EAW Loudspeaker KF760 Specifications
SPECIFICATIONS KF760
DESCRIPTION
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. KF760/0002962/2 pp April 2002 Printed in USA
PERFORMANCE
The KF760 is part of the KF760 Line Array Series. The KF760
Series uses advanced divergence shading where all loudspeakers are powered at equ al level. A full KF760/KF761 arr ay
can provide uniform sound coverage from directly beneath
itself out to hundreds of feet without complex signal processing. Vertical coverage for the array is set by varying the
splay of the rear of the enclosures, leaving the fronts tightpacked. This configuration produces a continuous, coherent
wavefront from the array, projecting extended range, highresolution sound over its full coverage area.
Quality construction features include, Baltic birch plywood
enclosures, heavy-duty steel grilles, Neutrik NL8 connectors,
heavy duty bar handles, rear hand-holds, and accessory caster pallets. Six Year Warranty.
This high output touring system is scalable from theaters
under 1,000 seats to stadiums . The KF760 is used as th e short
to long throw element of a KF760 Series line array providing
coverage in the range of 70 to 400 feet. The KF761 supplements the KF760s to pr ovid e n ear-fi eld cover age f or distan ces
less than 70 feet. The recommended minimum KF760/KF761
array size is four enclosur es . For full perform an ce ei gh t en closures are recommended. To extend the low frequency
response, KF940 SuperSubs™ make an ideal complement to
the KF760 Series.
Applications include:
Arenas Convention Centers Large Ballrooms
Stadiums Theaters Music Pavilions
Auditoriums Outdoor Events
Frequency Response (Hz)
±3 dB (1) Enclosure Array 80 Hz to 16 kHz
±3 dB (8) Enclosure Array 40 Hz to 16 kHz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF Single Enclosure 96
MF Single Enclosure 108
HF Single Enclosure 113
LF (8) Enclosure Array 106
MF (8) Enclosure Array 125
HF (8) Enclosure Array 117
Impedance (Ohms)
LF 2x 8
MF 8 (2@ 16 Ohm each)
HF 8 (2@ 16 Ohm each)
APPLICATION
PHYSICAL
Power Handling (Watts Continuous)
LF 2000
MF 800
HF 300
Recommended High-Pass Frequency
24dB/Octave 40 Hz
Calculated Maximum Output (dB SPL @ 1m)
Single Enclosure
LF Peak/Long Term 135/129
MF Peak/Long Term 142/136
HF Peak/Long Term 144/138
Eight (8) Enclosure Array
LF Peak/Long Term 154/148
MF Peak/Long Term 169/163
HF Peak/Long Term 156/150
Nominal Coverage Angle -6 dB points (degrees)
Horizontal 80
Maximum Vertical Splay 3
Product Group S
System Configuration 3-way, full range
Powering Tri-amplified
LF Subsystem 2x 12-in woofers, horn-loaded
MF Subsystem 2x 10-in cone, Radial Phase
Plug™, horn-loaded
HF Subsystem 2x 2-in exit/3-in voice coil
compression driver, horn-loaded
Enclosure (shape) Horizontal trapezoid
Enclosure Materials Exterior grade Baltic birch ply-
wood, urethane
Finish Wear-resistant black textured
paint
Connectors 2x Neutrik NL8
Suspension Hardware Proprietary EAW rigging system
Grille Powder coated perforated steel
SPECIFICATIONS KF760
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
Dimensions inches millimeters
Front Height 14.5 368
Rear Height 12.9 327
Width 45.0 1143
Depth 31.0 787
Trapezoid Angle 1.5 degrees top & bottom
Weights pounds kilograms
Net Weight 241 109.3
Shipping Weight 251 113.9
SYMBOL INDICATES CENTER OF BALANCE.
FRONT
C
L
14.50
2X .18 X 24.00
RUNNERS
3X GRILLES
PARTIALLY SHOWN
45.00
43.00
BACK
INPUT
C
L
6.62
10.00
HANDLE
7.00
.85
3.62
.66
TOP
DIMENSIONS APPLY TO
TOP AND BOTTOM
1.25
C
L
1.50
2X STACK
PAD
POCKET
4X EAW
PROPIETARY
RIGGING
SYSTEM
31.00
24.50
17.00
ACCESS
PANEL
TOP ONLY
7.88
4
H
3°
509120 (0)
6/28/01
The tri-amplified, three-way full range loudspeaker system
shall incorporate 2x 12-in LF transducers, 2x 10-in hornloaded cone transducers with Radial Phase Plug™ and 2x 2-in
exit/3-in voice coil compression drivers also horn-loaded.
The LF transducers shall each be loaded into a proprietary
bent-horn, with the horn mouths horizontally separated to
provide controlled off-axis cancellations to match the MF
beamwidth through the crossover region. The MF transducers
shall both be coupled into a single large format horn. The HF
transducers shall each be coupled to an HF horn coaxially
mounted with, and extended by, the MF horn. The system
shall have a nominal dispersion pattern of 80° (h) when used
as part of a KF760 line array.
System frequency respon se shall vary no mor e than ±3 dB from
80Hz to 16kHz measured on axis. The single loudspeaker’s
subsystems (LF/MF/HF) shall produce Sound Pressure Level
(SPL) of 96/108/113 dB SPL on axis at 1 meter with a power
input of 1 Watt, an d shall be capable of pr od ucin g a peak output of 135/142/144 dB SPL on axis at 1 meter. The eight (8)
enclosure array loudspeaker subsystems (LF/MF/HF) shall produce SPL of 106/125/117 dB SPl on axis at 1 meter with a
power of 1 Watt, and shall be capable of a peak output of
154/169/156 dB SPL on axis at 1 meter. The subsystems
(LF/MF/HF) shall handle 2000/800/300 Watts of amplifier
power (continuous) and shall have nominal impedances of 2x
8/8/8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of void-free cross-grain-laminated Baltic
birch plywood, and shall employ e xten sive in ternal bracing. It
shall be finished in wear-resistant te xtured black paint. Input
connector shall be a Neutrik NL8 with an additional NL8 provided for conn ect through. Proprietary rigging is provided f or
arraying. The front of the loudspeaker shall be covered with a
powder coated perforated steel grille.
The tri-amplified, three-way full range loudspeaker system
shall be the EAW model KF760.
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. KF760/0002962/2 pp April 2002 Printed in USA
3°
Manufacturing tolerances are +/- 0.13 and +/- 1°
PHYSICAL continued
ACCESS
PANEL
TOP AND
BOTTOM
4X .875 SQ
7.88
C
3°
L
4X
HANDLES
RIGHT SIDE
DIMENSIONS APPLY TO
29.75
14.50
BOTH SIDES
8.61
12.88
6.96
Loading...