
PhoTags Express software Installation CD
User’s manual
Strap
Computer System Requirements for Windows 2000/XP
To be able to download photos to your PC, you will need the following minimum configuration:
Pentium process or above with windows 2000, XP
64 MB RAM, more than 250MB free disk space
Available USB interface
CD-ROM Drive
Recommended screen resolution 24 bit or higher
256 color or higher display adaptor
Computer System Requirements for Windows Vista/Win7
To be able to download photos to your PC your will need the following minimum configuration:
Windows Vista/Win7
800MHz processor and 512 MB of system memory
20GB hard driver with at least 15GB of available space
Support for Super VGA graphics
Available USB Interface
CD-ROM drive
Computer System Requirements for Macintosh
Power Macintosh G3 500 MHz or higher
Mac OS X version 10.2.6 or later
128 MB or more available system RAM (256 MB recommended), 150 MB free disk space
800 x 600 or higher-resolution monitor displaying millions of colors
Note: This hardware is plug and play compatible when used on a Mac, however, the included
software can be used on Windows operating systems only.
Waterproof Notice
Please read this manual carefully before using the camera, and pay attention to the following
notice.
This symbol indicates that violating this item can cause the serious personal
Injury, or material loss.
This symbol indicates that violating this item can cause the minor or medium
2

personal injury, or material loss.
Operation:
•Please don’t attempt to take apart the camera. The high voltage parts are present within
the camera. If you take apart the camera, there will be dangerous electric shocks.
•If the internal camera parts are exposed as a result of being dropped, please don’t touch
Any exposed portion by hands. Otherwise, there is a danger of receiving and electric
shock.
•Please don’t expose the camera under the sunshine or the places of high temperature. It
may cause any damage on the internal parts or battery, even result in the explosion.
•Keep the memory card out of the reach of children in order to avoid any risk of it being swallowed
by the mistake.
•If there is smoke or strange sounds emitting from the camera, please stop using it, and also
remove the battery immediately. Please send back the camera to the retailer for repair.
•Please don’t place your camera at high temperature and humidity environment.
•Before using the camera underwater, please install the battery and memory card first, and make
sure all covers are securely locked. Please also test this camera in water in advance, and make
sure there is no water getting inside.
• If you find the water gets inside the camera, please turn off the power, and go away the water
immediately.
•If the moisture appears on the lens during the use, it may be leaking. Please remove the battery
and memory card, and then send back this camera to the retailer for repair immediately.
•Please don’t open the battery door when using underwater. This is to avoid the water getting
inside the camera, and an electric shock occurring.
•If it becomes hot during the use, please turn off the power and remove the battery immediately.
•This camera is waterproof and dustproof. Please don’t take apart this camera by yourself. This
action may cause any damage on the camera. If this damage is caused, the user needs to take
the responsibility for repair.
3

•Please don’t use the camera at the environment of higher or lower temperature for a long time.
•Should the LCD panel be damaged, please don’t use it underwater. To avoid any personal injury,
please send back this camera to the retailer for repair immediately.
•This camera is 3 meters waterproof, and please do not use this camera over the depth.
•After using this camera underwater, please clean it with fresh water, and wipe it with clean cloth.
Then, you can open the battery cover to remove the battery or memory card, and have the camera
body dry automatically.
•If you don’t use the camera, please remove the memory card and battery.
Waterproof and Dustproof
•Be sure to attach the strap and slip it over your wrist when using the camera.
•Please don’t subject this camera to a strong shock or pressure. It can cause a loss in waterproof
and dustproof performance.
•Before using the camera underwater, please be sure to close battery door completely.
•When using the camera underwater, please don’t open the battery door. It will cause leaking.
•When replacing the battery or memory card, please wipe off any dirt or sand, and rinse the camera
with fresh water, or leave it in a bowl of fresh water for 2 or 3 minutes. Then, wipe the camera with
a clear cloth. Please make sure the camera is clear and dry. This is to avoid any substance or
water getting inside the camera when you replace the battery or memory card.
*** Please don’t open the battery door at the beach or by the sea, and also avoid replacing
the battery or memory card where the camera is likely to get wet or dirty, and make sure
your hands are dry.
•After using the camera underwater, please make sure it is power off, and the battery and USB
covers are firmly closed. Please wipe off any dirty or sand, and rinse the camera with fresh water,
or leave it in a bowl of fresh water for 2 or 3 minutes. Then, wipe the camera with a clear cloth.
After cleaning this camera, please remove the battery and memory card. Afterward, please leave
the camera in a bowl of fresh water for 30 minutes again. Finally, please dry this camera with a
clean cloth, and store it in a safe place.
•Avoiding using any soap water, mild detergents, or alcohol to clear the camera, it may affect the
waterproof and dustproof performance
A Quick Look at Your Camera
4

Battery Installation
Your camera requires 2 AAA batteries. Insert the battery into the camera as following description:
1.Open
the Lock
and slide
the cover
2.pull inside
battery cover
3. Install batteries according to the indication
5