Eaton 9155 User Manual

Powerware series

Eaton 9155 UPS

8-15 kVA

Product Introduction

Product Snapshot

Technology:

Power Rating:

Input Voltage:

Output Voltage:

Frequency:

Dimensions:

Configuration:

Battery Backup:

Split-phase double-conversion
online UPS

8 kVA, 10 kVA, 12 kVA and 15 kVA
at 0.9 power factor

200–240 Vac with Neutral or with
optional input isolation transformer

100/200, 110/220, 120/240 Vac 180°
phase displacement; 120/208,
127/220 Vac 120°
phase displacement

50/60 Hz auto-sensing

32.2” H x 12” W x 32.5” D

Small-footprint tower, black

Up to 29 minutes typical, extendable up
to four hours (See battery backup charts)

9155 8-15 kVA

Reliability and efficiency have never looked so attractive.
The 9155 single-phase Uninterruptible Power System (UPS)
delivers a combination of advanced technology, user­friendly design and low price that's absolutely unmatched
by competing products. This innovative design offers high
efficiency (90 percent or better across all load ranges), low
input current distortion (less than 5 percent total harmonic
distortion, with an active IGBT rectifier that delivers 0.99
power factor correction) and high power factor output
(0.9 PF).

With advances being made in miniaturization and processing
power and more equipment being served by dual-cord
power supplies, the challenge of protecting that power, and
doing so in a limited space, grows ever greater.

Fortunately, advances in technology have also meant
that more power protection per square foot can now be
provided. The 9155 delivers premium levels of efficiency,
reliability and flexibility, all in a sleek tower half the size of
most other units on the market today.

Features of the Eaton 9155 UPS

• A true online, double-conversion topology protects

connected equipment from all nine of the most common
power problems

• Delivers maximum power density in a compact tower

design: 12” wide and 33” deep, including batteries

• Provides more real power in less space (5,500 watts per

square foot) with a 0.9 output power factor – protecting
more equipment for every utility dollar and leaving more
room for expansion of the data center

®

• Patented Powerware Hot Sync

modules delivers extra capacity or redundancy

• Customizable output distribution provides user-specied

power outlets along with terminals for connecting hard­wired equipment

• Microprocessor-controlled ABM

increases battery life

• Provides a 0.99 input power factor and generator friendly

<5% total harmonic distortion using an active IGBT
rectifier to control the input power factor

paralleling of multiple

®

technology significantly

2 EATON CORPORATION 9155 UPS

• Ensures data and system integrity with complete

power management software for remote monitoring,
management and shutdown

• An Eaton factory limited warranty, technical support and

optional service plans provide investment protection and
peace of mind

Premium power protection is now easier
than ever.

Scalable architecture meets current and
future load requirements.

With raised-floor real estate at a premium, you’ll appreciate
that the 9155 requires only three to six square feet of floor
space, including internal batteries. Such a small footprint
gives you more location options and more space available
for future expansion.

Equipment installation is inexpensive and easy – essentially
plug-and-play. You can order 9155 models with your choice
of more than 19 types of output receptacles. To rearrange
or add data center equipment, you simply unplug from the
old receptacle and plug into a new one – no need for an
electrician to run new conduit and wiring.

Inside view of 9155 Parallel

Powerware Hot Sync Redundant/Capacity

Cabinet Maintenance Bypass

9155 UPS Parallel Cabinet

Load

Eaton 9155 UPSs are available in four models: 8, 10, 12

and 15 kVA, so you can choose the conguration that most

closely meets your own capacity requirements and price

point. And you can scale from there. Using our signature
Hot Sync paralleling technology, up to three 9155 modules
can be paralleled for extra capacity or redundancy. A 15
kVA UPS, for example, can grow to support loads of up to
45 kVA. There's no dependence on communications wiring

among these modules, enhancing reliability and simplifying
installation. This paralleling capability Is far more easily
achieved than is the case with competitors' products.

Battery innovations optimize battery performance and service life.

Standard internal batteries provide power until auxiliary power takes over or systems
are gracefully shut down. Battery runtime can be extended to hours by adding matching

Extended Battery Modules (EBM).

Eaton 9155 8-15 kVA UPS Backup Times (In Minutes)

UPS

VA Watt

15000 13500 4.6 23.0 43.0 65.1 88.6 13.3 43.0 76.7 113

14500 13050 4.9 24.1 45.2 68.3 93.0 14.1 45.2 80.5 119

14000 12600 5.2 25.2 47.3 71.5 97.4 14.9 47.3 84.2 125

13500 12150 5.5 26.4 49.4 74.7 102 15.8 49.4 88.1 130

13000 11700 5.8 27.6 51.6 78.1 106 16.7 51.6 92.0 136

12500 11250 6.1 28.8 54.0 81.6 111 17.6 54.0 96.2 142

12000 10800 6.5 30.2 56.5 85.5 116 18.6 56.5 101 149

11500 10350 6.9 31.6 59.3 89.7 122 19.2 59.3 106 156

11000 9900 7.3 33.3 62.4 94.4 129 20.2 62.4 111 164

10500 9450 7.8 35.1 65.9 99.6 136 21.4 65.9 117 174

10000 9000 8.4 37.2 69.8 106 144 22.6 69.8 124 184

9500 8550 9.1 39.6 74.2 112 153 24.1 74.2 132 196

9000 8100 9.9 42.3 79.4 120 163 25.7 79.4 141 209

8500 7650 10.8 45.5 85.2 129 175 27.6 85.2 152 225

8000 7200 11.9 49.1 91.9 139 189 29.8 91.9 164 242

+ Internal
32 Battery

(1)

EBM

64

(2)

EBM

64

(3)

EBM

64

(4)

EBM

64

UPS
+ Internal
64 Battery

(1)

EBM

96

(2)

EBM

96

Eaton 9155 8-15 kVA UPS Backup Times (In Minutes)

(3)

EBM

96

VA Watt

7500 6750 13.1 53.2 99.7 151 205 32.3 99.7 178 263

7000 6300 14.6 58.0 109 164 224 35.2 109 194 286

6500 5850 16.3 63.5 119 180 245 38.6 119 212 314

6000 5400 18.4 70.0 131 198 270 42.5 131 234 346

5500 4950 20.1 77.6 145 220 300 47.2 145 259 383

5000 4500 22.4 86.6 162 245 334 52.6 162 289 428

4500 4050 25.2 97.4 182 276 376 59.2 182 325 -

4000 3600 28.6 110 207 313 426 67.1 207 369 -

3500 3150 32.8 127 238 359 - 77.0 238 423 -

3000 2700 38.3 148 277 418 - 89.7 277 - -

2500 2250 45.6 176 329 - - 107 329 - -

Note: Backup times are approximate and may vary with equipment, configuration, battery age,

temperature, etc.

UPS
+ Internal
32 Battery

(1)

EBM

64

(2)

EBM

64

(3)

EBM

64

(4)

EBM

64

UPS
+ Internal
64 Battery

(1)

EBM

96

(2)

EBM

96

(3)

EBM

96

www.ea to n. co m/ 9155 1.800.356.5794 3

Options & service

Additional 9155 options

Wall-mount maintenance bypass panels

Eaton offers a comprehensive line of optional wall-mounted
maintenance bypass panels compatible with the 9155 UPS.
The wall-mounted bypass panel is used to bypass the UPS
during maintenance or servicing, providing wrap-around
bypass for UPS service without shutting down the load.

And for more exible power distribution, these maintenance

bypass panels can be equipped with surge protection
and provisions for 36 poles of distribution utilizing Eaton's

Cutler-Hammer

®

breakers.

Proven warranty and support services

Customers consistently rank Eaton services number one

in quality. Eaton’s comprehensive, world-class service
solutions are designed to improve costs, uptime, reliability,

power quality and safety. And with 240 customer service
engineers in North America and 1,200 international

authorized service providers, Eaton has more service
personnel than any other UPS manufacturer.

The standard factory warranty covers:

• System warranty: Two year parts / 90 days labor

Extensive service options for
enhanced reliability

For support beyond the warranty period, Eaton offers
enhanced service options including onsite startup,
corrective and preventive maintenance, battery solutions,
training, remote monitoring and factory spare parts

and upgrades. Customizable three-phase UPS services

packages allow customers to select the plan that provides
the right combination of system uptime, convenience and
value.

• Battery warranty: Two years parts / 90 days labor

Service Plans

Features Service Plans

Comprehensive coverage of the UPS and batteries

Telephone technical Support

Connectivity support

Expedited delivery of replacement parts, modules and batteries

On-site startup

On-site corrective maintenance

Next-day 24-hr response

Factory

Warranty

4 4 4

4 4 4

4 4 4

On-Site

Gold

4 4

4 4

4 4

4 4

On-Site Gold

Plus

UPS preventative maintenance

Battery preventative maintenance

4 EATON CORPORATION 9155 UPS

4

4

Connectivity & manageability

Enhanced communication capabilities

The 9155 UPS is equipped with a variety of standard
communications features for network connectivity and
remote management applications, including:

• RS-232 serial port

®

• Two X-Slot

communication bays

• Relay output contacts

• Two programmable signal inputs

• Remote emergency power-off (REPO)

Easy network connectivity and monitoring

ConnectUPS-X card

The ConnectUPS-X Web/SNMP X-Slot card connects the

9155 directly to an Ethernet network and the Internet and
enables graceful shutdown of multiple computers over the

network. The ConnectUPS-X Web/SNMP also features a

three-port switching hub.

Modbus

The Modbus card is an X-Slot device that allows

continuous, real-time monitoring of the 9155 through

a Building Management System (BMS) or industrial

automation system.

Relay interface cards

The relay interface card for the X-Slot enables remote UPS
shutdown and provides isolated dry contact Form-C relay

outputs for utility failure, low battery, UPS alarm/OK, and
on bypass.

Environmental Monitoring Probe

The environmental monitoring probe (EMP) works with
the 9155 and ConnectUPS-X card to remotely monitor

ambient temperature and relative humidity of the remote

environment. The EMP can also be congured to provide

status of two additional contact devices such as smoke
detectors or open-door sensors.

®

card

Power Xpert

®

Gateway Series cards

Power Xpert Gateway Series X-Slot cards provide
Web-enabled, real-time monitoring of UPSs, PDUs and
RPPs through standard onboard Web pages, Power Xpert

software or third-party software.

Power Xpert meters

Power Xpert meters combine state-of-the-art technology

with next-generation power diagnostics, data trending and

performance benchmarking with a twist-and-click LCD

display.

Centralized control and visibility

The 9155 UPS is shipped with the Eaton Software Suite

CD. The software suite includes the following applications,

as well as a user-friendly wizard to guide users through
software selection and installation:

• LanSafe

• Intelligent Power

®

power management software

®

Manager

• NetWatch network monitoring software

eNotify Remote Monitoring

Eaton's eNotify Remote Monitoring Service provides 24x7

real-time monitoring of the 9155 and battery systems and
alerts both service technicians and the customer when
a problem is detected. Proactive monitoring enables
technical experts to respond immediately to more than
40 alarm conditions and, in many cases, resolve issues

remotely with minimal or no downtime. Additional eNotify

benefits include:

• One-way outbound status and event e-mails for security

and reliability

• Fast diagnosis and notication of critical alarms

• Monthly customer reports including power event logs

and overall UPS and battery health summaries

ConnectUPS-X Web/

SNMP X-Slot card

Monitoring Probe

Power Xpert Gateway

Card 2000

www.ea to n. co m/ 9155 1.800.356.5794 5

LanSafe

Modbus card Relay Interface cards

®

Foreseer

Eaton 9155 at-a-glance

Model Selection Table - Eaton 9155 UPS (8–15 kVA)

Order Number1Description

K4081100000 PW9155 Model 8 - 32 Battery (2-high) 8/7.2 Hardwired See PDM chart 32.2 x 12.0 x 32.0 352

K4081200000 PW9155 Model 8 - 64 Battery (3-high) 8/7.2 Hardwired See PDM chart 47.8 x 12.0 x 32.0 590

K4081300000 PW9155 Model 8 - 32 Battery with Transformer (3-high) 8/7.2 Hardwired See PDM chart 47.8 x 12.0 x 32.0 558

K4101100000 PW9155 Model 10 - 32 Battery (2- high) 10/9 Hardwired See PDM chart 32.2 x 12.0 x 32.0 352

K4101200000 PW9155 Model 10 - 64 Battery (3- high) 10/9 Hardwired See PDM chart 47.8 x 12.0 x 32.0 590

K4101300000 PW9155 Model 10 - 32 Battery with Transformer (3-high) 10/9 Hardwired See PDM chart 47.8 x 12.0 x 32.0 558

K4121100000 PW9155 Model 12 - 32 Battery (2-high) 12/10.8 Hardwired See PDM chart 32.2 x 12.0 x 32.0 352

K4121200000 PW9155 Model 12 - 64 Battery (3-high) 12/10.8 Hardwired See PDM chart 47.8 x 12.0 x 32.0 590

K4121300000 PW9155 Model 12 - 32 Battery with Transformer (3-high) 12/10.8 Hardwired See PDM chart 47.8 x 12.0 x 32.0 558

K4151100000 PW9155 Model 15 - 32 Battery (2- high) 15/13.5 Hardwired See PDM chart 32.2 x 12.0 x 32.0 352

K4151200000 PW9155 Model 15 - 64 Battery (3- high) 15/13.5 Hardwired See PDM chart 47.8 x 12.0 x 32.0 590

K4151300000 PW9155 Model 15 - 32 Battery with Transformer. (3- high) 15/13.5 Hardwired See PDM chart 47.8 x 12.0 x 32.0 558

1. 50/60 Hz auto-sensing. All models can be used for frequency/phase conversion with de-rated 80% load. Please refer to manual for details.

2. Input voltage 200–240V with neutral or with optional input isolation transformer. Output voltages are user-selectable 100/200, 110/220,
120/240 Vac 180° phase displacement, or 120/208, 127/220 Vac 120° phase displacement.

3. Weight is installed weight; add 47 lbs (2-high models) or 50 lbs (3-high models) to determine shipping weight.

4. An input neutral is required for all configurations unless the input isolation transformer is used.

5. Depth increases to 33.7" when unit is configured with a PDM.

Power Rating2
(kVA/kW)

Input & Output
Connection4Output Receptacles

Four button graphical
LCD with backlight

Dimensions
H x W x D5 (in)

Unit
Weight3 (lb)

Front view of 3-high module
with cover off

X-Slot Communication Bay #1

REPO (normally open)

X-Slot Communication Bay #2

DB-9 Communication Port

Internal batteries on slide
out trays (field-replaceable)

Fans

Signal Input 1

Signal Input 2

REPO (normally closed)

Relay Contact

6 EATON CORPORATION 9155 UPS

Eaton 9155 Accessories

Accessories

Order Number Description

Powerware Hot Sync

124100017-001 9155 Parallel Cabinet 24.0 x 20.3 x 2.2 57.3

103004336 Powerware HotSync CAN Bridge Card - -

Notes: Up to three 9155 UPS and up to four 9355 UPS (available Fall 2005) UPSs can be paralleled with the Parallel Cabinet.

Extended Battery Module (EBM) or Cabinets (EBC)

103004192-5501 9155 and 9355 EBM 64 (2-high) 32.2 x 12.0 x 30.2 480

103004193-5501 9155 and 9355 EBM 96 (3-high) 47.8 x 12.0 x 30.2 710

Notes: up to four EBM 64 cabinets or three EBM 96 cabinets can be added to each 8-15 kVA UPS for extended runtime.

Seismic Mounting Kit

103004194-5501 Seismic Kit, Rated Zone 4, UL Tested, Performance rating based on NEBS GR-63-CORE Standard Vibration Test Fits both

Maintenance Bypass Module (MBM)

BPE20MBB1A Wall-mounted Maintenance Bypass Module for 9155 21 x 14 x 6.75 31

Eaton 9155 Parallel System Start Up

OSTUP9155P10CX 9155 8-10 kVA 2 or 3 Unit Parallel

OSTUP9155P15CX 9155 12-15 kVA 2 or 3 Unit Parallel

103004626 9155 Parallel System 2 unit upgrade kit (includes Can Bridge Cards, Procedures, and Parallel User's Guide)

103004627 9155 Parallel System 3 unit upgrade kit (includes Can Bridge Cards, Procedures, and Parallel User's Guide)

Connectivity Options

116750221-001 ConnectUPS-X Web/SNMP/xHub Card

05146288-5501 ConnectUPS-MX SNMP/Modem Card (9155 only)

1035425-5591 Modbus Card

05146508-5501 USB Card

1018460 Relay Interface Card (AS/400 Compatible)

103003055 Industrial Relay Card

116750224-001 Environmental Probe (requires ConnectUPS Web/SNMP card)

Spare Parts

106711155 9155 Spare Parts Kit "A"

Upgrades

103004195 9155 8 kVA to 9155 10 kVA

103004196 9155 12 kVA to 9155 15 kVA

Dimensions

H x W x D (in)

2- & 3-high models

Unit Weight

(lb)

136

Power Distribution Module (PDM) with Mechanical Bypass Switch

Optional Receptacle Panels Breaker Voltage Phase

(4) 5-15R 15A 120V 1

(4) 5-20R UL 20A 120V 1

(4) 6-15R 15A 208V 2

(4) 6-20R 20A 208V 2

(4) L5-15R 15A 120V 1

(2) L5-20R* 20A 120V 1

(2) L5-30R* 30A 120V 1

(2) L6-15R 15A 208V 2

(2) L6-20R* 20A 208V 2

(2) L6-30R* 30A 208V 2

(2) L14-20R* 20A 120/208V 2

(2) L14-30R* 30A 120/208V 2

Blank panel

* The combined quantity of these locking receptacle plates must not exceed four.

www.ea to n. co m/ 9155 1.800.356.5794 7

TECHNICAL SPECIFICATIONS for 10 AND 15 kVA

POWER

Ratings (kVA/Watts) 8, 10, 12 and 15 kVA at 0.9 power factor

Topology True double-conversion online UPS

Electrical Input

Nominal Input Voltage 200V-240V with neutral or with optional input transformer

Input Voltage Range -15%, +10% from nominal at 100% load without

Operating Frequency 50/60 Hz (45 to 65 Hz)

Input Power Factor P.F >0.99 typical, >0.96 frequency converter

Input Current Distortion 5% THD

ELECTRICAL OUTPUT

Nominal Output Voltage 100/200, 110/220, 120/240 Vac 180° phase displacement;

Output Voltage
Regulation

Efficiency 90% typical

BATTERY

Battery Type 9Ah, sealed, lead-acid, maintenance-free

Battery Runtime See Battery Runtime Chart

Battery Replacement Field-replaceable

Charger Default is 3.4A per battery string. Charger current is

Start-On-Battery Allows start of UPS without utility input

GENERAL

Diagnostics Full system self-test at startup

UPS Bypass Automatic on overload or UPS failure

Parallel for Redundancy
and Capacity

Dimensions and Weights See Model Selection Table

Overload 150% for 5 sec / 125% for 1 min (online), (Normal Operation)

COMMUNICATIONS

LCD Display Graphical LCD with blue backlight

LEDs (4) LEDs for notice and alarm

Audible Alarms Yes

Communication Ports (1) RS-232, (1) relay contact, (1) REPO, (2) environmental input

Communication Slot (2) X-Slot communication bays

Power Management Bundled Software Suite CD Software

depleting battery

120/208, 127/220 Vac 120° phase displacement

±1% Static; ±5% dynamic at 100% resistive load change,
<1 ms response time

configurable from 0.5A to 25A per string with an overall
maximum of 34A (limited by input current)

Yes, using Powerware Hot Sync technology

110% for 10 min

ENVIRONMENTAL

Operating Temperature 10ºC to +40ºC, +45ºC with 7.5% derating;

Batteries recommended max. +25ºC

Storage Temperature -15ºC to +25ºC

Relative Humidity 0–95%, non-condensing

Audible Noise Audible Noise: < 53 dBA at 1 meter (noise less room) typical

Altitude < 1000m at +40°C, < 3000m at +25°C

CERTIFICATIONS

Safety Certifications NOM-0190SCFI-1993, UL 1778, CSA C22.2, No. 107.3;

EN 5502 Class A (CISPR22 Class A) and IEC 60950;
IEC 62040-1-1

EMC Compliance IEC 62040-2, FCC Part 15, ICES-003, VCCI

Quality ISO 9001: 2000 and ISO 14001:1996

Markings UL, cUL, CSA, CE and NOM-NYCE

1. Due to continuous product improvements, program specifications are subject to change without notice.

UNITED STATES
8609 Six Forks Road
Raleigh, NC 27615 U.S.A.
Toll Free: 1.800.356.5794

www.eaton.com/powerquality

CANADA
Ontario: 416.798.0112
Toll free: 1.800.461.9166

LATIN AMERICA
South Cone: 54.11.4124.4000
Brazil: 55.11.3616.8500
Andean & Caribbean:

1.949.452.9610
Mexico & Central America:

52.55.9000.5252

EUROPE/MIDDLE EAST/AFRICA
Denmark: 45.3686.7910
Finland: 358.94.52.661
France: 33.1.6012.7400
Germany: 49.0.7841.604.0
Italy: 39.02.66.04.05.40
Norway: 47.23.03.65.50
Portugal: 55.11.3616.8500
Sweden: 46.8.598.940.00
United Kingdom: 44.1753.608.700

ASIA PACIFIC
Australia: 61.2.9693.9366
New Zealand: 64.0.3.343.3314
China: 86.21.6361.5599
HK/Korea/Taiwan: 852.2745.6682
India: 91.11.4223.2300
Singapore/SEA: 65.6825.1668

Eaton, PowerChain Management, ABM,
ConnectUPS, LanSafe, PowerVision,
Powerware Hot Sync, and X-Slot are trade
names, trademarks and/or service marks
of Eaton Corporation or its subsidiaries and
affiliates. All other trademarks are property
of their respective owners.

©2010 Eaton Corporation
All Rights Reserved
Printed in USA
9155FXA
April 2010