EAW FB121 Declaration Of Conformity

CE DECLARATION OF CONFORMITY

PRODUCT

Product Model: FB121 p/n 0031170

p/n 0032275
Description: Fly Bar
Dimensions (h x w x d): 108 mm x 618 mm x 688 mm / 4.3 in x 24.3 in x 27.1 in
Material: A500 steel tubing, A36 steel bar stock, 4140 steel bar stock
Supplied Accessories: 2x Connecting Pin p/n 0031196-01
Accessories: Spare Connecting Pin p/n 0031196-01
M10 Eye Bolt p/n 0029818

JFL210 Loudspeaker p/n 0029139-90

p/n 0031237-90

JFL118 Loudspeaker p/n 0030529-90
p/n 0032250-90

COUNTRY OF ORIGIN FOR THE PRODUCT AND COMPONENTS

United States of America

TECHNICAL SPECIFICATIONS

The JFL210 and JFL118 loudspeakers are to be suspended below the FB121 Fly Bar or JFL118
loudspeaker. When used in accordance with the JFL Series Owner’s Manuals the Working Load Limits
(WLL) and Design Factor are:

Nominal Weight of JFL210 27 kg / 52 lb
Nominal Weight of JFL118 44 kg / 97 lb
Nominal Weight of FB121 13 kg / 29 lb
WLL (for Fly Bar mixed array) 277 kg / 611 lb
WLL (for Fly Bar JFL210 only array) 155 kg / 341 lb
WLL (for Fly Bar JFL118 only array) 277 kg / 611 lb
Ultimate Strength Design Factor >10:1

STANDARDS CONFORMITY

The FB121 Fly Bar is designed and intended to suspend JFL210 and JFL118 loudspeakers in accordance
with the JFL Series Owner’s Manual and FB121 Installation Instructions. Up to six (6) JFL210/JFL118
loudspeakers may be vertically suspended in a column below the FB121 Fly Bar. JFL210 loudspeakers
must be flown below JFL118 loudspeakers in a mixed array. JFL118 must be pinned to FB121 in all three
locations and JFL210 must be pinned in both locations. The total weight of any combination must not exceed
the WLL of the integral rigging components or that of the FB121 Fly Bar. For combinations of JFL210 and
JFL118, use the following formulas to determine maximum quantities of each. This keeps the total weight of
the JFL210/JFL118 combination within the above-specified WLL.

Maximum total quantities for suspended configurations using a combination of JFL210 and JFL118
loudspeakers are:

Maximum Total Combination
Maximum quantity JFL210 = 6 - quantity JFL118
Maximum quantity JFL118 = 6 - quantity JFL210
Quantity JFL210 + quantity JFL118 ≤ 6

The ultimate strength for the FB121 Fly Bar was determined utilizing calibrated and certified destructive pull­tests.

Eastern Acoustic Works Tel: [phone]
One Main Street e-mail: [e-mail]
Whitinsville, Ma 01588 www.eaw.com

Page 1 of 2 October 2008

Eastern Acoustic Works, as the manufacturer, hereby certifies that, in their delivered versions,
The FB121 Fly Bar complies with the provisions of the directives and standards listed below.

European Council Directive on Lifting Accessories, 98/37/EEC
BGV-C1: (German Standard for Lifting Accessories and Audio Rigging)
DIN 56950 (German Machinery Installation – Safety)

The Technical Report/File is maintained at:
LOUD Technologies Inc. Worldwide Headquarters
16220 Wood-Red Road NE
Woodinville, WA 98072 USA
Tel: [phone]
Tel: [phone]
Fax: [phone]
e-mail: [e-mail]

Authorized Representative:

Kevin Howard
Compliance Manager
LOUD Technologies Inc.
Issued: October, 2008

Eastern Acoustic Works Tel: [phone]
One Main Street e-mail: [e-mail]
Whitinsville, Ma 01588 www.eaw.com

Page 2 of 2 October 2008