EAW DCS2 User Manual
• Advanced EAW horn technology provides prodigious output
in a relatively small enclosure
• Enhanced performance when used in multiples
• Dual heavy-duty 12-in woofers
The DCS2 bent horn subwoofer is engineered for use in permanent in stallati on s. The system loads purpose-designed dual
12-in drivers on an advanced bent bass horn, matching path
length to cone area. This technique maximizes driver efficiency and provides greater output than traditional directradiating dual 18-in subwoofers.
The DCS may be used for both high energy dance clubs and
live performance clubs. Multiple units can be configured in a
variety of ways to maximize effective horn size and low frequency coupling. Horn-loading produces the very high levels
of sub bass reinforcement required in modern clubs.
The DCS2 enclosure features exceptionally rugged construction. Like all EAW products, it can be special ordered in virtually any color to match a specific décor. Six year warranty.
SPECIFICATIONS DCS2
FEATURES
PERFORMANCE
PHYSICAL
DESCRIPTION
APPLICATION
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. DCS2/2 pp October 2001 Printed in USA
Frequency Response
±3 dB 45 Hz to 250 Hz
-10 dB 35 Hz
Axial Sensitivity (dB SPL, 1 watt @ 1 m)
Sub Bass 107
Nominal Input Impedance (ohms)
Sub Bass 4
Power Handling (watts, continuous)
Sub Bass 1000
Calculated Output Limit (dB SPL @ 1 m)
Sub Bass Peak 143
Sub Bass Long Term 137
Product Group Avalon
Configuration Dedicated subwoofer
Sub Bass Subsystem 2x 12-in woofers, horn-loaded
Enclosure Material
Exterior-grade Baltic birch plywood
Finish
Wear-resistant textured black paint
Connectors 2x Neutrik NL4 Speakon
Grille Zinc coated perforated steel
Dimensions inches millimeters
Height 36.0 914
Width 36.0 914
Depth 36.0 914
Weights pounds kilograms
Net Weight 246 111.4
Shipping Weight 266 120.4
SPECIFICATIONS DCS2
DIMENSIONAL DRAWINGS
INPUT PANEL
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. DCS2/2 pp October 2001 Printed in USA
INDICATES CENTER OF BALANCE.
L
C
36.00
22.75
DIMENSIONS APPLY
TO BOTH SIDES
RIGHT SIDE
BOTTOM
36.00
TOP
C
L
ACCESS PANEL
21.00
L
C
BACK
INPUT
4.18
LCCL
3.63
6.63
GRILL PARTIALLY SHOWN
FRONT
510963 (A)
8/24/99
Manufacturing tolerances are +/- 0.13 and +/- 1°
N E U T R I K
NL 4 MPR
N E U T R I K
N E U T R I K
NL 4 MPR
N E U T R I K
WHITINSVILLE, MA USA
NEUTRIK
NEUTRIK
NL 4 MPR
DCS2
S/N
NEUTRIK
NEUTRIK
NL 4 MPR
PIN 2--...-PIN 2+...+
TOP
Loading...