EAW CB423MX User Manual
Technical Specifications CB423MX
CINEMA SERIES
APPLICATION
• For small to medium-sized theaters
• Biamplified 3-way screen channel loudspeaker
PRODUCT INFORMATION
The CB423MX full-range screen channel loudspeaker system offers
small to medium-sized theaters a cost-effective entry to the future
of cinema audio – 3-way loudspeaker design. Its passive mid/high
design lets it replace existing biamped two-way systems without
requiring new electronic crossovers or amplifiers. (Electronic crossovers may require adjustment.)
Three-way design dramatically advances cinema audio quality by
improving the naturalness and intelligibility of dialog, eliminating
distortion from excessive driver excursion and extending pattern
control into the lower octaves.
The two component system includes a BV423 15-in low frequency
enclosure and an HK523MX mid/high section.
The low frequency enclosure uses optimally tuned enclosure venting
to increase LF response while limiting driver excursion. This method
produces less distortion and minimizes driver strain while extending
LF response to the lowest octaves. The enclosure’s shallow dimension allows convenient placement behind the screen.
CB423MX
24.83
TOP
HK523MX
BRACKET
EAW 606098
BV423
997112 (0)
exp 3/1/00 js
LEFT SIDE
INPUT
24.43
FRONT
The HK523MX MF/HF section features a horn-loaded 10-in cone and
a high power 1.4-in exit compression driver loaded with a 90° x
45° coverage pattern constant directivity horn.
The adjustable steel bracket attaching the mid/high section to the
LF enclosure can be positioned at one of three mounting points for
optimum front/rear placement. The bracket allows the mid/high
3.66
51.66
21.75
BACK
5.21
25°
ACCESS
PANEL
22.20 (POS 3)
18.69 (POS 2)
14.88 (POS 1)
section to be aimed independently of the LF section in both the
horizontal and vertical planes and can be locked once it is positioned.
The HK523MX's mid and high frequency sections are integrated via
a complex passive crossover/filter network. EAW's computer-designed passive filter networks are tightly aligned to the loudspeakers they control and go beyond merely dividing the signal, performing critical equalization functions.
Two-terminal barrier strip input connectors that accommodate bare
wire, tinned leads or spade lugs are included for both the LF and mid/
high sections. The input panels are located on the side and top of
the enclosures for convenient access in cramped installation areas.
15.88
INPUT
All external components feature a textured, non-reflective black
finish to eliminate the reflection of light through perforated cinema
RIGHT SIDE
screens.
One Main Street, Whitinsville, MA 01588 • (508) 234-6158 • FAX (508) 234-8251 • Email info@eaw.com • Web http://www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. • PUB# CB423MX-888166 (A)/3/1/00 • Printed In USA
Technical Specifications CB423MX
CINEMA SERIES
COMPONENTS & CONSTRUCTION
The CB423MX is a biamplified (passive mid/high) three-way, highoutput, full range loudspeaker system intended for use in behindscreen cinema applications. The two component system includes a
BV423 15-in low frequency enclosure and an HK523MX mid/high
system.
The system requires the use of an external active electronic
crossover between the LF and mid/high sections with a maximum
recommended crossover point of 350 Hz. The mid/high component
includes an internal passive crossover/filter network with the
crossover set at 1.43 kHz integrated via a complex passive crossover/
filter network. EAW's computer-designed passive filter networks are
tightly aligned to the loudspeakers they control and go beyond
merely dividing the signal, performing critical equalization functions.
The BV423 low frequency component features a single 15-in woofer
mounted in a vented enclosure for excellent bass extension and high
output level capability.
The HK523MX mid/high component features a horn-loaded 10-in
midrange driver and a 1.4-in exit compression driver mounted to a
medium format 90° x 45° constant directivity horn.
Input connectors for both the LF and mid/high components are 2terminal barrier strips that accommodate bare wire, tinned leads or
spade lugs. Separate input connectors are provided for the LF and
mid/high components. A pre-installed "jumper cable" continues the
signal chain to the HF section.
The LF cabinet is constructed of 3/4-in Medium Density Fiberboard
(MDF). The HK523MX mid/high section is constructed of 3/4-in MDF
with the exception of the mid frequency flare which is void-free, 18ply-to-the-inch, Baltic birch plywood backed with high density
polyurethane foam. Both sections are coated with a non-reflective,
textured black finish and the HF horn is constructed of flat black
structural foam plastic.
DESCRIPTIVE DATA
LF Subsystem & Loading 1x 15-in vented
MF Subsystem & Loading 1x 10-in horn loaded
HF Subsystem & Loading 1x 1.4-in exit compression driver
on CD horn
Number of Audio Bands 3-way
Powering Mode Biamp
Recommended Crossover EAW CX300-CB423MX
Cabinet Type (shape) Rectangular
Enclosure Materials LF-3/4-in MDF; 15mm
Birch Plywood Baffle — MF/HF-MDF
Finish Textured Black
Connectors 2x 2-Termimal Barrier Strip
NOMINAL DATA
Frequency Response (1 Watt @ 1m)
±3 dB 42 Hz - 19 kHz
Axial Sensitivity (dB SPL, 1 Watt @1m)
LF 98
Passive MF/HF 105
Impedance (Ohms)
LF 8
Passive MF/HF 8
Power Handling (Watts)
LF 500
Passive MF/HF 350
Calculated Maximum Output (dB SPL @ 1m)
LF Peak 131.0
Passive MF/HF Peak 136.6
LF Long Term 125.0
Passive MF/HF Long term 130.6
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal 90
Vertical 45
Dimensions & Weights Inches Centimeters
Height 51.66 1312
Width 24.83 631
Depth 22.20 564
Weights Pounds Kilograms
Net Weight (approx) 150 68.1
Shipping Weight (approx) 165 74.1
One Main Street, Whitinsville, MA 01588 • (508) 234-6158 • FAX (508) 234-8251 • Email info@eaw.com • Web http://www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. • PUB# CB423MX-888166 (A)/3/1/00 • Printed In USA
Loading...