Eastern Times Technology 2292 Users manual

DS-2292 Bluetooth Laser Mouse User’s Guide

（BROADCOM solution ）
Thanks for using this product, which is the latest development Bluetooth
Optical Mouse. This creative and easy-to-use Bluetooth Mouse will bring
you a whole new wireless life experience.
System Requirement

z Mouse compatible with standard Microsoft Mode.
z IBM compatible PCs running Windows Operating System which supports

USB devices.

Main Features

z Use BROADCOM 2042 Chipset with wireless Bluetooth 2.0 interface
z Use Avago A7530 laser IC, with resolution 1600DPI by default.
z Unique super energy saving mode, battery life longer than similar

products by 50% to a maximum period of 6 months.

z With a USB retractable cable to charge battery when it is used up.
z Ergonomic design
z Come with particular power managing software, indicates the power

capacity in Microsoft Windows System automatically

z Support battery turn off, it will protect the battery.
z Use the Bluetooth industry leading software solutions, WIDCOMM BTW

(Microsoft officially designated software) Bluetooth software

z Built-in software solutions with Bluetooth human interface device and

comply with the standard version of the Bluetooth SIG Bluetooth 2.0

z Work with Windows 98, ME, 2000, Server 2003, XP and Vista
z AAA NiMh battery x2, voltage 1.2V.
z Frequency band: 2.4 - 2.4835GHz unlicensed ISM band
z Receiving sensitivity: -75bm (standard)

RF output power: up to 4bm as maximum, good for your health with

lowest radiates

z Operation distance: 10m
z Workable environment: 0-45°C
z Putting environment:-10-85°C

Humidity: 20%-50%

Precaution
! The optical mouse cannot work on a glass or mirror surface. Avoid operating
this mouse on a glossy surface. Otherwise, this mouse may not operate normally.
! For consideration of saving battery power, it is strongly recommended to
operate an optical mouse on a bright surface with fine texture to obtain lower
power consumption of the Agilest high illumination LED. A very dark surface will
cause higher power consumption.
! For a better transmission distance, avoid to use this device on a metal plate or
desktop because a large surface of iron, aluminum. Operating on a metal may
cause the transmission distance shorter.

Installation Guide
Step1. Inserting Batteries

1． Prepare two new AAA rechargeable batteries
2．Press the button of the mouse upper cover and pull the battery cover

rearward

3. Please insert the batteries correctly according to the polarity marks of
battery grooves.

4．Please see the bottom of this mouse, the Switch must be put on the “ON”

position. And the light at bottom of mouse will be lightened.

5．Finish the battery setup.

Mini USB port to charge

。

Battery groove

Battery cover

Power switch

ID switch

Step2. Connecting mouse to the Dongle and drive,
If you built-in the Bluetooth (Dongle) drive or have already installed Dongle,
please skim over this step.
Before you install the Bluetooth Mouse, please make sure that the Bluetooth
Dongle has been installed. Software available like Widcomm, IVT or the
Microsoft built-in software (can not connect to the headset).