Eaton 5SC750i Product Data Sheet

Datasheet Eaton 5SC UPS 500-1500 VA

Eaton 5SC UPS

500/750/1000/1500VA

5SC Range

Affordable and reliable protection for small business servers

Easily manageable UPS

• The new LCD interface provides clear status of the UPS key
parameters such as input and output voltage, load and battery
level, and estimated runtime. Configuration capabilities are
also offered for output voltage, audible alarm and sensitivity.

• The 5SC offers USB and serial connectivity. USB port is HID
compliant for automatic integration into Windows, Mac OS
and Linux.

• Eaton Intelligent Power Protector ® (IPP) software delivered
as standard, can be used as point to point power management
(USB/Serial) or Network based using IPP as a proxy.

Reliable power protection

• Pure sinewave output: When operating in battery mode the
5SC provides a high quality output signal for any sensitive
equipment connected, such as active PFC (power factor
corrected) servers.

LCD interface

Ideal for protecting:

• Tower Servers

• NAS, Network equipment

• ATMs, Ticket machines, Kiosks

• Buck and Boost operation corrects a wide range of input
voltage variations through continuous regulation, without the
use of batteries, and ensures consistent input voltage to the
loads protected.

• Stronger, longer battery life: Eaton ABM® battery
management technology uses an innovative three-stage
charging system that extends battery life by up to 50%.

Flexible integration

• Small size for easy integration even with space constraints
(kiosks, cash machines, ticket machines etc.) and up to eight
outlets for better flexibility!

• Adjustable input waveform sensitivity to adapt the UPS to
specific environment (like Genset).

• Easy battery replacement from front panel to extend UPS life.

Eaton 5SC UPS

1 LCD Interface :

Clear information on
UPS status and measurements

1

2

3

Panel for batteries

2

replacement

3 1 USB port + 1 serial port

4 8 IEC 10A sockets

4

Eaton 5SC 1500i

TECHNICAL SPECIFICATIONS 500 750 1000 1500

Rating (VA/W) 500 VA / 350 W 750 VA / 525 W 1000 VA / 700 W 1500 VA / 1050 W
Format Tower Tower Tower Tower

Electrical Characteristics

Technology Line-Interactive High Frequency (Sinewave, Booster + Fader)
Input voltage and frequency ranges without
using batteries

184V–276V, 45–55Hz (50Hz system), 55–65Hz (60Hz system)

Output voltage and frequency 230V (+6/–10 %) (Adjustable to 220V/230V/240V), 50/60Hz +/–0.1 % (autosensing)

Connections

Input 1 IEC C14 (10A)
Outputs 4 IEC C13 (10A) 6 IEC C13 (10A) 8 IEC C13 (10A) 8 IEC C13 (10A)

Batteries

Typical backup times at 50 and 70% load*

13/9 13/9 13/9 13/9

Battery management ABM®, Automatic battery test, deep discharge protection

Communication

Communication ports 1 USB port + 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously)

Operating conditions, Standards and Approvals

Operating temperature 0–35°C 0–35°C 0–35°C 0–35°C

Noise level <40dB <40dB <40dB <40dB

Safety IEC/EN 62040-1, UL 1778

EMC, Performance IEC/EN 62040-2

Approvals CE, CB report (TUV)

Dimensions H x W x D / Weight

Dimensions 210 x 150 x 240mm 210 x 150 x 340mm 210 x 150 x 340mm 210 x 150 x 410mm
Weight 6.6kg 10.4kg 11.1kg 15.2kg

Customer Service & Support

Warranty 2 years

* Runtimes are shown at 0.7 power factor. Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.

Part Numbers 500 750 1000 1500

5SC 5SC500i 5SC750i 5SC1000i 5SC1500i

In the interests of continuous product improvement, all specifications are subject to change without notice.

© 2013 Eaton Corporation
All Rights Reserved
5SC01DAT Rev A,
June 2013

Eaton is a registered trademark
of Eaton Corporation.

All other trademarks are property
of their respective owners.www.eaton.eu/5SC