EAW DC5 User Manual
SPECIFICATIONS DC5
FEATURES
PERFORMANCE
APPLICATION
DESCRIPTION
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. DC5/2 pp October 2001 Printed in USA
Frequency Response
±3 dB 80 Hz to 18 kHz
-10 dB 50 Hz
Axial Sensitivity (dB SPL, 1 watt @ 1 m)
Full Range 97
Nominal Input Impedance (ohms)
Full Range 8
Power Handling (watts, continuous)
Full Range 500
Calculated Output Limit (dB SPL @ 1 m)
Full Range Peak 130
Full Range Long Term 124
Nominal Beamwidth (degrees @ -6 dB SPL)
Horizontal 90
Vertical 45
Product Group Avalon
Configuration 2-way full-range
Powering Full-range (passive LF/HF
crossover)
LF Subsystem 1x 12-in woofer, vented
HF Subsystem 1x 1.4-in exit/3-in voice coil
compression driver on CD horn
Enclosure Material
Exterior-grade Baltic birch plywood
Finish
Wear-resistant textured black paint
Connectors 2x Neutrik NL4 Speakon
Suspension Hardware
11x 3/8”-16 threaded mounting
points (4 top, 3 per side, 1 back)
Grille Zinc coated perforated steel
Dimensions inches millimeters
Height (front) 15.6 395
Height (rear) 12.0 306
Width 30.0 762
Depth 13.7 346
Weights pounds kilograms
Net Weight 65 29.6
Shipping Weight 77 35.0
PHYSICAL
• Compact two-way system for small dance clubs
• Very effective as a high-output DJ booth monitor
• One 12-in woofer, vented
• Horn-loaded 1.4-in exit/3-in voice coil HF compression
driver
• Cutaway rear corner directs cover ag e d own from its positi on
close to a ceiling
The DC5 is engineered for use in permanent installations. The
system includes a 12-in woofer in an optimally vented enclosure and a 1.4-in exit/3-in voice coil high frequency compression driver on a 90° (h) x 45° (v) dispersion constant
directivity horn. A complex asymmetrical internal passive
crossover/filter network provides subsystem integration,
ensuring coherent summation throughout the transition.
The DC5 compact, passive two-way dance club system provides high output, high definition reinforcement for small
clubs or smaller spaces within clubs. Overall design is robust
to ensure reliability in the face of continuous peak output
operation.
The DC5 is designed for overhead mounting in a horizontal
configuration to cover small dance floors or auxiliary spaces
within larger clubs. It is also very effective when used as a
high-output reference monitor in DJ booths. Its cutaway
upper-rear corner allows it to tuck up next to the ceiling
while angling its coverage down 20°. The enclosure includes
balance-optimized threaded mounting points.
Like all EAW products, it can be special ordered in virtually
any color to match a specific décor. Six year warranty.
SPECIFICATIONS DC5
DIMENSIONAL DRAWING
INPUT PANEL
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. DC5/2 pp October 2001 Printed in USA
INDICATES MOUNTING POINT,
1/4-20 THREADED HOLE (T-NUT).
15.54
8.29
FRONT
30.00
GRILL PARTIALLY SHOWN
4.00
13.64
TOP
15.25
6.25
L
C
6.56
12.03
7.50
INPUT
BACK
3.63
5.95
1.84
A
2.24
A
4.78
RIGHT SIDE
DIMENSIONS APPLY
TO BOTH SIDES
11.36
4.64
6.88
20°
7.00
L
C
1.50
26.07
510894 (0)
8/24/99
20°
INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (PI ANGLE).
INDICATES CENTER OF BALANCE
Manufacturing tolerances are +/- 0.13 and +/- 1°
ANGLED TOP VIEW
(VIEW A-A)
15.6
13.7
WHITINSVILLE, MA USA
NEUTRIK
NEUTRIK NEUTRIK
NL 4 MPR
DC5
S/N
NEUTRIK
NL 4 MPR
PIN 1--...-PIN 1+...+
Loading...