EAW DC2 User Manual

SPECIFICATIONS DC2

FEATURES

DESCRIPTION

APPLICATION

PERFORMANCE

One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com EAW products are continually improved. All specifications are therefore subject to change without notice. DC2/2 pp October 2001 Printed in USA

Frequency Response

±3 dB 56 Hz to 18 kHz

-10 dB 45 Hz

Axial Sensitivity (dB SPL, 1 watt @ 1 m)

Passive MF/HF 108

LF 100

Nominal Input Impedance (ohms)

Passive MF/HF 6

LF 4

Power Handling (watts, continuous)

Passive MF/HF 350

LF 1600

Calculated Output Limit (dB SPL @ 1 m)

Passive MF/HF Peak 139

LF Peak 138

Passive MF/HF Long term 133

LF Long Term 132

Nominal Beamwidth (degrees @ -6 dB SPL)

Horizontal 90

Vertical 40

Product Group Avalon

Configuration 3-way full-range

Powering Bi-amplified (passive MF/HF

crossover)

LF Subsystem 2x 15-in woofers, vented

MF Subsystem 1x 10-in cone, horn-loaded

HF Subsystem 1.4-in exit/3-in voice coil com-

pression driver on CD horn

Enclosure Material

Exterior-grade Baltic birch plywood

Finish

Wear-resistant textured black paint

Connectors 2x Neutrik NL4 Speakon

Suspension Hardware 8x 3/8”-16 threaded mounting

points (4 top, 2 per side)

Grille Zinc coated perforated steel

Dimensions inches millimeters

Height (front) 22.5 572

Height (rear) 19.3 489

Width 57.1 1449

Depth 19.0 483

Weights pounds kilograms

Net Weight 190 86.5

Shipping Weight 207 94.2

PHYSCIAL

• Dual 15-in woofers maximize LF output

• Horn-loaded 10-in cone mid frequency section with Radial Phase Plug™

• Horn-loaded 1.4-in exit/3-in voice coil HF compression driver

• Cutaway rear corner directs coverage down from a position close to the ceiling

• High-output system designed to deliver the extreme level

requirements of high energy dance clubs

The DC2 is engineered for use in permanen t installations. The system includes dual 15-in woofers in an optimally vented enclosure, a horn-loaded 10-in midrange and a 1.4-in exit/3in voice coil high frequency compression driver on a 90° (h) x 40° (v) dispersion constant directivity horn.

A complex asymmetrical internal passive crossover/filter network provides MF/HF subsystem integration. An MX Series Close Coupled Processor™ should integrate the LF and MF/HF subsystems.

The DC2 bi-amplified three-way dance club system provides high output, high definition reinforcement for medium to large sized clubs. Overall design is robust to ensure reliability in the face of continuous peak output operation.

The DC2 is designed for overhead mounting in a horizontal configuration to cover medium to large sized dance floors. It is also very effective when used as a reinforcement system in live music clubs. Its cutaway upper-rear corner allows it to tuck up next to the ceiling while angling its coverage down 20°. The enclosure includes balance-optimized threaded mounting points.

Like all EAW products, it can be special ordered in virtually any color to match a specific décor. Six year warranty.

SPECIFICATIONS DC2

DESCRIPTION

INPUT PANEL

INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE (PI ANGLE).

INDICATES CENTER OF BALANCE

FRONT

22.50

57.05

GRILL PARTIALLY SHOWN

BACK

INPUT

PANEL

3.63

19.27

5.81

6.63

13.50

ACCESS

(2X 1.84)

510888 (0) 8/24/99

25°

20°

ANGLED TOP

Manufacturing tolerances are +/- 0.13 and +/- 1°

57.1

19.3

DC2

WHITINSVILLE, MA USA

NEUTRIK

NEUTRIK NEUTRIK

NEUTRIK

NL 4 MPR

11.17

19.00

S/N

NEUTRIK

NL 4 MPR

PIN 1--...LF-PIN 1+...LF+ PIN 2--...MF/HF-PIN 2+...MF/HF+

25°

23.44

TOP

2.39

4.48

8.06

20°

2.32

10.50

SIDES

53.37

(2X 1.84)

10.25

VIEW A-A

6.11

1.75