EasyPix V130 Instruction Manual
Manual
1. Get to know your camera
1.1 Features
1.3 Mega pixels resolution sensor
Video clips
Web camera
1.3" CSTN display
Internal 16MB memory
Driver free for Windows XP/Vista and MAC 9.x and X.x
1.2 Specifications
Sensor 1.3 Mega pixel CMOS sensor
5 Mega pixels: (2560 x 1920) (Hardware Interpolation)
Image resolution
Lens F/2.8 f=8.5mm
Focus range 0.5m. ~ Infinity
Digital zoom 4x
LCD display 1.3" color CSTN
Video mode UP to 30fps@QVGA & 20fps@VGA
Built-in memory 16MB flash memory
Picture Capacity in
16M memory (The
quantity of pictures
varies and depends
on the complexity of
the scene)
3 Mega pixels: (2048x1536) (Hardware Interpolation)
1.3 Mega pixels: (1280x960)
VGA Mega pixels: (640x480)
5 M：(2560 x 1920)----15-35 Pictures
3 M：(2048x1536)----- 20-50 Pictures
1.3 M：(1280x960)----40-100 Pictures
VGA: (640x480)-----120-260 Pictures
1
Power on/off
Shutter / OK
2
button
3
Zoom button Digital zoom in
4
Mode/Set button
5
Next button
6
Playback button
7
Smile button
8
Lens
9
Battery door
10
Strap hook
11
LCD screen
12
SD card slot
13
Speaker
14
USB interface
15
Battery cover Lock
3. See following details to setting your digital
camera
File format Picture: JPEG, Video: AVI
Self timer 10 seconds
PC interface USB 1.1
Self-timer shot
Power source 2xAAA alkaline batteries
1.3 System requirement:
Operating System
CPU Pentium II or above
Windows XP/Vista or above
Mac 9.x or X. x
SET
Photo
Default setting
Light-
Frequency
RAM At least 64MB
Interface USB port
CD 4x speed CD ROM or above
USB connection
2. Functional parts
Video
Resolution
Turn on when slide to ON position, Turn off when, slide to OFF
position.
Press this button to take photographs or to start/stop
recording a short video clip. This button can be also used to
confirm changes.
Select DSC / Video recording mode by press this button.
Press and hold 2s this button to enter setup mode. Press this
button to wake up when device turns to sleep status.
Next and down selection.
Press this button to change mode between playback and preview
mode.
Press this button to send out “smile” sound.
Records the image to be taken.
Note: Keep the lens clean. Dirt and fingerprints affect the
outcome of the picture.
2xAAA alkaline batteries
Hook for attaching the wrist strap to the camera.
View photographs and video clips, view camera setting and
menu.
SD card slot
For sound output.
Via this connection, you can save photographs and video
clips to a computer, or use the camera as a PC cam to chat
on the Internet.
Slid this button to lock or release battery cover.
Resolution
5M, 3M, 1.3M,VGA Set the picture resolution.
10s Set the self timer to/10S.
Load Restore default setting.
50Hz
60Hz
Mass-storage mode
PC-Camera mode
VGA, QVGA
Main European electricity
Frequency.
Main American electricity
Frequency.
Work as are movable disk.
Work as are web camera.
Level of pixel resolution.
Delete
Playback
Format storage
Note: The camera will remain the last setting when it is turned off.
Delete One (Default)
Format storage Format the memory card.
Delete the picture or video you
selected.
4. Explanation of the status icons on the LCD
screen
Item Function Description
The batteries are full.
1
Battery indicator
2
Recording mode
Camera resolution
3
Photo / Video counter
4
Memory or SD card
5
indicator
The batteries are empty.
Setting for taking photographs
Setting for recording videos
Displays the resolution.
5M=2560x1920;
3M = 2048x1536;
1.3 M=1280x960;
VGA=640x480;
QVGA=320 x 240
Photo mode :Photo No. have, been taken.
Video mode: Video recording time in second;
Playback mode: current number. of pictures or video
clips
Indicates memory or SD card.
: Pictures stored in built-in memory.
: Pictures stored in SD card.
5. Using the camera
5.1 Installing the batteries
1. Open the battery door.
2. Insert 2 AAA alkaline batteries into the camera according to the correct polarity marked in
the battery compartment.
3. Turn on the camera
Slide the power to activate. Slide it again to turn this Digital Camera off.
5.2 Inserting a memory card (not included)
This camera has built-in internal memory. This memory can be extended with a SD memory card
(not included).
Follow the instructions given below to insert the optional SD memory card into the camera.
1. Open the camera’s battery door by sliding it downwards.
2. Insert the SD card into the slot.
3. Press the SD card completely into the camera and then close the door. Open the door and
press on the memory card if you wish to remove it.
Note: There is only one right direction to insert the SD memory card into the slot. Do not force the
card into the slot, or else it may damage both the camera and the SD memory card.
Note: The SD memory card must be formatted before taking photographs. See the following
sections for more information.
5.3 Setting your camera
In the mode you can set all the option of you camera;
1. Press MODE to select the mode (picture or video) you want to set;
2. Press MODE and hold it to enter system setting menu;
3. Select what you want to set by NEXT, and press OK to confirm;
4. Set the option you selected by NEXT, and press OK again to confirm;
5. Press MODE to exit.
5.4 Taking photographs
1. Slide the power ON/OFF to activate your Digital Camera.
2. Set the camera to photo mode (
3. Use the LCD screen to aim the object you wish to photograph.
4. Press Shutter button and hold the camera steadily for 2 to 3 sec, until the LCD display turn
on again.
5. You can press and hold MODE to set proper resolution, Self-time shot and so on, and
press shutter to confirm, and press and hold MODE again to return.
Note: If you take photographs with the default camera settings, it is possible that the quality of the
photographs will not always be optimal. Different surroundings produce different results.
Adjust the camera settings as required.
).
5.5 Zoom in and out
The camera can zoom in up to 4 times in preview mode by pressing ZOOM (1x-4x-1x), and you
can also use it to zoom in/out photographs in playback mode.
5.6 Taking photographs using self-timer function
You can use the self-timer function when you wish to take a photograph of yourself or when you
wish to photograph an object where the camera must be as still as possible, for example on the
stand.
1. Set the camera to photo mode (
2. Press and hold the MODE button. The quick menu will appear.
3. Press NEXT to select self-timer mode, and press OK to confirm
4. Setting the time with NEXT button(10S), and press OK to confirm
5. Press MODE to complete your setting. The self-timer function is now ready for use, and the
ICON will be shown on the top of the LCD.
6. Aim the object you wish to photograph.
7. Press the shutter button to take a photograph.
8. The photograph will be taken after the time delay you set, and the camera will beep once.
).
5.7 Recording video clips
1. Press the MODE button to select video mode ( ),
2. Press the shutter button to start recording video, press the shutter button again for a pause.
The video clip will now be saved as an AVI file in the camera memory.
3. You can press and hold MODE to set proper resolution, and press shutter to confirm.
5.8 Playback photographs or video clips
1. Press Playback button , it will show video clips or photos picture on the LCD
2. Press NEXT to review next the photo or video clip.
3. Press MODE again to exit the Playback mode.
Note: The video clip will auto run if you select it until you select others.
5.9 Delete photographs and video clips
You can choose to delete a single photograph / video clip, or Format the memory.
Follow the instructions given below to delete photograph/video clips.
1. Press playback button, enter playback mode.
2. Select the photo or video clip you want to delete with NEXT key;
3. Press and hold MODE button to enter the menu,
4. Select Delete one
5. Select √ and press OK to confirm again, you will exit the menu.
6. You can also press and hold MODE to exit.
NOTE: ‘Format memory ’, the files in camera will be deleted all.
/ Format memory with NEXT key, Press OK to confirm.
6. Press the smile button to send out “smile”
sound before taking photo
7. Installing the camera driver
The driver in the CD has to be installed for windows ME, Windows 2000, Windows XP Windows
Vista to use as a PC cam only. (Download picture /video is driver free).
7.1 Uninstalling old drivers and devices
There is a chance for a conflict between the new driver and an existing driver in the computer. In
that case, it is better to remove those drivers before installing the new driver.
1. Enter Windows ‘Safe Mode’ (press F8 when starting Windows and then select ‘Safe Mode’
from the menu which will be displayed).
2. Click on ‘Start – Settings – Control Panel’ and double-click on ‘Add/Remove Programs’
icon.
3. Find all the programs for similar, old devices and remove these by clicking on the
‘Add/Remove’ button. When in ‘Safe Mode’, it is possible for some programs to appear
twice. In that case, remove all the programs which appear twice.
4. Restart the computer.
7.2 Installing the driver for Windows XP/ Windows Vista
Note: Make sure all other programs are closed during the installation process.
Note: During installation for Windows XP, you may receive a message saying that the driver has
not been signed. This does not cause a problem for the functionality of the program. Please
click "Yes" to continue.
Note: For example, ‘D: \’ is used to indicate the CD-ROM drive. This may be different for your
computer.
1. Insert the CD-ROM into your computer’s CD-ROM drive. The installation program will start
automatically. If it does not start automatically, please do the following:
a) Select 'Run' from Windows Start menu.
b) Type [D:\SETUP.EXE] and click on 'OK' to start the Software Installer.
2. The Software Installer will appear.
3. Select the language you wish to use for the installation.
4. Click on ‘Install driver to start the installation of the camera driver.
5. Follow the on-screen instructions.
7.3 Connecting the camera
The camera can be connected to the computer in two different modes: mass storage device and
PC camera.
7.3.1 Connecting as a mass storage device
This option makes it possible to download photographs and video clips onto your computer.
1. Slide the power ON/OFF switch to activate your Digital Camera.
2. Press and hold MODE button to enter system setting menu.
3. Press NEXT button to select USB connection, and press OK to confirm.
4. Press NEXT button to choose the mass storage mode.
5. Press OK to confirm.
6. Connect the camera to the computer.
7. Windows will automatically detect the camera. You can use this camera as a removable
disk.
7.3.2 Connecting as a PC camera
When you connect the camera as a PC camera, you can use the camera as a web cam for video
conferencing on the Internet by using Windows NetMeeting or Windows Messenger.
(You must install the driver before connecting the Digital Camera to your computer).
1. Slide the power ON/OFF switch to activate your Digital Camera.
2. Press and hold MODE button to enter system setting menu.
3. Press NEXT button to select USB connection, and press OK to confirm.
4. Press NEXT button to choose the PC Camera mode.
5. Press OK to confirm
6. Connect the camera to the computer.
7. Windows will automatically detect the camera. You can use this camera as a web camera.
8. Trouble shooting
Problem Cause Solution
Cannot turn on the
camera by pressing the
“power” button.
Photos are not saved or
are missing when taking
pictures.
Cannot find removable
disk after connecting the
camera to the computer
via USB
The photos are blurry
Get a warning message:
“Capture device was not
detected” when trying to
open PC cam.
.
Low battery power, battery
is missing or incorrectly
inserted the battery.
The built-in memory hasn’t
been formatted properly in
the camera.
1. Connection failure.
2. The mode of the camera
is not set to removable
disk properly
1. The camera is not held
steadily
2. The lens of camera is
dirty
1. Conflict with another
camera or capture
device.
2. The mode of the camera
is not set to PC cam
mode properly.
Install or replace the battery
correctly.
Format the memory in system set
mode of the camera. Please refer
to section 5.4.
1. Make sure all cable connections
are secured and restart the
computer.
2. Set the camera to removable;
refer to section 7.3.1 (system
setting, USB connection).
1. Hold the camera steadily until it
2. Clean the lens with soft dry
1. Remove any other camera
driver completely from your
system. Sometimes you have to
re-install your system.
2. Set the camera to PC cam
mode; refer to section 7.3.2
(system setting, USB connection).
beeps when takes photo.
cloth.
Loading...