Eastman Kodak C10T Users Manual

KODAK Baby

Video Accessory

Camera / C10

User guide

www.kodak.com

For help:

www.kodak.com/go/C10support

Eastman Kodak Company
Rochester, New York 14650
© Kodak, 2011

All screen images are simulated.
Kodak is a trademark of Eastman Kodak Company.

4H8795_en

What’s in the box:

C10 Camera

AC adapter with 11.8 ft (3.6 m) cord

Wall mounting accessories

Antenna

IR LEDs

Lens

Microphone

On/Off

Also included:

ENGLISH

i

ENGLISH

CAUTION:

Product warning

Strangulation Hazard–do not place the camera
in the crib or within 3 ft (1 m) of the baby.

■ You must regularly monitor your baby’s activity. This

product cannot replace responsible adult
supervision. This product will not alert parents to a
baby’s silent activities.

■ Never use extension cords with AC adapters. Use

the AC adapters provided.

■ When an AC adapter is plugged into an electrical

outlet, do not touch the exposed end.

■ Test the monitor before first use, periodically, and

when changing the location of the camera.

■ Small parts can be a choking hazard. Do not allow

children to play with the camera.

■ Install batteries correctly.

■ Remove alkaline batteries from the camera if the

camera is stored for long periods of time or when
batteries are exhausted; do not mix old and new
batteries; do not mix alkaline, standard, or
rechargeable batteries.

■ Keep all batteries away from children. Dispose of

exhausted batteries properly.

■ Do not attempt to recharge non-rechargeable

camera batteries.

ii www.kodak.com/go/support

Quick Start Up

CAUTION:

Quick Start Up

Camera

Operate the camera with the AC adapter or with
4 AA-size alkaline batteries (not provided).

1 If you choose to use AA-size alkaline batteries:

a Remove the screw on the back of the camera

with a straight-blade screwdriver, then remove
the battery door.

b Insert 4 batteries.
c Place the battery door back on the camera,

then secure with the screw.

2 Select a location for the camera with the best view

of the baby.

Strangulation Hazard–do not place the
camera in the crib or within 3 ft (1 m) of
the baby.

3 Place the camera on a flat surface, such as a dresser

or shelf. To mount the camera on a wall, see

page 2.

4 Connect the AC adapter with the cord to the back

of the camera.

5 Plug the AC adapter into a standard electrical

outlet, then secure the cord to the wall using the
mounting clips, if necessary.

6 Press the On/Off button for at least 2 seconds. The

button glows when the camera is turned on.

1