Eastview Technology ES405 Users Manual

Wireless Earphone Universal Hands Free

Features:

1. This product is suitable for any brands of mobile phones in cars and trucks.

2. “Wireless Earphone” makes you talk privately and freely.

3. “External Speaker” has the excellent effect of voice output that you can talk publicly.

4. 180degree direction adjustable.

5. Volume control function.

6. LED power indicator.

7. LED earphone charging indicator.

8. LED earphone in use indicator.

9. On/Off button for earphone, and its charging.

Operations:

1. Insert the DC plug into the car cigarette lighter socket, and make sure the “RED LED” power
indicator is on.

2. Set the wireless earphone in position charging 10 minutes at least for the initial usage, or it
runs out of the power.

Position the earphone for charging, and make sure the “Amber LED” earphone charge
indicator is on.

3. Clip the “Microphone Clamp” onto the speaker’s mobile phone. And position the mobile
phone properly, the best distance is less than 1.0 meter from the user. The mobile phone
shouldn’t be placed too close or faced directly to the unit in order to avoid the echo.

4. For using the wireless earphone, push the button at aside of the earphone to release it from the
unit, and place it onto the ear properly. Push the button on earphone to start the function, and
make sure the “Red LED” indicator on the earphone is on.
(Note: remember to switch off the “Red Led” indicator button on earphone whenever getting
off your car in order to keep the power.)

5. Adjusting the volume on the mobile phone to comfort level for use of the earphone.

6. Adjusting the volume on the side of the unit of the midpoint after dialing. Or any level you
feel comfortable for use of the external speaker.

7. Your voice is transmitted through the microphone of your mobile phone. And your voice will
be heard clearer than directly facing it.

8. The other party’s voice will be heard through the wireless earphone, or via the external
speaker.

Specifications

Input Voltage: DC12V-24V
Output Power: 500mW–800mW
Consumption Current: 50mA- 100Ma
Effective Wireless Range: Within 2M
Generating Wireless current: 10Mw

Magnetic Phone Holder with Cell-phone Holder

ITEM MAGCAS
Features:

1. No drilling to install.

2. Strong magnet securely holds any cell-phone in place.

3. Any cell-case clip can be hold easily.

4. Holder is adjustable for the angle of up and down.

5. Square base of holder is flexible for sticking on any shape of dashboard.

6. Two pieces of oval metal attached for sticking on the back of battery pack.

7. Streamline, and smart design.

Operations:

1. Wipe the surface cleanly where you plan to mount the holder.

2. Remove the sticker from the square base of the holder. And mount it onto the dashboard.
Leave the attached holder on the dashboard for about two hours for making the full effect.

3. Remove the sticker on the back of the oval metal piece and attach it onto the back of your
phone or leather case. For your convenience there are two oval metal pieces available for
additional batteries.

4. Connecting the phone to holder, place oval metal piece into the oval opening of the magnetic
holder.

5. Releasing the phone, just push the button on the side of magnetic holder and pull the phone
up.

6. Hang the clip of the cell-phone case into the extension holder upon the magnet holder.

Note 1:
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.

NOTE2:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
NTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY
TO OPERATE THE EQUIPMENT.