calculated max SPL at 1m with 4:1 (12dB) crest factor pink noise. Specied as whole
space (free eld) for full range loudspeakers, half space for subwoofers.
2 Operating Range: Range where the processed Frequency Response stays within -10
dB SPL of the power averaged SPL within this range; measured on the geometric axis.
Narrow band dips are excepted.
3 Nominal Beamwidth: Design angle for the -6 dB SPL points, referenced to 0 dB SPL as
the highest level.
2
3
143 dB 138 dB
25-130 Hz 27-135 Hz
Horizontal 360° Vertical 360°
2x 18in Cone, 4.5in
Tetracoil Dual Voice
Coil, Vented
Amplier Channels 1
External Signal Processing EAW DSP
21 x 52.5 x 30in
(533 x 1334 x
762mm)
200lbs
(90.7kg)
215 lbs
(97.5kg)
2x 15in Cone, 4.5in
Voice Coil, Vented
17 x 42 x 24in
(432 x 1067 x
610mm)
140 lbs
(63.5kg)
155 lbs
(70.3kg)
Swappable feet
Integrated handles
for maneuverability
during install or
production
for horizontal
or vertical
conguration
SB825P
M10 mounting
points on all sides
One Main Street | Whitinsville, MA 01588 | Tel 800 992 5013 / 508 234 6158 | www.eaw.com
EAW products are continually improved. All specications are therefore subject to change without notice. ©2019 Eastern Acoustics Works
1911_SB800P_Spec
Loading...