EAW AS625e User Manual
SPECIFICATIONS AS625e
DESCRIPTION
APPLICATION
PERFORMANCE
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. AS625e/2 pp October 2001 Printed in USA
A dedicated low frequency/subwoofer system in a trapeziodal
enclosure. Includes 2x 15-in woofers, vented.
The AS625e is engineered for use in permanent installations.
It can serve as a low frequency module when used with the
AS460e or AS490e mid/high modules or as a subwoofer when
used with the AS660e or AS690e full rang e system s . I ts trapezoid angles create the ideal splay for arrays of 2x AS660e’s or
AS460e's. Includes comprehensive 3/8"-16 mounting/suspension points. Six year warranty.
Applications include:
Stadiums Arenas
Performing ArtsCenters Houses of Worship
PER-
Frequency Response (Hz)
±3 dB 57 Hz to 500 Hz
-10 dB 45 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF 100
Impedance (Ohms)
LF 4
Power Handling (Watts, Continuous)
LF 1200
Recommended High-Pass Frequency
24 dB/Octave 40 Hz
Calculated Maximum Output (dB SPL @ 1m)
LF Peak 136
LF Long Term 130
Product Group I
System Configuration Dedicated low frequency system
LF Subsystem & Loading 2x 15-in, vented
Cabinet Type (shape) Trapezoidal
Enclosure Materials Exterior grade Baltic birch
plywood
Finish Wear-resistant textured black
paint
Connectors 2-Contact terminal strip
Suspension Hardware (18) 3/8"-16 threaded mount
ing/suspension points (4 each
top, bottom and sides, 2 on
back)
Grille Powder coated perforated steel
Dimensions inches millimeters
Height 36.0 914
Width (Front) 24.6 626
Width (Rear) 16.5 419
Depth 23.0 584
Trapezoid Angle 10 degrees per side
Weights pounds kilograms
Net Weight 149 67.8
Shipping Weight 167 76
PHYSICAL
SPECIFICATIONS AS625e
DIMENSIONAL DRAWING
A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. AS625e/2 pp October 2001 Printed in USA
INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE
(PI ANGLE).
INDICATES MOUNTING POINT, 3/8-16 THREADED HOLE
(NUT PLATE).
SYMBOL INDICATES CENTER OF BALANCE.
FRONT
36.00
24.62
GRILLE PARTIALLY SHOWN
BACK
(1.50)
C
L
C
L
7.34
4.00
33.00
INPUT
5.00
TOP/BOTTOM
8.75
23.00
4.24
16.31
C
L
A
13.64
19.39
(16.51)
A
20°
16.56
C
L
4.63
32.10
20°
509140 (0)
5/22/01
The low frequency loudspeaker system shall incorporate 2x
15-in LF transdu cers that shall be m ounted in a vented enclosure tuned for optimum LF response.
System frequency response shall vary no more than ±3 dB
from 57 to 500 Hz measured on axis . The system shall pr odu ce
a Sound Pressure Level (SPL) o f 100 dB SPL on axis at 1 meter
with a power input of 1 Watt, and shall be capable of producing a peak output of 136 dB SPL on axis at 1 meter. The
system shall handle 1200 Watts of amplifier power (continuous) and shall have a nominal impedance of 4 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of multi-ply, void-free, cross-grain-laminated, exterior grade, Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in wear-resistant textured black paint. Input connector shall be 2-contact
terminal strip. Eighteen (18) 3/8"-16 thr eaded m ountin g/suspension points (4 each top, bottom and sides, 2 on back)
shall be provided. The front of the loudspeaker shall be covered with a powder coated perforated steel grille.
The low frequency loudspeaker shall be the EAW model
AS625e.
SIDE VIEW (VIEW A-A)
Manufacturing tolerances are +/- 0.13 and +/- 1°
Loading...