Easyrig Mini User Manual

Page 1
Congratulations on your new Easyrig Mini
The Easyrig Mini is made by Easyrig for cameras up to 4 kg (9 lbs) or 4–6 kg (9-13 lbs). Specially designed by a cameraman for serious photographers. The Easyrig Mini is manufactered in Sweden and has been ergonomically tested with optimal results. The Easyrig Mini will be your best tool when you do reports, documentaries, commer­cials, news, sport events, yes, any occasion where handheld camera is required. The Easyrig Mini gives the advantages of both handheld camera and tripod camera; i.e. with the speed and mobility of the handheld camera you can still achieve steady pictures. The Easyrig Mini relieves your back and shoulders. The load is redistributed to the hips so that you can concentrate on the actual filming. You won’t suffer from a strained back or shoulders as you would from normal handheld shooting and you will be able to work or longer periods of time. With The Easyrig Mini you will be rock steady!
Please send us the warranty card.
HAVE FUN !
Johan Hellsten Cameraman/Inventor Easyrig AB
Page 2
Open the knob
To adjust the
hook
to adjust the
support bar.
How to fold the
To release
spring
arm correctly
into the bag.
To tighten the
spring
Page 3
Easyrig Mini Warranty Information card
Please mail within 30 days of purchase.
Manufacturers products are warranted to be free from defects caused by faulty materials or workmanship for a period of two years from the date of purchase. The liability of the Manufacturer under this warranty is limited to repairing, replacing, or at its option issuing credit for any of its products which are returned by the purchaser during such pe­riod provided, however, that:
A. Warranty card is properly filled out and returned to Manufacturer
within 30 days of purchase.
B. Warranty is valid when the used camera weight less then 4 kg
(9 lbs). or 4–6 kg (9–13 lbs) (depending on model of purchase) is not exceeded by the camera/equipment used.
C. That such defects exist and have not been caused by abuse, mis-
use, neglect, improper installation or assembly, repair, alteration or accident.
D. Defective merchandise is returned to manufacturer accompanied
by a report of findings indicating the basis of/for rejection and with transportation charges paid by the puchaser.
In no event shall Manufacturer be liable for collateral or consequential damages of any nature. This warranty is in lieu of all other warranties expressed or implied.
Name _________________________ Title ____________________________
Company ______________________________________________________
Address ________________________________________________________
City __________________________ Postal code ______________________
Country _______________________
Phone: _______________________ Fax: _____________________________
e-mail: _________________________________________________________
Purchase location/company: _______________________________________
Serial number: _________________
Page 4
Stamp
Easyrig AB
Anumark 231
905 95 Umeå
Sweden
Send us your opinion/Comments
Loading...