Eastern Times Technology DS 2512 User Manual

Manual

FCC Statement

Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions (1)this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

This device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.

Add: Building D,Nan An Industrial Area,Youganpu
Village, Fenggang Town,Dongguan City,
Guangdong,China

0DQXDO 0DQXDO 0DQXDO

Quick Start Guide

Model: GFT-M001

2.4G WIRELESS MOUSE

1. 2.4G wireless connection, operating range 10 meters.

2. PAN3205 sensor, low power and high performance.

3. DPI 800/1200/1600.

4. IR light tracing technology, works on most surfaces.

5. Energy saving design with low power indicator.

6. Plug & play Nano receiving adapter.

Before use:

1. Find the wireless mouse and Nano receiver in the box.

2. Plug the Nano receiver into a USB port on the Computer.

3. Install the AA battery into the Mouse.

4. The Mouse is ready to work.

3D Anti-skid Roller

Comfortable Right Key

Comfortable Left Key

Nano Receiver

Product specificationProduct feature



1.

DPI adjustable function:
With 3 adjustable DPI functions 800/1200/1600/, the initial
factory setting,will be on a default of 1200DPI.
Press the mouse left button and the right button 3 seconds to
switch from the DPI, which can switch between the third, until
you like speed.

Press the left mouse button
and the right button for 3
seconds to switch DPI.

2. Saving power mode and power switch
If mouse is out of working condition for 8 minutes, it will go
into power saving mode, press any button to restart it.

:NKXKIKO\KXYRUZ:NKHGZZKX_IU\KX

3. Nano receiver:
The Nano receiver is very small in design, it can be plugged
into a USB port on the computer. The Portable design is ideal
for travel. The Nano receiver can be stored in the slot
next to the battery under the mouse.

Reprogramming the devices

1. Re-plug the Nano Receiver

2. Press right button+Midele button (scroll wheel button) and
hold for few seconds then the mouse connection successful.