EAW DCT2 User Manual

SPECIFICATIONS DCT2

FEATURES

DESCRIPTION

APPLICATION

PERFORMANCE

PHYSICAL

One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX [phone] [e-mail] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. DCT2/2 pp October 2001 Printed in USA

Frequency Response

±3 dB 5 kHz to 15 kHz

-10 dB 4.5 kHz

Axial Sensitivity (dB SPL, 1 watt @ 1 m)

HF 110

Nominal Input Impedance (ohms)

HF 32

Power Handling (watts, continuous)

HF 75

Recommended High-Pass Frequency

24 dB/octave 5 kHz

Calculated Output Limit (dB SPL @ 1 m)

HF Peak 134

HF Long Term 128

Nominal Beamwidth (degrees @ -6 dB SPL)

Horizontal 120

Vertical 100

Product Group Avalon

Configuration Dedicated VHF

VHF Subsystem 3x 1.33-in compression tweeters,

horn loaded

Enclosure Material

Exterior-grade Baltic birch plywood

Finish

Wear-resistant textured black paint

Connectors 2x Neutrik NL4 Speakon

Suspension Hardware 4x 1/4”-20 threaded mounting

points (4 top) for Omnimount
Series 100-type bracket

Dimensions inches millimeters

Height 5.3 133

Width 13.5 343

Depth 6.8 173

Baffle Angle 40°

Weights pounds kilograms

Net Weight 1 7 7.5

Shipping Weight 23 10.2

• Dedicated supertweeter array

• Three high frequency compression tweeters

• 120° (H) dispersion from wall- or loudspeaker-mounted

location

The DCT2 is engineer ed for use in perm an en t installati on s . The
system mounts three horn-loaded 1.33-in exit compression
tweeters in a wide-angled enclosure. The driver/phase plug
assemblies are engineered to minimize beaming of sound­waves with the smallest wavelengths, particularly in the hori­zontal plane.

The DCT2's wide-angled configuration delivers optimized 120°
horizontal dispersion of high frequencies when mounted adja­cent to or on a full-range system. It provides very high lev

els

of high frequency sound reinforcement for high energy

dance

clubs.
Like all EAW pr odu cts, it can be speci al order ed in virtually an y

color to match a specific décor. Six year warranty.

SPECIFICATIONS DCT2

DIMENSIONAL DRAWING

INPUT PANEL

One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX [phone] [e-mail] www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. DCT2/2 pp October 2001 Printed in USA

510943 (A)
7/31/01

Manufacturing tolerances are +/- 0.13 and +/- 1°

INDICATES MOUNTING POINT,
1/4-20 THREADED HOLE (T-NUT).
INDICATES CENTER OF BALANCE.

L

1.75

6.25

2.75

2.00

C

TOP

5.17

4.25

6.75

40¡

C

L

BACK

2.75 4.00

INPUT

L

C

3.00

FRONT

13.50

5.25

BOTTOM

(2.75)

RIGHT SIDE

PIN 1--...--
PIN 1+...+

WHITINSVILLE, MA USA

S/N

DCT2

NL4 MPNL4 MP

NL4 MPNL4 MP