EAW RSX18 Specifications

PRELIMINARY

RSX18 Specications

Features

• Push-button cardioid operation provides directivity to lower excess

low-frequency energy on stage.

• Extremely approachable EAWmosaic™ iOS app delivers system

prediction, control and monitoring from any location in the venue.

• Proven EAW acoustical design and DSP including Focusing™ and

DynO™ provides a pristine impulse response at all output levels.

• Integrated Dante™ networking (with loop-thru) on all models

including Analog redundancy capability.

Applications

• House of Worship

• Theatres, Auditoria and Performing Arts Centers

• Live Music Clubs

• Corporate AV Houses

• Live Production/Regional Rental Houses

• Dry Hire

Description

Designed to streamline setup and deliver maximum results in minimum time, RADIUS couples unique and intelligent features with EAW’s signature acoustical design to deliver solutions for rental rms and system integrators. The powerful RSX18 18” subwoofer is ideal for production applications, oering push-button cardioid operation for added sonic control. The RSX18 features onboard electronics (1000W per channel) and ultra-wide ports that drastically reduce low-frequency turbulence. EAWmosaic™ app provides total system optimization from anywhere in the venue, plus intuitive room design and prediction in a single, comprehensive application. With the proven sonic performance of EAW’s acoustic design and DSP mastery plus full Dante integration across the line, RADIUS delivers an intelligent and exible system to t any budget.

18 INCH SELF-POWERED SUBWOOFER

Configuration

Subsystem Transducer Loading

LF 1 x 18 in cone, 3 in voice coil Vented

Operating Mode Amplier Channels Signal Processing

Single-amp LF DSP w/ Dyn0™

Performance

Operating Range

30 Hz to 140 Hz

Nominal Beamwidth

Horizontal 360° Vertical 360°

Calculated Axial Output Limit (whole space SPL) Average Peak

(whole space) 120 dB 126 dB (half space) 126 dB 132 dB

Electrical Performance

Input

Type Electronically balanced Max Input Level 21dBu Impedance 20 kOhm (balanced) Wiring XLRF, Pin 1 chassis, pin 2 +, pin 3 Separate loop-thru XLRM (for analog signal only)

Input Selection Analog, Dante

Ampliers & Processing LF

Type Modified Class D Maximum Output 1000W Driver Protection Integral DSP limiting

AC Mains (nominal) Connector Neutrik PowerCon® Input 100 V to 240 V Frequency 50 Hz to 60 Hz Power Consumption Idle 50 W Peak Draw 1400 W

Controls/Communication

Connections 2x Neutrik® etherCON™, RJ-45 Protocols Ethernet/Dante Software EAWmosaic™ (available on the App Store) Indicators LCD Screen on amplifier panel for UI,

Logo LED (User-definable behavior) User Controls Push-button Rotary Encoder

Weight 93.6 lbs/42.5 kg Dimensions 20.25x36x31 in / 514x919x790 mm

Ordering Data

Description Part Number

EAW RSX18 BLACK 2047597-90

Optional Accessories

EAW ACC WEATHER SHIELD HOR BLK 2047681 EAW CASTER PALLET RSX18 2046839 EAW M10X37mm FORGED SHOULDER EYEBOLT KIT 0028272

JUN2016Part Number: RD0963 Rev 100EAW products are continually improved. All specications are therefore subject to change without notice.