EAW RL-15 Datasheet

PRELIMINARY

RL15 Specications

Features

• Custom-designed transducers and porting, signature EAW Focusing™

and DynO™ dynamic optimization processing

• 1,250 watts of bi-amplied Class-D Power Factor Corrected

amplication

• Symmetrical monitor angles with swappable rear panels to form

mirror-image pairs

• Three pre-tuned gig-ready voicings, LED mute function,

PowerCon inlet and loop connectors

• Integral wooden handles, rugged grille and RoadCoat™ enclosure,

hyper-black front EAW logo

• 35mm/1-3/8” pole cup and M8 rigging points

Applications

Concerts, Corporate AV, Portable, Live Clubs, Concert Halls, Theaters,
Auditoriums, Houses of Worship

Description

From corporate events to festivals, every aspect of Redline has been
targeted at making life easier for the live sound professional. From
transducers and electronics to enclosure design and tments, Redline is
built to live in the working world of demanding clients, tight schedules
and even tighter budgets.

The RL15 includes a complete on-board 1,250-watt bi-amplied
electronics package mated to highly-customized precision transducers
engineered to meet the specic demands of the Redline family. Redline
features renowned EAW Focusing™ processing to deliver a pristine
impulse response, while DynO™ algorithms optimize the power transfer
from ampliers to transducers to audience to optimize headroom and
integrity of sound at maximum output.

The RL15 oers perfectly consistent directivity via a Beamwidth-Matched
Crossover on 90x60° user-rotatable horn and painstakingly-engineered
ports that provide huge bass support with no turbulence. Three simple
pre-dened voicings help the user to set up in minutes, and a rear-panel
LED mute keeps Redline invisible in aesthetically-sensitive situations.

The RL15 enclosure incorporates symmetrical monitor angles to form left­right wedge pairs, integral road glove-ready wood handles and sleek but
strong sculpted grilles on RoadCoat™ enclosures.

Six year warranty on enclosure. Two year warranty on electronics.

2-WAY SELF-POWERED LOUDSPEAKER 90° x 60°

See NOTES TABULAR DATA for details

CONFIGURATION

Subsystem
Transducer Loading

LF 1x 15 in cone Vented
HF 1x 1 in exit, 1.75 in voice coil Horn-loaded

compression driver

Operating Mode

Amplier Channels Signal Processing

Bi-amp LF, HF DSP w/EAW Focusing™
and Dyno™

ACOUSTICAL PERFORMANCE

Operating Range

50 Hz to 19 kHz
Nominal Beamwidth (rotatable)

Horiz 90° Vert 60°

Axial Output Limit (whole space SPL)

Average Peak

Calculated LF/HF 129 dB 135 dB

ELECTRICAL PERFORMANCE

Input

Type Electronically balanced XLRF

Loop
Type Electronically balanced XLRM

Amplier

LF HF

Type Class D Class D
Maximum Output 1000 W @ 8 ohm 250 W @ 8 ohm
Driver Protection Integral DSP limiting Integral DSP limiting

AC Mains (nominal)
Connector Neutrik PowerCon®
Input 100 V to 240 V
Frequency 50 Hz to 60 Hz

Indicators (LED)
Amplifier Status Green (Normal), Red (Fault)
Signal Present Green
Limiter Active Yellow
Clip Red
Voicing Mode 3 x Yellow

ORDERING DATA

Description Part Number

EAW RL15 TWO-WAY SELF-POWERED LOUDSPEAKER 2045302-90

Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel [phone] | fax [phone] | www.eaw.com

APRIL2015Part Number: RD0885 Rev 100EAW products are continually improved. All specications are therefore subject to change without notice.

PRELIMINARY

RL15 Specications

2045303-CD-1_DWG_CUST_RDLN_15

NOTES:

1. SYMBOL INDICATES CENTER OF BALANCE [TBD]

2. SYMBOL INDICATES M8 MOUNTING POINT.

3. WEIGHT APPROX. [TBD]

4. SHIPPING WEIGHT APPROX. [TBD]

Enclosure

Material

Exterior-grade hardwood plywood

Finish

Weather-resistant textured RoadCoat™

Grille

Pre-treated, powder-coated perforated steel

NOTE: This drawing has been reduced. Do not scale.

6

DESCRIPTIONREV

NEW ISSUE PER ECOWH10569

JMF 3/31/15

1

5

4

D

C

B

2.61

[66.2]

A

EASTERN ACOUSTIC WORKS

ONE MAIN STREET

WHITINSVILLE, MA 01588 USA

REDLINE15

REVISION:

0.090

SCALE:

1 1

SHEET OF

PRO ENGINEER

6

2045303-CD 1

B

DWG ASSY FINAL ROADCOAT

6.75

[171.3]

TITLE:

BACK

IN EITHER POSITION

TECHNOLOGIES'

REVISION CONTROL

PRODUCT LIFECYCLE

AMP CAN BE INSTALLED

FOR THIS DOCUMENT

IS MAINTAINED IN LOUD

ALL DIMENSIONS ARE IN INCHES

UNLESS OTHERWISE SPECIFIED:

VIEW A-A

THIRD ANGLE PROJECTION

FOR REF ONLY

DUAL [MM] DIMENSIONS

AMP PANEL

DRAWING NUMBER:

JMF

3/31/15

RECORDED

MANAGEMENT

APPLICATION.

ALL APPROVAL

INFORMATION IS

ELECTRONICALLY

DRAWN BY:

DATE:

ANGLES ± 1/2°

FRACTIONS ± 1/32

(X.XX) = REF DIMS

TOLERANCE IN INCHES

X.X ± .1 X.XX ± .03 X.XXX ± .010

TO BE SYMMETRICAL

NO TOLERANCE IMPLIED

DIMENSIONS ACROSS CENTERLINES

TSC = THEORETICAL SHARP CORNER

ALL RIGHTS RESERVED

LOUD TECHNOLOGIES, INC.

CONFIDENTIAL PROPERTY OF

HEREIN IS PROPRIETARY AND

THE INFORMATION CONTAINED

5

4

8.22

19.79

[208.7]

[256.1]

6.00

[152.4]

[502.7]

TOP

B

25.75

[654.1]

SIDE

TO BOTH SIDES

DIMESNIONS APPLY

17.58

[446.5]

FRONT

GRILLE REMOVED FOR CLARITY

A

3

10.08

A

2

90

A

1

D

C

3

2

1

Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel [phone] | fax [phone] | www.eaw.com

APRIL2015Part Number: RD0885 Rev 100EAW products are continually improved. All specications are therefore subject to change without notice.