EAW RSX208L Specifications

Download

RSX208L Specications

Features

• OptiLogic™ provides array self-detection via onboard infrared sensors

and accelerometers for near-instant optimization that cuts down on setup and tuning time.

• Extremely approachable EAWmosaic™ iOS app delivers system

prediction, control and monitoring from any location in the venue.

• Proven EAW acoustical design and DSP including Focusing™ and

DynO™ provides a pristine impulse response at all output levels.

• Integrated Dante™ networking (with loop-thru) on all models

including Analog redundancy capability.

Applications

• House of Worship

• Theatres, Auditoria and Performing Arts Centers

• Live Music Clubs

• Corporate AV Houses

• Live Production/Regional Rental Houses

• Dry Hire

Description

Designed to streamline setup and deliver maximum results in minimum time, RADIUS couples unique and intelligent features with EAW’s signature acoustical design to deliver solutions for rental rms and system integrators. The RADIUS articulated array features OptiLogic, providing automatic array self-detection and instant optimization including air loss compensation and more. EAWmosaic™ app provides total system optimization from anywhere in the venue, plus intuitive room design and prediction in a single, comprehensive application. With the proven sonic performance of EAW’s acoustic design and DSP mastery plus full Dante integration across the line, RADIUS delivers an intelligent and exible system to t any budget.

3-WAY SELF-POWERED LOUDSPEAKER 120° × 12°

Configuration

Subsystem Transducer Loading

LF 1 x 8 in cone, 2 in voice coil Vented LF/MF 1 x 8 in cone, 2 in voice coil Vented HF 2 x 1 in exit, 1.4 in voice coil Horn-loaded

compression drivers

Operating Mode Amplier Channels Signal Processing

Tri-amp LF, LF/MF, HF DSP w/EAW Focusing™ and DynO™

Acoustical Performance

Operating Range

70 Hz to 18 kHz

Nominal Beamwidth

Horizontal 120° Vertical 12°

Calculated Axial Output Limit (whole space SPL) Average Peak

LF/MF/HF 122 dB 128 dB

Electrical Performance

Input

Type Electronically balanced Max Input Level 21dBu Impedance 20 kOhm (balanced) Wiring XLRF, Pin 1 chassis, pin 2 +, pin 3 Separate loop-thru XLRM (for analog signal only)

Input Selection Analog, Dante

Ampliers & Processing LF/MF/HF

Type Modified Class D Maximum Output 3x 500W Driver Protection Integral DSP limiting AC Mains (nominal) Connector Neutrik PowerCon® Input 100 V to 240 V Frequency 50 Hz to 60 Hz Power Consumption Idle 26 W Peak Draw 250 W

Controls/Communication

Connections 2x Neutrik® etherCON™, RJ-45 Protocols Ethernet/Dante Software EAWmosaic™ (available on the App Store) Indicators LCD Screen on amplifier panel for UI,

Logo LED (User-definable behavior) User Controls Push-button Rotary Encoder

Weight 40.5 lbs/18.4 kg Dimensions 9.8x27x13 in / 249x683x332 mm

Ordering Data

Description Part Number

EAW RSX208L BLACK 2047570-90

Optional Accessories

EAW FBX100 FLYBAR BLACK 2047169-00 EAW ACC WEATHER SHIELD HORZ BLK 2047681 EAW SBX100 STAND MOUNT BLACK 2047369 EAW ACC ROADCASE RSX208L 2047368

AUG2016Part Number: RD0961 Rev A01EAW products are continually improved. All specications are therefore subject to change without notice.

RSX208L Specications

2047573-CD-A_DWG_CSTMER_RSX208L

GRILLE NOT SHOWN FOR CLARITY

DIMENSIONS APPLY TO

Enclosure

Material

Exterior-grade hardwood plywood Weather-resistant textured RoadCoat™

Finish

Pre-treated, powder-coated perforated steel

Grille

NOTE: This drawing has been reduced. Do not scale.

DATECHANGE NUMBERREV

6/28/16ECOWH11312A

NOTES:

1. SYMBOL INDICATES CENTER OF

BALANCE.

2. WEIGHT APPROX. 40.5 lb [18.4 kg].

3. SHIPPING WEIGHT APPROX. 45 lb [20.4 kg].

13.10

[332.7]

6.75

[171.5]

AMPLIFIER

RSX208L

TSC

7.20

[182.8]

6.25 [158.8]

RETRACTABLE

RIGGING SYSTEM

4X PROPRIETARY

BACK

3.50

[88.9]

TSC

HANDLE

TO BOTH SIDES

RIGHT SIDE

DIMENSIONS APPLY

REVISION:

0.100

SCALE:

www.eaw.com

TITLE:

1 1

SHEET OF

DWG CUSTOMER EAW RSX208L

2047573-CD

DRAWING NUMBER:

PRO ENGINEER

ANGLES ± 1°

FOR REF ONLY

(X.XX) = REF DIMS

TOLERANCE IN INCHES

DUAL [MM] DIMENSIONS

LINEAR ± 0.13 in / ± 3.3 mm

ALL DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED:

THIRD ANGLE PROJECTION

TO BE SYMMETRICAL

NO TOLERANCE IMPLIED

HEREIN IS PROPRIETARY AND

THE INFORMATION CONTAINED

3 4

DIMENSIONS ACROSS CENTERLINES

TSC = THEORETICAL SHARP CORNER

LOUD TECHNOLOGIES, INC.

CONFIDENTIAL PROPERTY OF

12.38

[314.5]

TOP

25.20 [640.0]

TOP AND BOTTOM

26.89 [683.0]

9.80

[248.9]

FRONT

AUG2016Part Number: RD0961 Rev A01EAW products are continually improved. All specications are therefore subject to change without notice.

RSX208L Specications

10 100 1000 20000

Performance Data

See NOTES GRAPHIC DATA for details

Frequency Response: Processed

LF = green, MF = orange, HF = black, Complete = blue

-10

-20

SPL (dB)

-30

-40

-50

Frequency (Hz)

Phase Linearity

Complete = blue

180

Frequency Response: Voicings

Sapphire = green, White = orange, Grey = black, Blue = blue

-10

-20

SPL (dB)

-30

-40

-50

Frequency (Hz)

Beamwidth

Horizontal = orange Vertical = black

360

100

-0

Degrees

-90

-180 10 100 1000 20000

Frequency (Hz)

Degrees

100 1000 20000

Frequency (Hz)

AUG2016Part Number: RD0961 Rev A01EAW products are continually improved. All specications are therefore subject to change without notice.

RSX208L Specications

Horizontal Polar Data

See NOTES GRAPHIC DATA for details

180˚

135˚

-135˚

135˚

90˚

-90˚

90˚

45˚

-45˚

45˚

90˚

135˚

100Hz

0˚

125Hz

160Hz

200Hz

250Hz

315Hz

400Hz

500Hz

180˚

-135˚

-90˚

90˚

135˚

180˚

45˚

-45˚

45˚

1600Hz

0˚

2000Hz

2500Hz

3150Hz

4000Hz

5000Hz

6300Hz

8000Hz

180˚

-135˚

135˚

-135˚

-90˚

90˚

-90˚

-45˚

45˚

-45˚

-135˚

-90˚

90˚

135˚

630Hz

0˚

800Hz

1000Hz

1250Hz

180˚

-135˚

-90˚

-45˚

45˚

-45˚

10000Hz

0˚

12500Hz

16000Hz

AUG2016Part Number: RD0961 Rev A01EAW products are continually improved. All specications are therefore subject to change without notice.

RSX208L Specications

Vertical Polar Data

See NOTES GRAPHIC DATA for details

180˚

135˚

-135˚

135˚

90˚

-90˚

90˚

45˚

-45˚

45˚

90˚

135˚

100Hz

0˚

125Hz

160Hz

200Hz

250Hz

315Hz

400Hz

500Hz

180˚

-135˚

-90˚

90˚

135˚

180˚

45˚

-45˚

45˚

1600Hz

0˚

2000Hz

2500Hz

3150Hz

4000Hz

5000Hz

6300Hz

8000Hz

180˚

-135˚

135˚

-135˚

-90˚

90˚

-90˚

-45˚

45˚

-45˚

-135˚

-90˚

90˚

135˚

630Hz

0˚

800Hz

1000Hz

1250Hz

180˚

-135˚

-90˚

-45˚

45˚

-45˚

10000Hz

0˚

12500Hz

16000Hz

AUG2016Part Number: RD0961 Rev A01EAW products are continually improved. All specications are therefore subject to change without notice.

RSX208L Specications

Input Panel Signal Diagram

ADC

Dante

Receiver

Legend

HPF High Pass Filter for crossover –or– Recommended High Pass Filter LPF Low Pass Filter for crossover LF/MF/HF Low Frequency / Mid Frequency / High Frequency AMP User Supplied Power Amplier –or– Integral Amplier for NT products XVR Passive LPFs, HPFs, and EQ integral to the loudspeaker EAW Focusing Digital Signal Processor capable of implementing EAW Focusing EAW DynO Digital Signal Processor capable of implementing EAW DynO processing

Input Type

Select

EAW Focusing

+ DynO

EAW Focusing

+ DynO

EAW Focusing

+ DynO

Delay

OptiLogic

PEQ

HPF/LPF

Gain &

Polarity

Power

DACOptiLogic

Amp

Power

DAC

Amp

Power

DAC

Amp

Mute

User-accessible

Parameters

MF/LF

Notes

TABULAR DATA

1. Measurement/Data Processing Systems: Primary – FChart: proprietary EAW software; Secondary – Brüel & Kjær 2012.

2. Microphone Systems: Earthworks M30; Brüel & Kjær 4133

3. Measurements: Dual channel FFT; length: 32 768 samples; sample rate: 48 kHz; logarithmic sine wave sweep.

4. Measurement System Qualication (includes all uncertainties): SPL: accuracy +/-0.2 dB @ 1 kHz, precision +/-0.5 dB 20 Hz to 20 kHz, resolution 0.05 dB; Frequency: accuracy +/-1 %, precision +/-0.1 Hz, resolution the larger of 1.5 Hz or 1/48 octave; Time: accuracy +/-10.4 μs, precision +/-0.5 μs, resolution 10.4 μs; Angular: accuracy +/-1°, precision +/-0.5°, resolution 0.5°.

5. Environment: Measurements time-windowed and processed to eliminate room eects, approximating an anechoic environment. Data processed as anechoic or fractional space, as noted.

6. Measurement Distance: 7.46 m. Acoustic responses represent complex summation of the subsystems at 20 m. SPL is referenced to other distances using the Inverse Square Law.

7. Enclosure Orientation: For beamwidth and polar specications, as shown in Mechanical Specication drawing.

8. Volts: Measured rms value of the test signal.

9. Watts: Per audio industry practice, “loudspeaker watts” are calculated as voltage squared divided by rated nominal impedance. Thus, these are not True Watt units of energy as dened by International Standard.

10. SPL: (Sound Pressure Level) Equivalent to the average level of a signal referenced to 0 dB SPL = 20 microPascals.

11. Subsystem: This lists the transducer(s) and their acoustic loading for each passband. Sub = Subwoofer, LF = Low Frequency, MF = Mid Frequency, HF = High Frequency.

12. Operating Mode: User selectable congurations. Between system elements, a comma (,) = separate amplier channels; a slash (/) = single amplier channel. DSP = Digital Signal Processor. IMPORTANT: To achieve the specied performance, the listed external signal processing must be used with EAW-provided settings.

13. Operating Range: Range where the processed Frequency Response stays within -10 dB SPL of the power averaged SPL within this range; measured on the geometric axis. Narrow band dips are excepted.

14. Nominal Beamwidth: Design angle for the -6 dB SPL points, referenced to 0 dB SPL as the highest level.

15. Axial Sensitivity: Power averaged SPL over the Operating Range with an input voltage that would produce 1 W at the nominal impedance; measured with no external processing on the geometric axis, referenced to 1 m.

16. Nominal Impedance: Selected 4, 8, or 16 ohm resistance such that the minimum impedance point is no more than 20% below this resistance over the Operating Range.

17. Accelerated Life Test: Maximum test input voltage applied with an EIA-426B dened spectrum; measured with recommended signal processing and Recommended Protection Filter.

18. Calculated Axial Output Limit: Highest average and peak SPLs possible during the Accelerated Life Test. The Peak SPL represents the 2:1 (6 dB) crest factor of the Life Test signal.

19. High Pass Filter: This helps protect the loudspeaker from excessive input signal levels at frequencies below the Operating Range.

GRAPHIC DATA

1. Resolution: To remove insignicant ne details, 1/12 octave cepstral smoothing was applied to acoustic frequency responses and 1/3 octave cepstral smoothing was applied to the beamwidth and impedance data. Other graphs are plotted using raw data.

2. Frequency Responses: Variation in acoustic output level with frequency for a constant input signal. Processed: normalized to 0 dB SPL. Unprocessed inputs: 2 V (4 ohm nominal impedance), 2.83 V (8 ohm nominal impedance), or 4 V (16 ohm nominal impedance) referenced to a distance of 1 m.

3. Processor Response: The variation in output level with frequency for a constant input signal of 0.775 V = 0 dB reference.

4. Beamwidth: Average angle for each 1/3 octave frequency band where, starting from the rear of the loudspeaker, the output rst reaches -6 dB SPL referenced to 0 dB SPL as the highest level. This method means the output may drop below -6 dB SPL within the beamwidth angle.

5. Impedance: Variation in impedance magnitude, in ohms, with frequency without regard to voltage/current phase. This means the impedance values may not be used to calculate True Watts (see 9 above).

6. Polar Data: Horizontal and vertical polar responses for each 1/3 octave frequency band 100 Hz to 16 kHz or Operating Range.

AUG2016Part Number: RD0961 Rev A01EAW products are continually improved. All specications are therefore subject to change without notice.

EAW RSX208L Specifications

Specifications and Main Features

Frequently Asked Questions

User Manual