Earthworks ICON-PRO User's Guide

ICON PRO

BROADCASTQUALITY

XLR STREAMING MICROPHONE

For more information, please visit
www.earthworksaudio.com or call 1-603-654-2433.

Thank you for purchasing the

Earthworks ICON Pro Streaming Microphone!

YOUR PURCHASE INCLUDES

1 ICON Pro Microphone with Custom Triad Orbit Stand

1 3/8" Thread Adapter

GETTING STARTED

PROPER MAINTENANCE

TROUBLESHOOTING

SPECIFICATIONS

Before setting up the microphone, pull back all existing settings and EQ. By doing this, you will have a
baseline understanding of how our microphones sound, and will then be able to adjust accordingly.

Begin by removing all included components from the packaging. Make sure to mute any incoming
signal to speakers or headphones to avoid any loud “pops” when connecting.

Connect the microphone to an audio interface supplying 24-48V phantom power using a standard
XLR cable. Please allow one minute for the microphone to settle. (Plugging in the microphone while
phantom power is turned on will not damage the microphone, and will actually settle the microphone
fa s te r.)

To guarantee your microphone provides years of performance, follow these guidelines:

• Avoid extreme heat and condensing humidity.

• Rough handling may damage the microphone even if no markings are visible.

• When not in use, keep the microphone in its case.

If you encounter issues while using your Earthworks Audio microphone, please make sure that:

• Your microphone is connected to an active power supply with phantom power on.

• Your microphone and XLR cable are well connected.

• The microphone is positioned at an appropriate distance from the sound source.

• External noise in your recording environment is kept to a minimum.

• Your recording space is at room temperature and free of dust.
If your issue persists after checking, please contact us via our website.

ICON PRO

Frequency Response 20Hz-30kHz

Polar Pattern Cardioid

Diaphragm Size Small

Peak Acoustic Input 139dB SPL

Power Source 24-48v Phantom Power

Signal-to-Noise Ratio 79dB (A weighted)

Noise 15dB SPL (A weighted)

Dimensions L x D 5.137" x 1.6"

Weight 1.5lb (0.68kg)

WARRANTY

37 Wilton Rd. Milford, NH 03055
[phone]
[e-mail]
earthworksaudio.com

© 2020 Earthworks, Inc

The ICON and ICON Pro carry a two-year limited warranty (parts and labor). Please register your warranty at:
earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our
warranty/repair department by email at: [e-mail].
NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/
received second-hand, please contact us via our website.