EAW SB150zP User Manual

Eastern Acoustic Works One Main S treet Whitinsville, MA01588 tel [phone] fax [phone] www.eaw .com

EAW products are continually improved. All specifications are therefore subject to change without notice. Part Number: RD0308 (A) SB150zP April 2005

SB150zP Specifications group · I

DESCRIPTION

The SB products are EAW's premium subwoofers designed for
the most demanding professional applications. Abroad range of
capabilities and sizes provide the designer with selections that
can be specifically matched to their application. Top quality
drivers, engineered by EAW , provide the highest output and best
sonic performance possible for a given form factor. All SB
models are direct radiating, with optimally tuned, vented
enclosures. SB subwoofers are the choice where the best sonic
performance, highest reliability, and most robust physical
construction are required.

The SB150zPis a high output, compact subwoofer system. This
versatile, all-purpose subwoofer is designed for permanent
installation where the solid-sounding output of a 15 inch driver is
desired. The SB150zP works well with most full-range
loudspeakers in a variety of applications including: small houses
of worship, A/V systems, hotel ballrooms, meeting rooms,
classrooms, exhibit areas, f/x reinforcement, cruise ships,
cinemas, TV studios, restaurants, and small retail sp aces.

The SB150zPis designed to be used with today's sophisticated
digital signal processing to optimize the LF response. EAW's MX
Series processors are recommended for the required crossover
and equalization.

Six Y ear Warranty .

15 INCH SUBWOOFER

See TABULARDA T Anotes for details, half space = floor-mounted

CONFIGURA TION

Subsystem

Transducer Loading

SUB 1x 15 in cone Vented

Operating Mode

Amplifier Channels External Signal Processing

Single-amp LF DSPw/1-way filter

PERFORMANCE

1

Operating Range 34 Hz to 145 Hz
Nominal Beamwidth

Horz 360°

Vert 360°

Axial Sensitivity (SPL)

LF (whole space) 94 dB 34 Hz to 145 Hz

(half space) 100 dB 34 Hz to 145 Hz

Input Impedance (ohms)

Nominal Minimum

LF 8 6.9 @ 40 Hz

High Pass Filter

High Pass =>30 Hz, 12 dB/octave Butterworth

Accelerated Life Test

2

LF 65 V 525 W @ 8 ohm

Transducer (AES) 700 W

Calculated Axial Output Limit (SPL)

Average Peak

LF (whole space) 121 dB 127 dB

(half space) 127 dB 133 dB

ORDERING DA T A

Description Part Number

SB150zP15 inch Subwoofer Black 0008960
SB150zP15 inch Subwoofer White 0012192
SB150zP15 inch Subwoofer Black WP 0009038

Optional Accessories

3/8-16 Forged Shoulder Eyebolt 104001

1 T o achieve specified performance, the listed external signal processing with EAW-provided settings is required.
2 For recommendations to select power amplifier size refer to : “HOW MUCH AMPLIFIER POWER DO I NEED?” on the EAW web site.

Eastern Acoustic Works One Main S treet Whitinsville, MA01588 tel [phone] fax [phone] www.eaw .com

EAW products are continually improved. All specifications are therefore subject to change without notice. Part Number: RD0308 (A) SB150zP April 2005

SB150zP Specifications group · I

ENCLOSURE

Material Baltic birch plywood

Finish Wear resistant textured black paint

Grille Vinyl-coated perforated steel

NOTES: This drawing has been reduced. Do not scale.
For WPversion, add 0.25 in / 6.4 mm to the outside dimensions = 0.125 in / 3.2 mm all around.

NOTES:

1. SYMBOL INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (PI ANGLE).

2. SYMBOL INDICATES CENTER OF BALLANCE.

3. WEIGHT APPROX. 72.00 lb [32.6 kg]

4. SHIPPING WEIGHT APPROX. 80.00 lb [36.3 kg]

C

L

19.00

[482.6]

8.25

[209.6]

12.50

[317.5]

24.62

[625.5]

16.00

[406.4]

TOP/BOTTOM

19.68

[499.9]

GRILLE PARTIALLY SHOWN

FRONT

3.25

[82.6]

3.25

[82.6]

20.68

[525.3]

C

L

RIGHT SIDE

DIMENSIONS APPLY

TO BOTH SIDES

SB150zP

12.50

[317.5]

12.00

[304.8]

INPUT

5.00

[127.0]

7.36

[187.1]

C

L

WHITINSVILLE,MA USA

S/N

BACK

4.00

[101.6]

PRODUCTION

EASTERN ACOUSTIC W ORKS