Eastern Times Technology DS 2075 Users manual

000/XP

n

Ô

b

t

r

k

m

b

c

w

m

r

n

Press the button to

°´Ñ¹¿ª¸ÇÅ¥Ò

open the upper cover

±ã´ò¿ªµç³Ø¸Ç

Then press the button of the

ÔÙ°´·

CS new AA alkaline batteries

e mouse upper cover and pull the

Please see the reference picture)

es correctly according to the polarity

oves.

rs forward, when you hear ”crack”

s the battery cover is locked

r, please use the USB to PS/2 adaptor

ector before your computer start-up.

ect the receiver directly with the USB

re is a little far between the case and

suggest you use an extended USB

ase and the receiver, so you can place

rking surface conveniently.

ID Setup

1. Please move the mouse near to the receiver

2. Press the ID button of the receiver by your hand, the receiver

light begin to flash

3. Press the ID button of the mouse bottom with some hard and

acuate object within 10 seconds, the receiver light will flash very

fast, a few seconds later it will be on which shows it is

successfully to finish the digital transmission between the mouse

and the receiver. You may start to use it.

4. Working distance: within 1-2 meters.

Attention Please

1. Please don’t make the mouse

to work more smoothly.

2. You’d better use the mouse

atteries can be used longer

the mouse will not be used fo

3. This mouse with save power

key or scroll the wheel to wa

4. If you want to take off the

the ID switch of the mouse

take on the power,please cli

5. The optical mouse will not

any reflecting surface, 3D

6. No need to check the digital

change the batteries, if mo

above way to re-operate.

Caution

Any changes or modificatio