EAW PH-15 Instruction Manual

PH15

Paging Horn

INSTRUCTION MANUAL

Frequency Response

SPECIFICATIONS
Model PH-15

Rated Power (rms): 15W

Impedance: 667 Ω @ 15W, 1.3 kΩ @ 7.5W, 2.7 kΩ @ 3.75W, 5.3 kΩ @ 1.87W, OFF, 8Ω

Power Taps @ 100 V: 15W, 7.5W, 3.75W, 1.87W, OFF, 8Ω

Power Taps @ 70.7 V: 7.5W, 3.75W, 1.87W, 0.94W, OFF, 8Ω

SPL (1W/1m): 108dB

Max. SPL (15W/1m): 120dB

Freq. Range (–10dB): 460 Hz – 9K Hz

Freq. Range (–20dB): 300 Hz – 11K Hz

Dispersion @ 1 kHz/4 kHz: 110° / 30°

Water Protection: IEC529 IP66

Material: High impact ABS

Color/Finish: Light grey (RAL 7035)

Dimensions: 8.2 in/208 mm Diameter, 10.7 in/272 mm Length

Weight: 4.2 lb/1.9 kg

Mounting: U Type stainless steel bracket

Part No. 0010147 Rev. A 02/04
© 2004 LOUD Technologies Inc. All Rights Reserved.
Printed in China.

Safety First!

Before connecting and using the equipment, please
read this Quick-Start Guide carefully and keep it for
future reference.

WARNING! This equipment has been

designed to be installed by qualied
professionals only! There are many factors to be
considered when installing professional sound

WARNING!

• Installation by qualied personnel only.

• Speakers must be wired in parallel and
connected to the correct line terminals of
amplier.

• Ensure that all speakers have the same
polarity with respect to each other.

• The sum of the nominal power values of
all the speakers connected must not
exceed 80% of the amplier’s rated
output.

• Do not select another power tap while the
speaker is in use!

• No open ame sources, such as lighted
candles, should be placed on the
apparatus.

• To ensure normal cooling of the PH15,
make sure the unit is well ventilated.
Maintain a minimum distance of

1.2 in/30 mm around the apparatus for
sufcient ventilation.

• Avoid exposure to direct sunlight or
proximity to any heat source, dust, or
dampness.

• To prevent damage, do not use this
speaker with its front pointing upward.

reinforcement systems. Some of these factors
include mechanical and electrical considerations,
as well as acoustic coverage and performance.
LOUD Technologies strongly recommends
that this equipment be installed only by a
professional sound installer or contractor.

CAUTION: To avoid the risk of electric

shock, never allow this equipment to be

exposed to rain or dampness.

WARRANTY
Warranty: LOUD Technologies Inc. requires its authorized EAW Commercial distributors to abide by the

following warranty terms for all EAW Commercial brand products (all dates are from the date of delivery
from an Authorized EAW Commercial Distributor to the end user/installation site): Loudspeakers – 5 years;
Active Electronics – 5 years; Accessories – 2 years.

What Is Covered: Defects in workmanship and materials and against malfunctions. EAW Commercial
distributors must remedy all such defects and malfunctions without charge for parts or labor if the warranty
applies. Final determination of warranty coverage lies solely with each authorized EAW Commercial
distributor.

What Is Not Covered: This warranty does not extend to damage or malfunctions resulting from, but not
limited to, shipment, improper installation, misuse, neglect, abuse, normal wear, accident, or to any product
on which the serial number has been modied or removed. Exterior defects in or damage to the exterior
appearance are specically excluded from this warranty. EAW Commercial distributors shall not be liable for
incidental or consequential damages resulting from the use of EAW Commercial products. Repairs and/or
modications by other than an Authorized EAW Commercial Distributor automatically voids this warranty.

EAW Commercial | One Main Street | Whitinsville, MA 01588 USA

TEL toll free within US/Canada 888.337.7404 | TEL outside US 425.892.6503 | FAX [phone]

www.eawcommercial.com

© 2004 LOUD Technologies Inc. All Rights Reserved. EAW Commercial is a registered trademark of LOUD Technologies Inc.