Eaton WBSD-010M-C1 Technical Data

Technical Data

December 2018

0-10V Preset Slide Dimmer

Catalog# Prepared by

Project Date

Comments Type

WBSD-010M-C1

WBSD-010M-C1

Description

1200VA, 120/277 Volt AC 60Hz, Single-Pole & 3-Way, WBSD-010M-C1
Preset Electro-Mechanical Electronic 0-10VDC Fluorescent Slide
Dimmer, 0-10VDC LED Power Supply Dimmer, Suitable for use with
Class 1 or Class 2 wiring - White face assembled on device, Ivory and
Light Almond color change kits included.

The WBSD-010M-C1 can control a load directly or connect to the
SP20-RD4 as a manual pushbutton to toggle the load.

Features

•

Controls 0-10V Fluorescent and LED loads

•

Single pole and 3-way wiring

•

Class 1 or Class 2 wiring capabilities

•

Works with the SP20-RD4 or directly controls the load

•

Color change kit included (White, Ivory, Light Almond)

•

Wallplate ordered separately

Specification

Power

120VAC, 1200VA, 60Hz

277VAC, 1500VA, 60Hz

10A LED @ 120/277VAC, 60Hz

0-10VDC: 28mA Sink Capacity

Operating Environment

Temperature: 32°F to 131°F (0ºC to 55ºC)

Relative humidity, non-condensing 20% to 90%

For dry location only

Construction Case

Injection molded housing resin complies with

UL 94V-2

Connections: Screw terminals

Size

Standard decorator opening

Technical Data

Effective December 2018

0-10V Preset Slide Dimmer

Operation

Lights turn ON to the brightness level set by the dimmers slide control lever. Lighting can be turned on from either the dimmer or a switch
location if used in a three way installation.

Note: DLC-PD-DIM can be added to this configuration to provide continuous daylighting of the 0-10V loads. The device with the lowest 0-10V
value will hold the lighting at that level.

2

EATON www.eaton.com/lighting

Compliances, specifications and availability are subject to change without notice.