Eastern Times Technology MSEC Users manual

Chargeable Wireless Optical Mouse User

Manual

Welcome

Thank you for selecting this product! This

mouse is one kind of newly developed

wireless RF mice in our company, and it uses

the global-used frequency of 27MHz. The

comfortable and perfect shape is designed

according to somatology. With it, You can get

rid of the bondage of wires and enjoy your

beautiful life from the high technology

Product Features

1. Radio frequency 27MHz,It has 256 ID

code, there is no interference even

many mice being used at the same

time.

2. With receiver hidden inside and the

whole design looks more ntimate and

scientific.

3. Automatically save power sleeping

functions, battery life be prolonged.

4. With charge and regular circuit, it can

use the attached retraceable line to

charge for the mouse. Even if there is

no battery in the mouse, you can use

the mouse directly, thus it resolve the

problem of lack the battery.

Systems Compatibility

IBM PC and Windows Me/2000/XP

Build-in mini receiver

As bellow, press the receiver-out button,

and the receiver can spring out

automatically, at this time, mouse begin to

work. If you push the receiver back to the

transmitter, power will be cut down

automatically.

The Steps of Install Battery

1, Please prepare for two PCS new AAA

alkaline batteries

2, Press the button of the mouse upper

cover and pull the battery cover rearward

(Please see the reference picture)

3, Please insert the batteries correctly

according to the polarity marks of the

battery grooves.

4, Pull the battery covers forward, when

you hear “crack” sound which shows the

battery cover is locked successfully.。

Receiver Installation

1, please use extended cable, and put the

receiver and transmitter on one desktop,

in this way, you may have higher working

efficiency.

2, If you use PS/2 connector, please use the

USB to PS/2 adaptor and connect with the

connector before your computer start-up.

3, For laptop, you may connect the receiver

directly with the USB connector.

ID Setup

1, Please move the mouse near to the

receiver

2, Press the ID button of the mouse

bottom with some hard and

Push battery
cover

acuate object within 10 seconds, the

receiver light will flash very fast, a few

seconds later it will be on which shows

it is successfully to finish the digital

transmission between the mouse and

the receiver. You may start to use it.

3. Working distance: within 0.6-1.5 m

ID connect

Charge Function

When using mou se, if the red led of th e

low battery beside the wheel flashes, please

change batteries or charge them .The mouse

can use USB line to charge, connect one side

of USB line to the connector of the board, and

the other side to USB connector before the

mouse, thus it can successfully charge the

battery. It can charge while you use the mouse.

It is full within about 8-10 hours, and then

unplug the connector to stop the charge.

Please note that the time of charge may vary

when the degree of discharge is different.

Attention Please

1. Please don’t make the mouse far
away from the receiver in order to

work more smoothly.

2. You’d better use the mouse on the

white desk, in this way the batteries

can be used longer time. Please

remove the batteries if the mouse will

not be used for a long time or if you

travel outside.

3. This mouse with save power sleeping

functions, please press any key or

scroll the wheel to wake up the mouse

when it is sleeping.

4. If you want to take off the mouse

power,please continue to press the ID

switch of the mouse bottom over 3

secons.If you want to take on the
power,please click the ID switch once

again.

5. The optical mouse will not work freely

on a smooth desk ,glass, any

reflecting surface, 3D mouse pad.

6. When you move the mouse, if the light

of the battery before the receiver

flashes, which shows that the power
is nearly finished. Please change the

proper-sized new battery or charge it

immediately.

7. You can place the receiver in the

mouse when you want to carry the

mouse on business, and press the
switch of ID for a long time so as to

switch off the power.

Caution

Any changes or modifications not

expressly approved by the party

responsible for compliance could

void the user's authority to operate

the equipment.

Note

Note: This device complies with Part 15 of
the FCC Rules.

Low battery

Charge
connector

Operation is subject to the following
two conditions:

(1) This device may not cause

harmful interference , and

(2) This device must accept any

interference received,

interference that

including
may cause undesired

operation.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and
can radiate radio frequency energy and,
if not installed and used in accordan ce
with the instructions, may cause
harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:

* Reorient or relocate the

receiving antenna.

* Increase the separation between

the equipment and receiver.

* Connect the equipment into an

outlet on a circuit different from
that to which the receiver is
connected.

* Consult the dealer or an

experienced radio/TV technician
for help.