EAW DCT1 User Manual
SPECIFICATIONS DCT1
FEATURES
PHYSICAL
PERFORMANCE
APPLICATION
DESCRIPTION
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. DCT1/2 pp October 2001 Printed in USA
Frequency Response
±3 dB 5 kHz to 15 kHz
-10 dB 4.5 kHz
Axial Sensitivity (dB SPL, 1 watt @ 1 m)
HF 110
Nominal Input Impedance (ohms)
HF 32
Power Handling (watts, continuous)
HF 100
Recommended High-Pass Frequency
24 dB/octave 5 kHz
Calculated Output Limit (dB SPL @ 1 m)
HF Peak 136
HF Long Term 130
Nominal Beamwidth (degrees @ -6 dB SPL)
Horizontal 360
Vertical 45
Product Group Avalon
Configuration Dedicated VHF
VHF Subsystem 4x 1.33-in compression tweeters,
horn-loaded
Enclosure Material
Exterior-grade Baltic birch plywood
Finish
Wear-resistant textured black paint
Connectors 2x Neutrik NL4 Speakon
Suspension Hardware 4x 1/4”-20 threaded mounting
points (4 top)
Dimensions inches millimeters
Height 9.0 229
Width 12.0 305
Depth 12.0 305
Baffle Angle 50°
Weights pounds kilograms
Net Weight 22 10.0
Shipping Weight 28 12.7
• Dedicated supertweeter array
• Four high frequency compression tweeters
• 360° (H) dispersion suspended directly overhead
The DCT1 is engineered for use inpermanent installations. The
system mounts four horn-loaded 1.33-in exit compression
tweeters in an inverted pyramid enclosure. The driver/phase
plug assemblies are engineered to minimize beaming of
soundwaves with the sm allest wavelengths, particularly in the
horizontal plane.
The DCT1's inverted pyramid configuration delivers optimized
360° horizon tal dispersion of high frequencies when suspended directly overhead. It provides very high levels of high frequency sound reinforcement for high energy dance clubs.
Like all EAW pr odu cts, it can be special or der ed in virtually an y
color to match a specific décor. Six year warranty.
SPECIFICATIONS DCT1
DIMENSIONAL DRAWING
INPUT PANEL
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. DCT1/2 pp October 2001 Printed in USA
510942 (A)
7/31/01
Manufacturing tolerances are +/- 0.13 and +/- 1°
INDICATES MOUNTING POINT,
1/4-20 THREADED HOLE (T-NUT).
INDICATES CENTER OF BALANCE.
TOP
12.00 SQ
BOTTOM
L
C
9.00
3.97
4X 49°
RIGHT SIDE
L
C
ACCESS PANEL
10.25 SQ
3.00
9.00 SQ
INPUT
4.00
BACK
6.00
PIN 1--...--
PIN 1+...+
WHITINSVILLE, MA USA
S/N
DCT1
NL4 MPNL4 MP
NL4 MPNL4 MP
Loading...