EAW CAM60 User Manual
DESCRIPTION
CAM60-MIXER AMPLIFIER
1 2 3 4
CAUTION:
ELECTRIC SHOCK HAZARD
DO NOT REMOVE COVER.
REFER SERVICING TO
QUALIFIED PERSONNEL.
SEE INSTRUCTION MANUAL.
INPUT 1INPUT 2INPUT 3INPUT 4
MONITOR
VOL
TEL
VOL
PRE
OUT
MAIN
IN
R
L
BALANCED
-
+ TEL PAGING
8
TR
G
PRIORITY
1W
+
100V70V 25V
4
COM
DC 24V
-
OFF
DC SW
GND
115VAC/230VAC ~ 60Hz/50Hz
ON
PHANTOM
24V
LINE MIC
PHANTOM
24V
LINE MIC
PHANTOM
24V
LINE MIC
PHANTOM
24V
LINE MIC
1: for CD
2: for Tuner
3: for Tape
4: for AUX IN
© 2004 LOUD TECHNOLOGIES INC.
"EAW" IS A REGISTERED TRADEMARK
OF LOUD TECHNOLOGIES INC.
CAM60-MIXER AMPLIFIER
The CAM60 is designed for continuous duty in speech, music,
paging, and sound reinforcement applications demanding high
performance, exible features, and rugged dependability. Each of
the four, actively balanced, mic/line inputs have combination XLR1/4 in input jacks and a sensitivity switch for line level, mic level, or
mic-level with 24 V DC phantom power. Aux stereo and telephone
paging inputs are also provided as well as a signal processing loop.
Input 1 has voice-activated priority over Inputs 2 to 4 and the Aux
Input. Inputs 1 to 4 have switch-activated priority over the Aux input.
The Telephone Paging input has voice-activated priority over all
inputs. The front panel includes Mic/Line input, Aux, and Master level
controls, as well as bass and treble. An LED meter indicates signal
strength and output overload. An internal 1 watt amplier with level
control allows monitoring the Aux input.
CAM60
5 INPUT x 1 OUTPUT 60 W MIXER-AMPLIFIER
Features
• Discrete component 60 W power amplier
• Signal processing loop
The CAM60 provides outputs for 4 ohm loads and for 25 V, 70 V, and
100 V distributed systems. The output stage has smart circuitry to
protect against permanent damage caused by overloading, shorts,
and extreme temperatures. The CAM60 operates on 115 V or 230 V
AC mains determined by a voltage select switch. A 24 V DC power
input allows connecting backup battery power with automatic AC to
DC switchover. Five year warranty.
• Multiple priority override circuits
• 2 rack unit mounting kit included
Applications
• Paging Systems • Houses of Worship
• Hotel and Ballrooms • Meeting Rooms
• Schools • Oces
• Foreground/Background Music Systems
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 1 of 2
Part No. SW0139 Rev. B 05/07
PERFORMANCE
Input 1-4 (balanced / unbalanced)
Sensitivity Impedance
Mic 0.5 mV / 1 mV 600 ohm
Line 50 mV / 200 mV 47k ohm
Aux In (unbalanced)
Aux 100 mV 20k ohm
Tuner 180 mV 30k ohm
Tape 320 mV 50k ohm
CD 570 mV 80k ohm
Tel/Paging (balanced / unbalanced)
Variable 600 ohm
Main In (unbalanced)
1 V 10k ohm
Output
Maximum Load Impedance
Preamp 1 V (nominal) 600 ohm
Monitor 1 W 8 ohm
Low Z 60 W 4 ohm
High Z 25 V / 70 V / 100 V 4 ohm / 33 ohm / 67
ohm
Operating Range (+/-3 dB)
Mic In to Amp Out 50 Hz to 15 kHz
Noise
>60 dB (below maximum output)
Distortion (THD, 60 W @1 kHz)
<0.5%
CAM60
5 INPUT x 1 OUTPUT 60 W MIXER-AMPLIFIER
PHYSICAL
Front Controls
Type Range
Input 1-4 Level 0 to 10
Aux Level 0 to 10
Equalization Lo +/-10 dB @ 100 Hz
Hi +/-10 dB @ 10 kHz
Volume Level 0 to 10
Power AC mains On / Off
Rear Controls
Input 1-4 Select Line/Mic/Phantom 24V
Power Switch 24 V DC On / Off
Aux Select CD/Tuner/Tape/Aux
Tel & Mon Vol Level
Mains Power
Rating Fuse
AC (50/60 Hz)
DC 24 V 15 A fuse
Power Input 345 W
Environmental
Maximum Ambient 131° F / 55° C
Humidity Non-precipitating
Dimensions (inches / mm)
H x W x D 3.9 x 17.1 x 13.2 100 x 435 x 335
Weight (approximate net lb / kg)
25.6 11.6
115 V / 230 V (+/-5%)
2.5 A fuse
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 2 of 2
Part No. SW0139 Rev. B 05/07
Loading...