EAW Anya, Anna, Adaptive Seres, Otto Application Manual
About Adaptive Performance™
Adaptive Performance™ is an EAW technology that allows FOH engineers and system technicians to
easily provide ideal coverage in any environment or audience geometry. Utilizing proprietary software
and hardware, Adaptive Systems such as Anya, Anna, and Otto provide users with the remarkable
ability to define (and redefine) their coverage in situ, after the system has been deployed or even midshow. Should the audience size increase or decrease, the systems engineer can affect changes in
seconds – simply by entering the desired coverage and uploading these parameters to the arrays.
Adaptive Systems accomplish this while also providing extraordinary output, consistency and fidelity at
all volume levels and coverage patterns.
This Application Guide will provide users with information on Adaptive System application and design
concepts, system integration, and examples using typical venues.
Table of Contents
About Adaptive Performance™ ............................................................................................................. 1
Overview ................................................................................................................................................... 4
About Adaptive Arrays ........................................................................................................................... 4
Anya Driver Compliment ................................................................................................................... 4
Anya Nominal Coverage .................................................................................................................... 4
Anna Driver Compliment ................................................................................................................... 5
Anna Nominal Coverage .................................................................................................................... 6
About Otto ............................................................................................................................................. 7
Otto Driver Compliment .................................................................................................................... 7
Array and Overall System Design ............................................................................................................... 8
Array Coherency ................................................................................................................................ 8
Subwoofers ........................................................................................................................................ 8
System Design Practices ............................................................................................................................ 8
Designing with Anya and Anna .......................................................................................................... 8
Using EAW Resolution™ .................................................................................................................... 9
How Array Length Affects Directivity ............................................................................................... 10
Anya: LF Control and ‘Throw’ .......................................................................................................... 12
Anna: LF Control and ‘Throw’ .......................................................................................................... 12
How Adaptive Systems Handle Horizontal Coverage with Multiple Columns ................................. 13
Split Coverage to Avoid Balcony Faces and Other Obstacles ........................................................... 14
Truck Pack Examples ........................................................................................................................ 15
Integrating Otto with Anya and Anna .............................................................................................. 16
Venue Design Examples ........................................................................................................................... 16
Venue: Live Club .................................................................................................................................. 17
Venue: House of Worship – Fan .......................................................................................................... 19
Venue: Theater .................................................................................................................................... 21
Venue: Arena ....................................................................................................................................... 23
Venue: Shed......................................................................................................................................... 25
Venue: Stadium ................................................................................................................................... 27
Venue: Outdoor Festival ...................................................................................................................... 29
Contacting EAW ....................................................................................................................................... 33
Application Engineering ....................................................................................................................... 33
2
EAW Service ............................................................................................. Error! Bookmark not defined.
General ................................................................................................................................................ 33
3
Overview
About Adaptive Arrays
Adaptive arrays are designed using only three module types: Anya, Anna, and Otto. Each column in an
array can only consist of one module type, and columns of Anya and Anna can be combined to create
mixed, multi-column arrays. Since the vertical coverage of the system is adaptable from 90° down to
90° up, supplemental “downfill” or “upfill” enclosures are unnecessary. Attention should be paid to the
horizontal coverage requirements as Anya/Anna does not increase or decrease coverage in the
horizontal plane via DSP. This is achieved by attaching additional columns to the array.
Anya Driver Compliment
LF – Dual 15” direct radiating with Offset Aperture™ loading
MF – Six 5” horn-loaded with CSA™ apertures and Radial Phase Plugs™
HF – Fourteen 1” horn-loaded on proprietary waveguide
Each component within an Anya module is independently powered and processed using state-of-theart electronics. These electronics are contained in each module’s Power Plant, providing 22 channels of
amplification, 22 channels of DSP, and all necessary networking components in a field-replaceable
highly weather-resistant package.
Anya Nominal Coverage
Horizontal – 70° when used as a single column. Columns array on 60° centers (10° overlap total, 5°
overlap from each column) to minimize the transition from one column to another.
4
Vertical – Completely Variable
It should be noted that the vertical coverage of Anya, as calculated by Resolution software, will almost
always be asymmetrical. Vertical coverage is never derived from fixed Q (i.e. 45°, 60°, 90°, aimed at 10°
down) but will be contoured to provide the most consistent coverage possible. This means that the
pattern will be complex.
Anna Driver Compliment
LF – Dual 10” direct radiating with Offset Aperture™ loading
MF – Four 5” horn-loaded with CSA™ apertures and Radial Phase Plugs™
HF – Eight 1” horn-loaded on proprietary waveguide
Each component within an Anna module is independently powered and processed using state-of-theart electronics. These electronics are contained in each module’s Power Plant, providing 14 channels of
amplification, 14 channels of DSP and all necessary networking components in a field-replaceable
highly weather-resistant package.
5
Anna Nominal Coverage
Horizontal – 100° when used as a single column. Columns array on 90° centers (10° overlap total, 5°
overlap per column) to minimize the transition from one column to another.
Vertical – Completely Variable
6
About Otto
Otto arrays are designed with a single module type. Each Otto module includes Offset Apertures in all
four corners and two independently-processed 18” woofers to generate a variety of coverage patterns,
even from only a single module.
Otto modules are designed to be tight-packed, with interlocking flybars and IR transceivers on all faces.
“Shotgun” or end-fire arrays, “delay-arc” or broadside arrays, and simple single-column stacks are all
readily achievable depending on the performance and logistical requirements of a given event or
venue.
Otto is designed to both extend and augment the low-frequency response of any Adaptive product.
Depending on the system configuration and performance needs, engineers may choose to low-pass
Otto simply to provide additional extension, or may overlap Otto and other Adaptive products to
supplement both extension and output.
Otto Driver Compliment
VLF – Dual 18” woofers with Offset Aperture™ loading. As with all Adaptive products, each driver is
independently powered and processed. All amplification and processing electronics are housed in the
unit’s Power Plant.
7
Array and Overall System Design
Adaptive arrays are constructed in two different ways. The vertical coverage is completely variable
regardless of the number of modules in the column, meaning that the number of modules deployed is
determined by the SPL and directivity requirements only. The horizontal coverage is increased by
physically adding columns to the array. Resolution software’s “Array Assistant” is designed to assist in
creating a 3-dimensional coverage prediction based on the number of modules physically available.
Simply define the venue as a model in Resolution, launch the Array Assistant, and it will guide you to
the final result. Modifications to the result are certainly possible, and both coverage requirements and
the number of modules used can be redefined or adjusted at any time. Each time a change is made in
Resolution the parameters are automatically recalculated and the results displayed for review. Once it
is confirmed that the model represents your intentions, simply upload the new settings to the Adaptive
arrays and the system will be ready.
Array Coherency
Producing a coherent wavefront from multiple enclosures containing multiple transducers represents
the primary challenge in system design, especially when these enclosures are arrayed in both the
vertical and horizontal planes. Fortunately, Anya and Anna were designed from the beginning to
maximize coherency by allowing each column in an array to be physically configured in only one way.
Modules hang straight without any “J” curvature and combine horizontally with their cabinet faces
completely closed. This removes any opportunity for physically mismanaged arrays and provides a
highly predictable physical design from which to model.
Subwoofers
Although the use of subwoofers is optional, certain music types and environmental conditions may
require additional subwoofer support. If additional subwoofer support is desired, EAW Otto should be
utilized as the ideal match for Anya and Anna. This subwoofer extends Adaptive Performance into the
sub-bass range, providing the optimal low-frequency coverage pattern for the venue.
System Design Practices
Designing with Anya and Anna
The number of modules used in any Adaptive array is predicated on a number of factors. Since the
vertical dispersion of the array is determined by EAW Resolution software and any sized column can be
adjusted anywhere within a 180° vertical beamwidth, the factors to be considered in defining an
Adaptive array design are simplified to the following:
1) Horizontal coverage – The horizontal coverage for Anya is defined by how many columns are
assembled in each array. Columns are arrayed in 60° arc segments (60°, 120°, 180°, 240°, 300°,
360°). Horizontal coverage for Anna is also defined by the number of columns in the array.
Columns are arrayed in 90° arc segments (90°, 180°, 270°, 360°). Additionally, EAW Resolution
applies processing to align multiple columns for the smallest column-to-column seam possible.
2) Overall SPL requirement – As one would expect, the overall available SPL for an Adaptive array
is determined by the number of enclosures in the array. Often, systems are designed around
8
the demands for SPL at the mix position. Most professional Front-Of-House (FOH) engineers
have a sense of what sound levels they will need for their particular artist. Adaptive modules
are easily added or removed from arrays, and a wide variety of SPL calculations performed to
assist in accurately determining the right number of modules needed for a given SPL
requirement. Additionally, Resolution’s Array Assistant is designed to assist the designer in
balancing coverage, output and consistency given a certain number of available modules and
any physical restrictions (maximum height and minimum trim).
3) Directivity – Anya, Anna, and Otto adhere to classic line source theory when discussing
directivity. Like any true line source, the frequency at which directivity begins is determined by
the overall physical length of the line. More simply: the longer the array, the lower in
frequency the array can control the directivity. Directivity can have significant benefits in
controlling spill onto the stage, noise control in outdoor venues, minimizing reflections
indoors, and “throw” distance.
Using EAW Resolution™
EAW Resolution is the key to determining the optimal array configuration for any application. Rooted
in EAW’s proprietary FChart modeling and calculation engine, Resolution allows users to easily model
any venue and visualize a wide variety of array designs to determine what particular array
configuration is best suited to the venue.
Users simply need to define the array position, allowable trim, minimum clearance, and quantity of
modules available and use the Array Assistant to determine the optimal array configuration for a given
venue. In many situations no further prediction work will be necessary for optimal results. Users can
also adjust the results after running the Array Assistant by manually adding/removing modules or
adjusting coverage and observing changes in predicted results. In this way Adaptive arrays can be
optimized for any application.
Additionally, Resolution interfaces directly with Adaptive Systems via the Dante protocol, allowing
users to easily upload the processing parameters for their system directly from their model to the
physical array, adjust equalization and coverage, and monitor all Adaptive components in real time. No
additional software is necessary to use Adaptive systems.
Please visit www.eaw.com to download the latest version of Resolution.
9
How Array Length Affects Directivity
It would be beyond the scope of this guide to go into the physics of how line arrays behave. Regarding
vertical directivity, Anya and Anna behave similarly to any true line source. The difference with
Adaptive products is their ability to define that directivity dynamically and across the entire audible
spectrum.
The key to directivity is array length. This should not be confused with the number of drivers. A
properly designed line array system will exhibit the same directivity from the same physical length
regardless of whether this length is made up of 8”, 10”, 12” or 15” components. The determining
factor is the length of the array itself and how that length affects the wavelength being produced.
The samples below show three array types in the same venue. The first array is very short with only 4 x
Anya modules being deployed. The contour line feature in Resolution has been used to clearly show
the definition of the vertical contour at 125Hz. It is clear that with this array length, the 125Hz
frequency is seeing only slight directivity control.
The second image demonstrates what would happen with the same frequency in the same venue but
with an Anya array of 12 modules instead of 4. It is quite clear how much more directive the vertical
has become in this image and if we continue to add modules to the array, the effect will become more
pronounced.
10
Loading...