EAW MK5000 Specifications
1. Inventory
Before beginning installation, inventory the MK2000 & MK5000 Bracket Kit, P/N0007869 to items listed.
Item
EAW P/N Qty Description
A 0006970 1 Bracket/MK2000/5000
B 102134 2 Screw, 3/8-16 x 1-1/2 Lg HHMS,
Black
C 105011 2 3/8 Washer, Lock, Black
D 105069 2 Washer, Flat, .40 I.D. x 2.00 O.D.,
18-8, Black.
E 105068 2 Grommet, Rubber,
0.38 I.D x 2.75 O.D. x .25 Thick.
F 0007873 1 Installation Instructions MK2000 &
MK5000 Bracket Kit (this sheet)
Warning: Installation should only be done by an experienced technician. Improper installation may cause serious injury.
The surface where the bracket/cabinet is to be fastened must have enough structural integrity to support 500 pounds.
2. Mounting the Bracket
Due to various construction methods and materials used
today, the hardware for securing the bracket to the mounting surface is not supplied. It is recommended that you
consult a building professional for the proper mounting
hardware before mounting the bracket. Make sure the
four openings in the bracket arms face upward.
4. Choosing which Slot to Use
There are three slots in each
bracket arm. Use the forward
slot for the MK5000 Series
cabinet and the second slot
for a MK2000 Series cabinet.
The third slot is to be used
when the mounted cabinets
side is parallel to the wall.
Installation Instructions
MK2000/5000 Bracket Kit
3. Removing the Shipping Hardware
Remove a flat head screw from each end
of the cabinet using a 5/32 Allen wrench.
(4) OPENINGS
FACING UPWARD
BRACKET/WALLMOUNT
MK2000/5000 EAW P/N 0006970
A
B
C
D
(12) Ø .41 THRU
16
5.33
C
L
E
26.67
.00
30.75
2.00
3.50
18.
23.62
71
MK5000
15.
54
MK2000
20.
00
5. Attaching the Cabinet Mounting Hardware:
Onto each of the two screws, place a lock washer,
a flat washer and a rubber grommet. Thread
these screws and related hardware three complete
turns into each of the cabinets side mounting holes.
7. Mounting the Bracket/Cabinet Vertically
The bracket and cabinet may be mounted vertically.
8. Positioning the Angle of the Cabinet:
The cabinet may be adjusted to any angle by loosening the hex head screw and re-tightening to desired position.
If you have questions about the MK 2000 & 5000 Bracket installation please contact the EAW Application Support Group:
Tel 800-992-5013 (USA only)
Tel 508-234-6158
Fax 508-234-8251
E-mail asg@eaw.com
The Laws of Physics | The Art of Listening
EAW is the worldwide technological and market leader in the design and manufacture of high-performance, professional loudspeaker systems.
EAW P/N 0007873 (A) JULY03
6. Mounting the Cabinet to the Bracket
Leave as large a space as possible between the rubber grommet
and the flat washer. Place the cabinet with the grommets and
washers to either side of the bracket as shown and tighten.
Thank you for purchasing
EAW products
RUBBER GROMMET
FLAT WASHER
MK5000
SHOWN
(2) FLAT WASHER 3/8
EAW P/N 105069
(2) RUBBER/GROMMET
3/8 I.D. X 2.75 O.D.
EAW P/N 105068
(2) LOCK
WASHER 3/8
EAW P/N 105011
(2) SCREW 3/8-16 X 1-1/2 LG
HHCS 18-8 BLK EAW P/N 102134
Loading...