EAW CAM150 User Manual

DESCRIPTION

1 2 3 4

CAUTION:
ELECTRIC SHOCK HAZARD
DO NOT REMOVE COVER.
REFER SERVICING TO
QUALIFIED PERSONNEL.
SEE INSTRUCTION MANUAL.

INPUT 1INPUT 2INPUT 3INPUT 4

MONITOR

VOL

TEL
VOL

PRE
OUT

MAIN

IN

R

L

BALANCED

-

+ TEL PAGING

8

TR

G

PRIORITY

1W

+

100V70V 25V

4

COM

DC 24V

-

OFF

DC SW

GND

115VAC/230VAC ~ 60Hz/50Hz

ON

PHANTOM

24V

LINE MIC

PHANTOM

24V

LINE MIC

PHANTOM

24V

LINE MIC

PHANTOM

24V

LINE MIC

1: for CD
2: for Tuner
3: for Tape
4: for AUX IN

© 2004 LOUD TECHNOLOGIES INC.

"EAW" IS A REGISTERED TRADEMARK

OF LOUD TECHNOLOGIES INC.

CAM150-MIXER AMPLIFIER

The CAM150 is designed for continuous duty in speech, music,

paging, and sound reinforcement applications demanding high

performance, exible features, and rugged dependability. Each of

the four, actively balanced, mic/line inputs have combination XLR-

1/4 in input jacks and a sensitivity switch for line level, mic level, or

mic-level with 24 V DC phantom power. Aux stereo and telephone

paging inputs are also provided as well as a signal processing loop.

Input 1 has voice-activated priority over Inputs 2 to 4 and the Aux

Input. Inputs 1 to 4 have switch-activated priority over the Aux

input. The Telephone Paging input has voice-activated priority over

all inputs. The front panel includes Mic/Line input, Aux, and Master

level controls, as well as bass and treble. An LED meter indicates

signal strength and output overload. An internal 1 watt amplier

with level control allows monitoring the Aux input.

CAM150

5 INPUT X 1 OUTPUT 150 W MIXER-AMPLIFIER

Features

• Discrete component 150 W power amplier

• Signal processing loop

• Multiple priority override circuits

• 2 rack unit mounting kit included

The CAM150 provides outputs for 4 ohm loads and for 25 V, 70 V,

and 100 V distributed systems. The output stage has smart circuitry

to protect against permanent damage caused by overloading,

shorts, and extreme temperatures. The CAM150 operates on 115

V or 230 V AC mains determined by a voltage select switch. A 24

V DC power input allows connecting backup battery power with

automatic AC to DC switchover. Five year warranty.

Applications

• Paging Systems • Houses of Worship

• Hotel and Ballrooms • Meeting Rooms

• Schools • Oces

• Foreground/Background Music Systems

TEL outside US 425.892.6503 | FAX [phone] | Page 1 of 2

Part No. SW0140 Rev. B 07/07

Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404

PERFORMANCE

Input 1-4 (balanced / unbalanced)

Sensitivity Impedance
Mic 0.5 mV / 1 mV 600 ohm

Line 50 mV / 200 mV 47k ohm

Aux In (unbalanced)

Aux 100 mV 20k ohm
Tuner 180 mV 30k ohm
Tape 320 mV 50k ohm
CD 570 mV 80k ohm

Tel/Paging (balanced / unbalanced)

Variable 600 ohm

Main In (unbalanced)

1 V 10k ohm

Output

Maximum Load Impedance
Preamp 1 V (nominal) 600 ohm

Monitor 1 W 8 ohm
Low Z 150 W 4 ohm
High Z 25 V / 70 V / 100 V 4 ohm / 33 ohm / 67

ohm

Operating Range (+/-3 dB)

Mic In to Amp Out 50 Hz to 15 kHz

Noise

>60 dB (below maximum output)

Distortion (THD, 60 W @1 kHz)

<0.5%

CAM150

5 INPUT X 1 OUTPUT 150 W MIXER-AMPLIFIER

PHYSICAL
Front Controls

Type Range
Input 1-4 Level 0 to 10

Aux Level 0 to 10
Equalization Lo +/-10 dB @ 100 Hz
Hi +/-10 dB @ 10 kHz
Volume Level 0 to 10
Power AC mains On / Off

Rear Controls

Input 1-4 Select Line/Mic/Phantom 24V
Power Switch 24 V DC On / Off
Aux Select CD/Tuner/Tape/Aux
Tel & Mon Vol Level

Mains Power

Rating Fuse
AC (50/60 Hz)

DC 24 V 15 A fuse
Power Input 345 W

Environmental

Maximum Ambient 131° F / 55° C
Humidity Non-precipitating

Dimensions (inches / mm)

H x W x D 3.9 x 17.1 x 13.2 100 x 435 x 335

Weight (approximate net lb / kg)

25.6 11.6

115 V / 230 V (+/-5%)

2.5 A fuse

Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404

TEL outside US 425.892.6503 | FAX [phone] | Page 2 of 2

Part No. SW0140 Rev. B 07/07