Eastern Times Technology U400 User Manual

Wireless Bluetooth Mouse User’s Guide

（BROADCOM Plan ）

Thanks for using this products, the is the latest development Bluetooth Optical Mouse.
This creative and easy-to-use Bluetooth Mouse will bring you a whole new wireless life
experience.

System Requirement

z Mouse compatible with standard Microsoft Mode.
z IBM compatible PCs running Windows Operating System which supports USB

devices.

Main Features

z Use BROADCOM 2042 Chipset with wireless Bluetooth 2.0 interface
z Use AvaGo A5030 optical IC, with 1000DPI optical resolution as minimum Features

comfortable, ergonomic design

z Unique super energy saving mode, battery life longer than similar products by 50%

to a maximum period of 6 months

z Come with particular power managing software, indicates the power capacity in

Microsoft Windows System automatically

z Support battery turn off, it will be protect the battery.
z Use the Bluetooth industry leading software solutions, WIDCOMM BTW (Microsoft

officially designated software) Bluetooth software

z Built-in software solutions with Bluetooth human interface device and comply with

the standard version of the Bluetooth SIG Bluetooth 2.0

z Work with Windows 98, ME, 2000, Server 2003, XP and Vista
z AAA alkaline battery x2
z Frequency band: 2.4 - 2.4835GHz unlicensed ISM band
z Receiving sensitivity: -75dBm (standard)

RF output power: up to 4dBm as maximum, good for your health with lowest radiates

z Operation distance: 10m
z Workable environment: 0-45°C
z Putting environment:-10-85°C
z Humidity: 20%-50%

Precaution
! The optical mouse cannot work on a glass or mirror surface. Avoid operating
this mouse on a glossy surface. Otherwise, this mouse may not operate
normally.
! For consideration of saving battery power, it is strongly recommended to
operate an optical mouse on a bright surface with fine texture to obtain lower
power consumption of the Agilest high illumination LED. A very dark surface
will cause higher power consumption.
! For a better transmission distance, avoid to use this device on a metal plate
or desktop because a large surface of iron, aluminum. Operating on a metal
may cause the transmission distance shorter.

Installation Guide

Step1. Inserting Batteries

1. Remove the battery cover by holding the mouse with the scrolling wheel towards you, and using

your thumb to push out the batter cover along the direction indicated by the bold arrow.

2. Inset two AAA alkaline batteries. (Please refer to the diagram above for the polarity of batteries).

3. Carefully slide the battery cover back in the direction opposite to that stated in procedure .

4. Please see the bottom of this mouse, the Switch must be put on the “ON” position.

and the light of the mouse bottom will be light

5. Finish the battery setup.

Step2. Connecting the Mouse to the Dongle, and drive:
If you setup the Bluetooth (Dongle) drive or connecting Dongle, please turn out this step.
Before you install the Bluetooth Mouse, please make sure that the Bluetooth Dongle has been installed.
Software available like Wincomm, IVT or the Microsoft built-in software (can not connect to the
headset).
Any plan connecting (Dongle) will be okay, e. g. BROADCOM，CSR, It will be finished setup when
connect the USB port.
Connecting the mouse to the (Dongle) drive, please refer to (Dongle) user manual