EAW DC3 User Manual
APPLICATION
SPECIFICATIONS DC3
FEATURES
DESCRIPTION
PERFORMANCE
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. DC3/2 pp October 2001 Printed in USA
Frequency Response
±3 dB 63 Hz to 18 kHz
-10 dB 50 Hz
Axial Sensitivity (dB SPL, 1 watt @ 1 m)
Passive MF/HF 104
LF 99
Impedance (ohms)
Passive MF/HF 8
LF 4
Power Handling (watts, continuous)
Passive MF/HF 250
LF 800
Calculated Output Limit (dB SPL @ 1 m)
Passive MF/HF Peak 134.0
LF Peak 134.0
Passive MF/HF Long term 128.0
LF Long Term 128.0
Nominal Beamwidth (degrees @ -6 dB SPL)
Horizontal 90
Vertical 40
Product Group Avalon
Configuration 3-way full-range
Powering Bi-amplified (passive MF/HF
crossover)
LF Subsystem 2x 12-in woofers, vented
MF Subsystem 1x 8-in cone, horn-loaded
HF Subsystem 1-in exit/1.75-in voice coil
compression driver on CD horn
Enclosure Material
Exterior-grade Baltic birch plywood
Finish
Wear-resistant textured black paint
Connectors 2x Neutrik NL4 Speakon
Suspension Hardware 8x 3/8”-16 threaded mounting
points (4 top, 2 per side)
Grille Zinc coated perforated steel
Dimensions inches millimeters
Height (front) 18.8 476
Height (rear) 16.0 407
Width 52.0 1321
Depth 16.0 406
Weights pounds kilograms
Net Weight 120 54.5
Shipping Weight 135 61.4
PHYSICAL
• Dual 12-in woofers maximize LF output
• Horn-loaded 8-in cone mid frequency section
• Horn-loaded 1-in exit/1.75-in voice coil HF compression
driver
• Cutaway rear corner directs coverage down from a position
close to the ceiling
• High-output system designed to deliver the extreme level
requirements of high energy dance clubs
The DC3 is engineered for use in permanent installations. The
system includes two 12-in woofers in an optimally vented
enclosure, a horn-loaded 8-in cone, and a 1-in exit/1.75-in
voice coil compression driver on a 90° (h) x 40° (v) dispersion constant directivity horn.
A complex asymmetrical internal passive crossover/filter network provides MF/HF subsystem integration. An MX Series
Close Coupled Processor™ should integrate the LF and MF/HF
subsystems.
The DC3 bi-amplified three-way dance club system provides
high output, high definition reinforcement for medium sized
clubs. Overall desi gn is r obust to ensure reliability in the face
of continuous peak output operation.
The DC3 is designed for overhead mounting in a horizontal
configuration to cover medium-sized dance floors or other
spaces within clubs. Its cutaway upper-rear corner allows it
to tuck up next to th e ceiling while an gling its coverag e down
20°. The enclosure includes balance-optimized threaded
mounting points.
Like all EAW products, it can be special ordered in virtually
any color to match a specific décor. Six year warranty.
SPECIFICATIONS DC3
DIMENSIONAL DRAWING
INPUT PANEL
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. DC3/2 pp October 2001 Printed in USA
INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (PI ANGLE).
INDICATES MOUNTING POINT
3/8-16 THREADED HOLE (NUT PLATE).
FRONT
AC
18.75
52.00
2X GRILLS PARTIALLY SHOWN
BACK
L
C
INPUT
ACCESS PANEL
3.63
10.21
6.63
14.50
1.84
TOP
1
C
L
1.96
16.00
8.50
6.81
2X 15°
48.07
(1.96)
SIDES
BACK
A
14.80
16.02
16.91
2.02
9.19
20°
A
BOTTOM
C
19.75
L
(4.32)
VIEW A-A
L
C
1.48
ROTATED 110° CCW
510889 (0)
8/24/99
2x 15°
20°
(VIEW A-A
Manufacturing tolerances are +/- 0.13 and +/- 1°
18.8
WHITINSVILLE, MA USA
NEUTRIK
NEUTRIK NEUTRIK
NL 4 MPR
DC3
S/N
NEUTRIK
NL 4 MPR
PIN 1--...LF-PIN 1+...LF+
PIN 2--...MF/HF-PIN 2+...MF/HF+
Loading...