EAW AS422e User Manual
SPECIFICATIONS AS422e
DESCRIPTION
APPLICATION
PERFORMANCE
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. AS422e/2 pp October 2001 Printed in USA
A dedicated low frequency system in a trapeziodal enclosure.
Includes 2x 12-in woofers mounted on slanted baffles, separated vertically.
The AS422e is engineered for use in permanent installations.
It complements the AS460e or AS490e mid/high modules to
provide full range performance in a flexible, modular, multienclosure format. It’s trapezoid angles create the ideal splay
for arrays of 2x AS460e's. Includes comprehensive 3/8"-16
mounting/suspension points. Six year warranty.
Applications include:
Stadiums Arenas
Performing Arts Centers Houses of Worship
Frequency Response (Hz)
±3 dB 67 Hz to 500 Hz
-10 dB 50 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF 102
Impedance (Ohms)
LF 4
Power Handling (Watts, Continuous)
LF 800
Recommended High-Pass Frequency
24 dB/Octave 40 Hz
Calculated Maximum Output (dB SPL @ 1m)
LF Peak 137
LF Long Term 131
Product Group I
System Configuration Dedicated low frequency system
LF Subsystem & Loading 2x 12-in, vented
Cabinet Type (shape) Trapezoidal
Enclosure Materials Exterior grade Baltic birch
plywood
Finish Wear-resistant textured black
paint
Connectors 2-Contact terminal strip
Suspension Hardware (18) 3/8"-16 threaded mount
ing/suspension points (4 each on
top, bottom and sides, 2 on back)
Grille Powder coated perforated steel
Dimensions inches millimeters
Height 22.5 572
Width (Front) 24.6 626
Width (Rear) 16.5 419
Depth 23.0 584
Trapezoid Angle 10 degrees per side
Weights pounds kilograms
Net Weight 90 41.0
Shipping Weight 105 47.8
PHYSICAL
SPECIFICATIONS AS422e
DIMENSIONAL DRAWING A & E SPECIFICATIONS
One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. AS422e/2 pp October 2001 Printed in USA
INDICATES MOUNTING POINT,
3/8-16 THREADED HOLE (PI ANGLE)
INDICATES MOUNTING
POINT,
3/8-16 THREADED HOLE (NUT PLATE).
INDICATES CENTER OF BALANCE.
FRONT
22.50
24.62
GRILLE PARTIALLY SHOWN
BACK
4.00
(1.50)
C
5.00
L
L
C
19.50
6.94
ACCESS PANEL
INPUT
TOP/BOTTOM
16.31
23.00
4.24
L
C
A
A
20°
11.75
19.39
(16.51)
13.64
The low frequency loudspeaker system shall incorporate 2x
12-in LF transducers that shall be mounted in slanted baffles
and separated vertically.
System frequency response shall vary no more than ±3 dB
from 67 to 500 Hz measured on axis . The system shall pr odu ce
a Sound Pressure Level (SPL) o f 102 dB SPL on axis at 1 meter
with a power input of 1 Watt, and shall be capable of producing a peak output of 137 dB SPL on axis at 1 meter. The
system shall handle 800 Watts of amplifier power (continuous) and shall have a nominal impedance of 4 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of multi-ply, void-free cross-grain-laminated, exterior grade, Baltic birch plywood and shall employ
extensive internal bracing. It shall be finished in wear-resistant textured black paint. Input connectors shall be 2-contact
terminal barrier strips. Eighteen (18) 3/8"-16 threaded
mounting/suspen si on poin ts (4 each top, bottom and si d es , 2
on back) shall be provided. The front of the loudspeaker shall
be covered with a powder coated perforated steel grille.
The low frequency loudspeaker shall be the EAW model
AS422e.
20°
509139 (0)
5/22/01
Manufacturing tolerances are +/- 0.13 and +/- 1°
16.56
4.63
C
L
18.60
DIMENSION APPLY
TO BOTH SIDES
SIDES
Loading...