EAW SB1002 User Manual

S B 1 0 0 2 S p e c i f i c a t i o n s group · S

DUAL 18 INCH SUBWOOFER

See NOTES TABULAR DATA for details

CONFIGURATION

Subsystem

Transducer Loading

SUB 2x 18 in cone Vented

Operating Mode

Amplifier Channels External Signal Processing

Single-amp LF1/ LF2 DSP w/1-way filter
Dual-amp LF1, LF2 DSP w/1-way filter

PERFORMANCE

Operating Range 28 Hz to 160 Hz
Nominal Beamwidth

Horz 360°
Vert 360°
Axial Sensitivity (SPL)

LF1/LF2 (whole space) 95 dB 28 Hz to 160 Hz

(half space) 101 dB 28 Hz to 160 Hz

Input Impedance (ohms)

Nominal Minimum

LF1/ LF2 4 3.8 @ 30 Hz

LF1, LF2 8 (each) 7.5 @ 30 Hz (each)

High Pass Filter

DESCRIPTION

EAW SB subwoofers are premium products designed for the most
demanding professional applications. A broad range of capabilities
and sizes provide designers with selections that can be specifically
matched to the application. Top quality drivers, engineered by EAW,
supply the highest output and best sonic performance possible for a
given form factor. All SB models are direct radiating, with optimally
tuned, vented enclosures. SB subwoofers are the choice where
the absolute best sonic performance, highest reliability, and most
robust physical construction are required.

The SB1002 is a large-format, high-output subwoofer system
that can be ground-stacked or easily flown via an integral rigging
system, making it ideal for a wide range of live and installed sound
applications. It offers the fatter-sounding output of dual 18-inch cone
drivers, with the mounting of these drivers maximizing cone area
and minimizing front area, providing the acoustical performance
and physical configuration well suited for creating large subwoofer
arrays. The drivers are designed specifically for the SB1002, offering
very large (4.5-inch) voice coils as well as powerful neodymium
magnet structures that also reduce weight.

The SB1002 is designed to be used with sophisticated digital signal
processing to optimize the LF response. EAW UX and MX Series
processors are recommended for the required crossover and
equalization.

The rigging system, similar to that of EAW’s popular KF760 Series
line arrays, features a fast, easy-to-use two-point approach that
accommodates flown arrays of up to 12 SB1002 units. A handle
on the rear upper corner of the SB1002 enclosure provides added
guidance and convenient “push-pull” ability in the flying process.

Applications include large live music and dance clubs, houses
of worship, performing arts/auditoriums, corporate events, and
concert touring.

Six Year Warranty.

High Pass =>30 Hz, 12 dB/octave

Accelerated Life Test

System LF1/LF2 98 V 2400 W @ 4 ohm
LF1, LF2 98 V (each) 1200 W @ 8 ohm (each)
Transducer (AES) 1200 W (each)

Calculated Axial Output Limit (whole space SPL)

Average Peak

LF1/LF2 (whole space) 129 dB 135 dB
(half space) 135 dB 141 dB

ORDERING DATA

Description Part Number

SB1002 Dual 18 inch Subwoofer Black 0023835
Optional Accessories
FB1SB Subwoofer Fly Bar 0023840
PLT1K2 Caster Pallet 0023841

Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel [phone] fax [phone] www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice. Part Number: RD0442 SB1002 November 2007

S B 1 0 0 2 S p e c i f i c a t i o n s group · S

ENCLOSURE

Material Baltic birch plywood
Finish RoadCoatTM wear resistant textured black paint
Grille Powder-coated perforated steel

NOTES: This drawing has been reduced. Do not scale.

Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel [phone] fax [phone] www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice. Part Number: RD0442 SB1002 November 2007